Steel Dynamics Inc. provided guidance on fourth-quarter earnings, predicting a lower sequential quarter. Planned outages at the company’s flat rolled divisions resulted in higher costs and lower value-added shipments, reducing pretax earnings by approximately $27 million. Flat rolled steel pricing declined at a steeper rate than prices for scrap raw material. The long products division […]
Service center shipments in November declined by 2.5 percent, close to the normal seasonal change for this time of year, according to Steel Market Update’s analysis of Metals Service Center Institute data. Daily shipments in November were 2.5 percent lower than in October. On average since 2009, November has decreased by 2.1 percent from the […]
Steel Market Update’s next Steel 101: Introduction to Steel Making & Market Fundamentals Workshop will be held in Merrillville, Ind., on March 28-29, 2018. The two-day session will include a tour of the NLMK USA steel mill. • Do you have new employees who would benefit from learning about steel making (EAF and Integrated Process), […]
Rolled steel imports into the United States declined by 12.7 percent in the three-month period from September-November, compared with the prior three months, June-August. Sheet products declined by 11.4 percent on the same basis, according to weekly licensed import tonnages reported by of the U.S. Department of Commerce on Dec. 5. The data is reported […]
Steel Market Update’s steel market indicators show improved trends in the November data. In our examination of data released in November, our view of the present situation is that 47.2 percent of the 36 indicators are historically positive with only 19 percent negative. The balance is within the band of historically normal. The total of […]
Service center shipments in October exceeded expectations, led by long products and plate, according to Steel Market Update’s analysis of Metals Service Center Institute data. Daily shipments in October were 1.9 percent higher than in September. On average since 2009, October has decreased by 1.9 percent, therefore these latest numbers were better than the historical […]
As I move around the flat rolled steel industry, communicating with manufacturing companies, service centers, traders and steel mills, I am receiving mixed messages about the market. A good example is the HARDI steel committee conference call that was held earlier today. HARDI wholesalers, the companies who supply the HVAC mechanical contractors in the building […]
Total rolled steel imports declined by 14.0 percent in the three months through October, compared to the three months through July. Sheet products were down by 12.6 percent on the same basis, based on final license data for October reported by of the U.S. Commerce Department on Nov. 7. The data is reported within the […]
Registration is now open for Steel Market Update’s next Steel 101: Introduction to Steel Making & Market Fundamentals workshop. This steel training workshop will be held at the Hilton Garden Inn in Merrillville, Ind., located just outside of Chicago. As part of this workshop, we will be touring the NLMK USA Portage, Ind., steel mill. […]
Commercial Metals Co., a Texas-based long products producer and scrap recycler, reported a profitable fiscal 2017 despite imports of rebar and other products that continue to squeeze margins. CMC management is hopeful the company will get an assist from Washington in the coming year. “The need for infrastructure renewal is overwhelming, but the issue is […]
Steel Dynamics and CEO Mark Millett are expecting a tighter steel market in the fourth quarter. After surging ahead of possible Section 232 trade action, import levels have declined and, coupled with strengthening order rates and longer lead times, steel prices are expected to appreciate significantly, said Millet in remarks during the company’s quarterly conference […]
Service centers’ daily steel shipments in September were 0.9 percent higher than in August, matching the average since 2009. Therefore, the latest numbers were exactly on the historical track for this time of year, according to Steel Market Update’s analysis of Metals Service Center Institute data (MSCI). Carbon steel shipments were 144,400 tons per day […]
Total rolled steel imports declined by 5.8 percent in the three months through September, compared with the three months through June. Sheet product imports were down by 3.9 percent on the same basis. The final license data for September was reported by of the U.S. Commerce Department on Oct. 3. The data is reported within […]
An explosion at the Gerdau long products steel mill in Wilton, Iowa, injured three employees and a contractor on Wednesday night. The incident occurred in the facility’s melt shop and resulted in temporary suspension of operations. Gerdau Ameristeel is working with authorities to investigate and determine the cause of the explosion. “Gerdau’s priority is attending […]
Steel Dynamics expects third-quarter financial results to be similar to the second quarter. Higher shipments during the quarter were somewhat offset by metal spread compression. Average quarterly pricing is expected to be consistent with the second quarter, but average scrap prices will be higher. SDI notes continued high import levels are impacting the ability of […]
Service center shipments in August failed to perform as well as the average since 2009, according to data from the Metals Service Center Institute. Daily shipments in August were 1.8 percent higher than in July. On average since 2009, August has increased by 3.0 percent, therefore the latest numbers were less than the historical average […]
Total rolled steel imports increased by 10.8 percent in the three months through August compared to the three months through May. Sheet product imports rose by 14.3 percent on the same basis, according to final license data for August reported by the U.S. Commerce Department on Aug. 6. The data is reported within the Steel […]
Half of the 36 Key Steel Market Indicators released in August are historically positive, while only 19 percent are negative, and the balance fall within the normal range, in Steel Market Update’s view. Along with May, when the data was about the same, this is the best outlook since we began our analysis in January […]
In June and July, China registered its highest share of global steel production ever, according to World Steel Association data with analysis by Steel Market Update. Global crude steel production in the month of July totaled 143,245,000 metric tons, up from 141,331,000 metric tons in June. Capacity utilization was 71.7 percent, down from 73.0 percent […]
Service center shipments took the normal dip in July, but the decline was slightly more than the historical average. Months on hand at the end of July were up sharply, partly because of a decline in shipping days, according to Steel Market Update’s latest analysis of Metals Service Center Institute data. Daily shipments in July […]
Total imports of rolled steel increased by 16.9 percent, and sheet products by 18.4 percent, in the three months through July, compared with the prior three months, according to final license data for July released by the U.S. Commerce Department on Aug. 1. The three-month moving average (3MMA) of the total volume of rolled product […]
In the Key Indicators data released in July, both the present situation and trends have recovered from what now appears to have been a temporary downward blip in June. Trends lead the present situation by about four months. An explanation of the Key Indicators concept is given at the end of this piece for those […]
ArcelorMittal’s NAFTA segment posted sales of $4.6 billion, a 3.3 percent decline from first quarter. Operating income decreased to $378 million from $396 million and EBITDA fell 3.3 percent to $506 million. Although average steel prices were higher in second quarter, they were offset by lower shipment volumes and higher costs, including planned maintenance at […]
The U.S. Department of Commerce (DOC) released new foreign steel import license data on July 18. The trend for July is for steel imports to remain quite high, in the mid 3-million-net-ton range. We expect imports to be lower than June’s 3.9 million net tons, but above the 12-month and 3-month moving averages. Finished steel […]
The growth of service center shipments in June beat the average performance since 2009, according to data from the Metals Service Center Institute (MSCI). Inventories tend to be lower at mid-year, which is the case in 2017. Daily shipments in June were 0.8 percent higher than in May. On average since 2009, June has decreased […]
The final license data for June was reported by the Steel Import Monitoring and Analysis system of the U.S. Commerce Department on July 5. An explanation of the methodology that we at SMU use to analyze the trade data is given at the end of this piece. All volumes in this analysis are reported in […]
This is my gut feeling, my opinion based on what I have been reading and watching in the news like everyone else. The world is trying to figure out if President Trump is going to start a trade war and the first bullets are made with flat rolled steel, pipe and long products. I am […]
An explanation of the Key Market Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. This will explain the difference between our view of the present situation, which is subjective, and our analysis of trends, which is based on the latest facts available. In the June […]
Schnitzer Steel, a metals recycler and steel bar producer, reported its best third quarter since FY 2012. Total revenue increased 36 percent sequentially and 25 percent year-over-year to $477 million. Net income was up 50 percent from second quarter and 51 percent from Q3 2016 to $17 million. The improvement was primarily in the company’s […]
Daily shipments by service centers in May decreased by 1.4 percent from April’s result. On average since 2009, May has increased by 1.3 percent, therefore these latest numbers were a little worse than normal for this time of year. Carbon steel shipments were 148,500 tons per day in May and months on hand on the […]