This report examines the import share of sheet, plate, long and tubular products and 16 subcategories through September. Table 1 shows total supply to the market in three months through September and in 12 months through September for the four product groups and the 16 subcategories. Supply to the market is the total of domestic […]
By CRU Steel Analyst Ryan McKinley CMC’s expanded footprint across the United States, following its acquisition of Gerdau’s assets, raises the probability that a rebar price increase is on the horizon. That said, price increases may be short-lived as Nucor works to bring two of its newest micro mill projects online in 2019. Rebar prices […]
Total rolled product imports declined by 20.4 percent in October, versus the same month last year, measured as a three-month moving average, but the effects of Section 232 are still not clear. This early look at October’s import volume is based on Commerce Department license data (see explanation below). Figure 1 shows the tonnage of […]
Metals distributor Ryerson Holding Corp. reported a revenue gain of 44.6 percent year-over-year to $1.25 billion for the third quarter of 2018. Revenue was up 18.2 percent compared to the second quarter, driven by an increased average selling price and higher volume shipped. Net income attributable to Ryerson Holding Corp. was $77.5 million for the […]
ArcelorMittal Group third-quarter net income dropped by nearly half to $0.9 billion from $1.9 billion in the second quarter and declined 25 percent from $1.2 billion a year ago. EBITDA fell 11.2 percent from the second quarter to $1.7 billion due primarily to lower steel shipments and high inflation rates in Argentina, the company said […]
A strong economy and equally strong steel demand propelled Nucor Corp. earnings growth in the third quarter. Nucor reported earnings of $676.7 million in the third quarter, which included a non-cash impairment charge of $110.0 million related to its natural gas well assets. In comparison, second quarter net earnings were $683.2 and third quarter 2017 […]
Rolled product imports into the United States were down by 21.6 percent in September on a three-month moving average basis compared with the prior year, according to Steel Market Update’s latest analysis of import license data. Figure 1 shows the tonnage of total rolled steel and semi-finished imports through September on a 3MMA basis. The […]
Steel Market Update will conduct one of our popular Steel 101: Introduction to Steel Making & Market Fundamentals workshops in Toledo, Ohio, on Dec. 11-12. We are working with North Star BlueScope, which will provide attendees with a tour of their electric arc furnace, caster and hot strip mill (all of the fun stuff). The […]
Steel Dynamics is expecting third-quarter profitability to exceed second-quarter results, based on strong underlying demand and meaningful metal spread expansion. Average price for steel products is outpacing scrap costs for the quarter resulting in increased profitability for SDI’s sheet and long product steel operations. “Based on strong steel demand fundamentals and customer optimism, the company […]
Steel Market Update steel training workshops continue to be very popular. We are finding many companies sending their new people to our flagship Steel 101 workshop. This workshop is excellent for those new to the industry; however, it is not just for new employees. It is an excellent way to expand the knowledge base of […]
Are the Section 232 tariffs affecting the volume of steel imports? We will look at this several different ways, as the answer depends on what time frame is chosen for comparison. Commerce Secretary Wilbur Ross said on Aug. 10 that since the imposition of Section 232 tariffs in March, imports to the U.S. have declined […]
Editor’s note: The following was contributed by analysts at the CRU Group. The Turkish-U.S. political relationship has soured sharply in the past week. U.S. President Donald Trump tweeted relations were “not so good” on Friday, Aug. 10, and doubled tariffs on U.S. imports of Turkish steel. Turkish President Erdogan responded with anger, suggesting the country […]
The U.S. trade situation is causing some consternation, according to analysts at CRU. During a webinar on Tuesday, which was made available to SMU member companies, analysts discussed the trade measures that have been instituted by the Trump administration and the potential impact on the U.S. and global economies. Steel and aluminum tariffs were imposed […]
Steel Market Update offers this early look at July’s import volume based on license data (see explanation below). The analysis evaluates the pressure that imports are having on individual products at the national level, but gives no indication of regional differences. SMU has developed a new series of regional reports for the six main flat […]
ArcelorMittal NAFTA posted sales of $5.4 billion for the second quarter of 2018, a jump of 12.7 percent from the first quarter. Steel shipments increased by 4.4 percent to 5.8 million metric tons. Improved results were driven by strong market demand and higher shipment volumes. NAFTA segment EBITDA rose 19.6 percent year-over-year. NAFTA segment crude […]
Following on declines in August and September, ferrous scrap prices in October are settling at an increase of $20 per ton for prime grades and $10 per ton for obsolete grades, according to Steel Market Update sources. A dealer in the Northeast reports that the Detroit market has bought Busheling at $390/GT, up $20; Shredded […]
This Steel Market Update report examines the import share of sheet, plate, long and tubular products and 16 subcategories through May. Table 1 shows total supply to the market in three months through May and in 12 months through May for the four product groups and the 16 subcategories. Supply to the market is the […]
Flat rolled steel imports into the United States continue to decline. The three-month moving average (3MMA) for rolled product imports into the U.S. year over year was down by 11.3 percent as of June, according to Steel Market Update’s latest analysis of Commerce Department license data. This is an early look at June’s import volume […]
This Steel Market Update report examines the import share of sheet, plate, long and tubular products and 18 subcategories. Table 1 (click to enlarge) shows total supply to the market in three months through April and in 12 months through April for the four product groups and the 18 sub-categories. Supply to the market is […]
Total rolled steel product imports declined in May, but increased by 24.1 percent from March through May, compared with the prior three-month period. Total rolled steel product imports in May declined by 18.8 percent following April’s 17.0 percent increase. Sheet products were down by 22.6 percent, longs were down by 8.9 percent and tubular goods […]
Steel Market Update’s analysis of import market share for sheet, plate, long and tubular products and their 18 subcategories shows big disparities by product type. Table 1 shows total supply to the market in three months through March and in 12 months through March for the four product groups and the 18 subcategories. Supply to […]
For steel producers, there’s a strong correlation between capacity utilization and profits. Steel Market Update tracks capacity utilization for both flat and long products and both have been on the upswing since early 2018, at least in part due to the effects of the Trump administration’s plans to impose tariffs on steel imports. From January […]
ArcelorMittal NAFTA posted sales of $4.8 billion for the first quarter of 2018, up 10.6 percent sequentially. Steel shipments increased 4.8 percent from the fourth quarter to 5.9 million metric tons driven by higher volume of flat products due to improved market fundamentals. Average selling price increased 3.5 percent for flat products and 9.1 percent […]
Total rolled steel product imports in April were the highest since last June and semi-finished imports were the highest since October 2014 as offshore mills hurried to ship steel ahead of the tariffs that were expected to take effect May 1. Total rolled steel product imports in April were up by 17.0 percent from March’s […]
Key market indicators tracked by Steel Market Update are at an all-time high for April but have shown signs of weakening in the past few months. Data released in April shows that 18 of the 36 indicators are historically positive with only 5 negative. The balance is within the historically normal band. Trends took a […]
This is Steel Market Update’s first Key Market Indicators report since April as we have renegotiated some data supply contracts and made a few changes to the content. The report still summarizes 36 data streams that we believe critically describe the state of the steel market and provide forward guidance to steel buyers. Data released […]
Steel Market Update is sharing this Premium content with Executive-level readers. For more information about upgrading to a Premium-level subscription, email Info@SteelMarketUpdate.com. Key market indicators in December were at an all-time high in the history of Steel Market Update’s analysis, but trends are deteriorating. This report summarizes 36 data streams that we believe critically describe […]
Steel Market Update’s scrap sources expect ferrous scrap prices to drop by at least $10-$20 per ton in May, and possibly as much as $30-$40 per ton, as spring weather increases the scrap flows and boosts supply. Adding to the downward pressure on prices, they report, is weakness in the global market. One dealer in […]
Steel Market Update’s scrap sources expect ferrous scrap prices to drop by at least $10-$20 per ton in May, and possibly as much as $30-$40 per ton, as spring weather increases the scrap flows and boosts supply. Adding to the downward pressure on prices, they report, is weakness in the global market. One dealer in […]
Metals Service Center Institute data shows that service center shipments in March were slightly less than the seasonal norm. Daily shipments in March were down by 0.8 percent from the February result. On average since 2009, March shipments have increased by 0.3 percent; therefore, these latest numbers were seasonally slightly worse than the historical average […]