Based on Steel Market Update (SMU) analysis of the recently released MSCI service center inventory and shipment data, total service center carbon steel shipments decreased by 201,800 tons in April to 3.305 million tons. Shipping days at 22, the same as March. On a tons per day basis (t/d) shipments decreased from 159,400 in March […]
The piece below was published to our Premium level members earlier this week, but we would like to share it with our Executive level members as an example of what our Premium members have access to. This report goes into much more depth than our Apparent Steel Supply article published last Thursday. If you are […]
This report compares domestic mill shipments and total supply to the market to enable a side by side comparison and the degree to which imports have absorbed demand. Sources are the American Iron and Steel Institute and the Department of Commerce with analysis by SMU. Table 1 shows both supply and mill shipments of sheet […]
Licensed data for April was updated on May 5th through the Steel Import Monitoring System of the US Commerce Department. The SMU publishes several import reports ranging from this very early look using licensed data to the very detailed analysis of final volumes by district of entry and source nation which is available to our […]
ArcelorMittal reported a net loss of $728 million in first quarter 2015 compared to a loss of $955 million in fourth quarter 2014. EBITDA was $1.4 billion. Steel shipments were up 3 percent year over year to 21.6 million tonnes. Iron ore shipments rose 5 percent to 9.4 million tonnes. Total sales for the company […]
According to the latest data released from the US Department of Commerce and the American Iron and Steel Institute, apparent steel supply for the month of March 2015 is 9,575,903 net tons. Apparent steel supply is calculated by adding domestic steel shipments and finished US steel imports and subtracting total US steel exports. March supply […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. The total number of indicators considered in this analysis is currently 36. Please refer to Table 1 for the view of the present situation and the quantitative measure of trends. Readers should […]
US Steel spoke at length on the impact that unfairly traded imports have had on results in first quarter. Although, CEO Mario Longhi could not give an estimate for when the next trade case will be filed he did respond, “What I can tell you, it’s not a question of if; it’s a question of […]
SMU Service Center Apparent Excess The Metal Service Center Institute (MSCI) released U.S. steel distributor shipments and inventories earlier today. We have a separate article which goes into detail in both flat and long products in this newsletter. This article focuses on our flat rolled steel Service Center Inventory Apparent Excess/Deficit forecast for the month […]
Total service center carbon steel shipments increased in March by 321,400 tons to 3.507 million tons. Shipping days at 22 were 2 more than February. On a tons per day basis (t/d) shipments increased from 159,300 in February to 159,400 in March. In the twelve years since 2004, March shipments on average have been 1.2 […]
Licensed data for March was updated on April 7th through the Steel Import Monitoring System of the US Commerce Department. The SMU publishes several import reports ranging from this very early look using licensed data to the very detailed analysis of final volumes by district of entry and source nation which is available to our […]
According to the latest data released from the US Department of Commerce and the American Iron and Steel Institute, apparent steel supply for the month of February 2015 is 8,968,831 net tons. Apparent steel supply is calculated by adding domestic steel shipments and finished US steel imports and subtracting total US steel exports. February supply […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. The total number of indicators considered in this analysis is currently 36. Please refer to Table 1 for the view of the present situation and the quantitative measure of trends. Readers should […]
A note to those interested in attending our Steel 101: Introduction to Steel Making & Market Fundamentals workshop in May. The workshop is about 50 percent fully registered at this time. The location is Merriville, Indiana just outside of Chicago. Our mill tour will be of the NLMK Indiana electric arc furnace (EAF) plant which […]
Total service center carbon steel shipments in February decreased by 182,800 tons to 3.185 million tons. Shipping days at 20 were one less than February. On a tons per day basis (t/d) shipments decreased from 160,400 in January to 159,300 in February. In the eleven years since 2004 February shipments on average have been 0.1 […]
Ryerson Holding Company, a leading distributor and processor of metals, announced a net loss of $25.7 million for 2014. Revenues increased 4.7 percent last year to $3.6 billion, but $32.7 million in IPO-related expenses and costs associated with partial redemption of Senior Notes negatively impacted earnings. “We showed year-over-year improvement in our key metrics for […]
Licensed data for February was updated on March 3rd through the Steel Import Monitoring System of the US Commerce Department. Steel Market Update publishes several import reports ranging from this very early look using licensed data to the very detailed analysis of final volumes by district of entry and source nation which is published in […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. The total number of indicators considered in this analysis is currently 36. Please refer to Table 1 for the view of the present situation and the quantitative measure of trends. Readers should […]
After negotiations were completed for February scrap pricing, the word being spread around the industry was to expect another drop in March, perhaps down $20 on most grades. However, the weather got brutal during the month and we are hearing that many dealers will not be able to complete deliveries on obsolete grades of ferrous […]
Have I mentioned lately that our next Steel 101 workshop will be held in the Chicago area and will include a tour of the NLMK Indiana mini-mill? Details are on our website or you are welcome to contact our offices at: 800-432-3475 or info@SteelMarketUpdate.com. We believe this will be another excellent program as we bring […]
Total service center carbon steel shipments in January increased by 372,400 tons to 3.368 million tons. There was a decrease of one shipping day to 21 in January. On a tons per day basis (t/d) shipments increased from 126,200 in December to 160,400 in January. In the eleven years since 2004 January shipments on average […]
Apparent steel supply for the month of December 2014 was 10,020,704 net tons, the sixth month in 2014 to be above the 10 million ton mark. Steel Market Update calculates our apparent steel supply figure by combining total domestic steel shipments with finished US steel imports and subtracting total US steel exports. December supply represents […]
Licensed data for January was updated on February 3rd through the Steel Import Monitoring System of the US Commerce Department. The SMU publishes several import reports ranging from this very early look using licensed data to the very detailed analysis of final volumes by district of entry and source nation which is published in our […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. The total number of indicators considered in this analysis is currently 36. Please refer to Table 1 for the view of the present situation and the quantitative measure of trends. Readers should […]
I was conversing with a consulting friend who reported to me that steel prices are taking a beating in Europe. He referenced hot rolled prices being offered out of Russia into Europe for 365 to 375 euros. He also reported that the sales of the Italian steel mill, ILVA would not succeed and the mill […]
A lot has already been written about the dramatic decline in oil prices, the persistent high imports of energy tubulars, and related issues. What is missing, in my opinion, is some perspective and context to pull it all together. The purpose of this article is to show why the energy sector is so important to […]
Gulf ports are not experiencing the horrific congestion issues seen in the West. Fleetwood Port Logistics, out of Houston and Savannah, that deals primarily in break bulk steel products, has seen little to no congestion at the primary discharge terminal of North City Docks, Port of Houston. There has been some congestion at the smaller […]
Apparent steel supply for the month of November 2014 is 9,637,349 net tons. Apparent steel supply is calculated by adding domestic steel shipments and finished US steel imports and subtracting total US steel exports. November supply represents a 1,044,666 ton or 12.2 percent increase compared to the same month one year ago. This is primarily […]
This is our second article about foreign steel imports where we look deeper into imports from a three month moving average perspective. We also look at the complete picture by analyzing both long and flat rolled steel products. License data for December was updated on January 6th through the Steel Import Monitoring System of the […]
The Chinese central government announced on Wednesday that it would remove the export rebate on certain boron-added steel products effective January 1, 2015. The move was anticipated by our sources in China however the impact of the move may be minimal and short-lived. Steel Market Update received the following information from one of our steel […]