Manufacturing and construction both saw positive growth in employment in June. The net change in employed persons was negative 20.8 million in April followed by positive 2.7 million in May and positive 4.8 million in June. Table 1 breaks total employment down into service and goods-producing industries and then into private and government employees. Most […]
Virtual Summit Networking – better than in real life? The SMU Steel Summit Virtual Conference will have a strong focus on networking, to facilitate business and to give you that human connection. From the minute you enter the virtual venue you’ll be able to see everyone else who is there and can start networking and […]
The World Steel Association (worldsteel) expects steel demand to contract by 5.4 percent in 2020 to 1.654 billion metric tons. The latest Short Range Outlook forecasts a recovery to 1.717 billion tons in 2021, a 3.8 percent increase over this year. Commenting on the outlook, Chairman of the worldsteel Economics Committee Al Remeithi said: “The […]
In May, manufacturing gained back 17 percent of April’s job losses, while construction gained back 47 percent, according to the latest Bureau of Labor Statistics data. The net change in employed persons was negative 20.7 million in April and positive 2.5 million in May. Table 1 breaks total employment down into service and goods-producing industries […]
The Institute for Supply Management’s May Report on Business showed improvement, with the manufacturing PMI rising to 43.1 percent from a reading of 41.6 percent the previous month. The PMI score was at a contraction level not seen since April 2009, but the slight uptick was a promising sign. Manufacturers, however, continue to be guarded regarding […]
Neither rosy nor the voice of doom, IHS Markit analyst John Anton offered a realistic assessment of the U.S. economic recovery post-COVID-19 during Wednesday’s SMU Community Chat Webinar. Recovery from the current recession will not be a quick V-shaped rebound, said Anton, who is associate director of IHS Markit’s Pricing and Purchasing Service. Instead, he […]
By CRU Analyst Nikki Ni, from CRU’s Steel Monitor Over the past month, Chinese steel demand has accelerated, resulting in lower inventories while output remained at a high level. The ongoing demand recovery has improved the Steel PMI to 45.9 in April, up by 3.7pp m/m. Despite being below the 50-mark, the consecutive m/m improvement […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: I hope everyone had a peaceful and, above all, safe Easter and Passover holiday. If I missed any other celebrations over the last two weeks, I hope you will accept my apology and let me know about them. […]
Global manufacturing continued its downturn in March exacerbated by the COVID-19 pandemic. The J.P. Morgan Manufacturing PMI rose to 47.6 from 47.1 in February due to a stabilization of business conditions in China. China’s PMI jumped from 40.3 in February to 50.1 in March as manufacturing activity returned to more normal conditions after new coronavirus […]
A sharp decline in new orders and production drove the Institute for Supply Management Manufacturing PMI into contraction in March, falling to 49.1 from February’s reading of 50.1 percent. “The coronavirus pandemic and shocks in global energy markets have impacted all manufacturing sectors,” said Timothy Fiore, chairman of the Institute for Supply Management. New orders […]
By CRU Chief Economist Jumana Saleheen, from CRU’s Global Economic Outlook Overview March 2020 The global impact of Covid-19 has been profound. Lockdowns of countries and regions are now the norm. Uncertainty about the “end game” has fueled financial market volatility and prompted unprecedented government support. CRU is now forecasting a global recession in 2020; […]
John Packard is taking some time off… By most readings of the government guidelines, steel is considered an “essential” industry during this virus crisis. Mills that produce steel products, and by extension service centers that distribute them, are critical to getting the economy back on track. For some steel-consuming sectors, however, their “essentialness” may be […]
Three auto organizations have sent a joint letter to Congress requesting a delay for entry into force of the USMCA, currently scheduled for June 1. The CEOs of the Alliance for Automotive Innovation, the National Automobile Dealers Association (NADA) and the Motor & Equipment Manufacturers Association (MEMA) suggested several policy initiatives to address the COVID-19 […]
Editor’s note: Various states, counties and cities have issued some form of “shelter-in-place” or “stay-at-home” orders including California, Pennsylvania, New York, New Jersey, Oregon, Ohio, Connecticut and Illinois, as well as cities such as St. Louis, Kansas City, New Orleans and some counties in Colorado, Georgia and Idaho, among others. The list grows by the […]
Pennsylvania Gov. Tom Wolf ordered all non-life-sustaining businesses in Pennsylvania to close their physical locations as of 8 p.m. Friday, March 19, to slow the spread of COVID-19. Life sustaining businesses include grocery stores, gas stations, farms and transit systems. Due to the high volume of waiver requests, enforcement actions against businesses that do not […]
By CRU Analyst Arshiya Sibia and Research Manager Paul Butterworth, from CRU’s Steel Monitor Current information from our China team shows that steel demand is closely tracking our base case forecast for the impact of Covid-19, though steel production remains slightly higher than we had forecast. While our forecast was for steel demand to return […]
U.S. manufacturing activity grew only slightly in February, according to the latest Manufacturing ISM Report On Business. The Institute for Supply Management reported that the February PMI decreased 0.8 points to 50.1, just above the no-change mark of 50. The PMI for new orders fell into contraction at 49.8, while production dropped four points to […]
Writing with CRU’s Chief Economist Jumana Saleheen are Principal Consultant for Aluminum Wan Ling, Senior Analyst Richard Lu, Analyst Ruilin Wang and China office CEO John Johnson. Last week, CRU’s China offices in Shanghai and Beijing returned to work following the Chinese New Year holiday, which was extended due to the outbreak of novel coronavirus (Covid-19). This virus has had a heavy […]
Based on our analysis of 10 economic indicators, the decline in manufacturing slowed in February’s data. This report summarizes 10 data streams that describe the state of U.S. manufacturing in general and the steel industry in particular. We have reported on most of these separately in our Steel Market Update publications, and therefore will be […]
NLMK USA saw sales decrease 14 percent to 470,000 metric tons during the fourth quarter of 2019. Revenue from the segment dropped 18 percent quarter-over-quarter to $322 million. Declines were attributed to softer demand and lower steel prices. NLMK Group noted weaker demand in energy, automotive and machinery segments and a 4 percent drop in […]
The Port of Cleveland saw a significant decline in imports from Europe in 2019 due to tariffs and supply line disruptions. An increase in shipments from Canada, however, drove a 9 percent overall increase in cargo for the year. “Our European, cross-Atlantic imports were down approximately 35 percent, and our primary import from Europe is […]
Manufacturing grew in January along with the overall economy, reported the Institute for Supply Management. ISM’s January PMI gained 3.1 points from December to register 50.9, above the crucial no-change mark of 50. New orders and production pulled from contraction to post respective index readings of 52.0 percent and 54.3 percent for the month, said […]
Global manufacturing performed slightly better in January, according the latest J.P. Morgan Global Manufacturing PMI. The composite PMI rose to a nine-month high of 50.4 from December’s reading of 50.1, although only slightly above the no-growth mark of 50.0. Consumer and intermediate goods led the increase as investment goods continued to contract further. Output rose […]
By Principal Analyst James Campbell, from CRU’s Steel Plate Products Market Outlook The coronavirus outbreak in Wuhan has led to Chinese New Year holidays being extended and transportation restrictions introduced in order to contain the spread of the virus. Steel demand is normally weak during this period, but production continues as usual. Every day of […]
SSAB Americas posted a loss of $23 million (-222 million SEK) for the fourth quarter of 2019 due to lower realized steel prices and maintenance costs associated with a planned outage in Mobile, Ala. Heavy plate demand was good in the first half of the year, but weakened in the fourth quarter due to inventory […]
Durable goods orders rose 2.4 percent in December supported by a surge in defense spending. Defense capital goods increased 90.2 percent last month primarily due to orders for defense aircraft, the Census Bureau reported. The uptick in December orders follows a sharp decline in November of 3.1 percent, revised downward from 2.1 percent. Excluding the […]
Steel Market Update is pleased to share this Premium content with Executive-level members. For more information on how to upgrade to a Premium-level subscription, email Info@SteelMarketUpdate.com. Based on Steel Market Update’s analysis of 10 indicators in January, the decline in U.S. manufacturing continues. This report summarizes 10 data streams that describe the state of U.S. […]
The Senate voted its approval of the United States-Mexico-Canada Agreement in a sweeping 89-10 bipartisan vote on Thursday. The trade agreement now goes to President Trump for signature. The Canadian parliament is expected to follow suit, allowing the USMCA to be implemented later this year. The final agreement adds language addressing the internet, digital services and […]
The December Manufacturing ISM Report on Business showed economic activity contracting in the U.S. last month. The PMI fell 0.9 points to 47.2 percent and its lowest reading since July 2009. A PMI below 50 indicates business is contracting and a reading above 50 indicates expansion. The December PMI marks the fifth consecutive month of contraction. […]
About half of the nations surveyed by J.P Morgan and IHS Markit ended the year with manufacturing PMIs in contraction, with conditions especially poor in the Eurozone. The J.P. Morgan Global Manufacturing PMI fell to 50.1 last month from 50.3 in November indicating business conditions remained weak at the end of 2019. The intermediate and […]