December’s licensed import volume for rolled steel products was the lowest since December 2009. Year over year, total rolled product imports in December were down by 27.8 percent on a three-month moving average (3MMA) basis. This follows the 27.4 percent decrease in November, 17.7 percent decrease in October and 15.5 percent decline in September on […]
By CRU Analysts, from CRU’s Bulk Ferroalloys Monitor U.S. finished steel prices have risen following price increase announcements that found support from service center restocking. Adding to this price support was the scrap market, where scarcer supply and increased mill demand put prices on an upward trajectory. Some steel products have enjoyed quicker price gains […]
Steel Market Update is pleased to share this Premium content with Executive level members. For more information on how to upgrade to a Premium-level subscription, email Info@SteelMarketUpdate.com. Key Market Indicators showed a substantial improvement in market trends in the December data. This report is designed to be a big picture summary of data SMU has […]
Key Market Indicators showed a substantial improvement in market trends in the December data. This report is designed to be a big picture summary of data SMU has reported in detail during the month. It summarizes 36 data streams that describe the state of the steel market and provide forward guidance for steel buyers and […]
By CRU Prices Analyst George Pearson, from the CRU Steel Sheet Products Monitor Sheet prices in the U.S. were mixed this week. HR coil at $555 was steady w/w, falling by $2 /s.ton, while CR and HDG coil products gained $26-30 /s.ton w/w after steadying last week. For HR coil, overall volume has picked back […]
Steel Market Update is pleased to share this Premium content with Executive-level subscribers. For information on how to upgrade to a Premium-level subscription, email Info@SteelMarketUpdate.com. Steel production in the U.S. in 2018 was the highest since 1981, according to the World Steel Association, which released its statistical yearbook for 2018 on Dec. 16. Crude steel […]
In October, demand for sheet products declined by more than the seasonal norm. Demand for long products is softening as construction expenditures decline. This analysis by Steel Market Update is based on steel mill shipment data from the American Iron and Steel Institute (AISI) and import-export data from the U.S. Department of Commerce (DoC). The […]
New rounds of flat rolled price increases began on Friday with ArcelorMittal USA and NLMK USA taking the lead at $40 per ton. My expectation is the other mills will follow on Monday and Tuesday of this week. Watch lead times – with some of the mills they are beginning to stretch. Steel Dynamics has […]
By CRU North America Senior Analyst Ryan McKinley, from CRU’s Steel Metallics Monitor The CRU metallics price indicator (CRUmpi) rose by 7.9 percent m/m to 211.1 (see chart) following price increases in nearly every market. Pervasive market tightness caused by adverse weather and higher domestic demand in major exporting markets forced buyers in import-reliant markets to accept higher […]
This Steel Market Update report examines the import share of sheet, plate, long and tubular products and 16 subcategories. Since January, there has only been one month when the import market share of total sheet products exceeded 15 percent. The import share of HRC has been below 10 percent since January. The most striking result […]
CNBC reported comments made by White House Economic Advisor Larry Kudlow on Tuesday saying, “The reality is those tariffs are still on the table.” This is in reference to the tweet from President Trump regarding steel from Brazil and Argentina. Steel buyers should be aware that there has not been a presidential proclamation, or anything […]
SMU Events is pleased to update the status of our popular Steel 101: Introduction to Steel Making & Market Fundamentals Workshops as well as more information on the 2020 SMU Steel Summit Conference. For those interested in attending one of our Steel 101 workshops. Our California workshop is now 90 percent full. We have approximately […]
By CRU Principal Analyst James Campbell, from CRU’s Long Products Monitor Steel longs prices have changed direction this month with rises now observed in many markets. Although underlying demand has improved in some regions it is still weak elsewhere. Buyers in many regions have restocked in the last month while producers exposed to scrap and […]
By CRU Chief Economist Jumana Saleheen, from CRU’s Global Steel Trade Service This piece sets out insights gained from a visit to CRUs Beijing office. The trade war has been an unexpected headwind to China’s economy and there is a real concern about the risks of a sharper than desirable growth slowdown. In response the government […]
November’s licensed import volume of total rolled steel products was the lowest since February 2010. Year over year, total rolled product imports in November were down by 27.4 percent on a three-month moving average (3MMA) basis. This follows the 17.7 percent decrease in October and 15.5 percent decline in September on the same basis. This […]
By CRU Senior Analyst Ryan Smith and Senior Consultant Sarah Macnaughton, from CRU’s Crude Steel Market Outlook Climate change is moving up the political agenda and putting increasing pressure on heavy industry to reduce their CO2 emissions. As the largest producer of global industrial CO2 emissions, the steel sector has a clear role to play in meeting […]
Chicago-based UPG Enterprises LLC (formerly Union Partners LLC) plans two big changes to the footprint of its Contractors Steel division, which it acquired in May 2018. UPG announced that it is consolidating Contractors Steel’s Livonia, Mich., service center into its Van Buren, Mich., facility to help streamline production and eliminate duplicate inventory. Equipment from the […]
By CRU Research Manager Paul Butterworth, from CRU’s Global Steel Trade Service Although profitability for domestic sales in China has fallen sharply in 2019, steel exports from the country have not risen. Historically, when domestic profitability dropped, exports would rise. Prior analysis has shown that the strength of the domestic market is a key driver […]
Demand for steel sheet products declined by more than the seasonal norm in September. This analysis by Steel Market Update is based on steel mill shipment data from the American Iron and Steel Institute (AISI) and import/export data from the U.S. Department of Commerce (DoC). The analysis summarizes total steel supply by product from 2003 […]
October’s licensed import volume of total rolled steel products continued the decline from September and was the lowest since February 2011. Rolled product imports in October were down by 17.7 percent on a three-month moving average (3MMA) basis year over year. This follows the 15.5 percent decline in September. This early look at October’s import […]
British Steel may soon have a new owner—China’s Jingye Group. British Steel has been under government receivership since May after it could no longer meet its financial obligations. At stake are 4,000 UK jobs at the Scunthorpe and Teeside plants, 1,000 in France and the Netherlands, and about 20,000 supply chain jobs. British Steel produces […]
Commerce Department Construction Put in Place (CPIP) data for September confirms the contraction that began in June 2019. CPIP expenditures data for September was released on Nov 1. Through September, total construction had negative momentum every month since October last year. In the period June through September, total construction declined each month on a year-over-year […]
By CRU Senior Analyst Ryan McKinley The rate of decline for U.S. domestic longs product prices is decelerating as steel buyers slowly return to the market and scrap market sentiment firms. Although not low, inventory levels have worked through enough for buyers to re-enter the market and conduct seasonal restocking. Still, domestic prices and demand […]
This report is designed to be a big picture summary of data we have reported in detail during the month. It summarizes 36 data streams that describe the state of the steel market and provide forward guidance for steel buyers and sellers. See the end of this piece for an explanation of the Key Indicators […]
There was much discussion at the NASA conference and in the wake of the conference regarding scrap pricing and where prices are headed for the month of November. The discussion on scrap has been a moving target over the past week or two. We checked with some of our sources earlier this month and we […]
By CRU Prices Analyst Estelle Tran U.S. steel sheet prices have fallen faster in early Q4 than initially expected, as lower demand levels, economic uncertainty and another $30-40 /l.ton decrease in scrap prices in October guided steel prices down. The CRU Midwest HR coil price assessment on Oct. 16 was $507 /s.ton, down $64 from […]
February was the first month for the import market share of total steel products, including semifinished, to fall below 20 percent since August 2009. The import share remained below 20 percent through August 2019 when it was 18.4 percent. Our data goes back to January 2003 in which time period the high import share was […]
Demand for sheet products spiked to over five million tons in August for the first time since August last year, though flat rolled demand remains tepid. Construction expenditures are softening and will reduce the demand for long products through the balance of 2019. This analysis by Steel Market Update is based on steel mill shipment […]
In September, the licensed import volume of rolled steel products was the lowest since February 2011, according to Steel Market Update’s analysis of the latest Steel Import Monitoring and Analysis (SIMA) data. Total rolled product imports in September declined by 15.5 percent year over year on a three-month moving average (3MMA) basis. This follows the […]
With U.S. Steel buying almost 50 percent of Big River Steel and holding an option on the remainder over the next four years, SMU thought it an appropriate time to review the list of announced changes being made by the mills in the United States, Canada and Mexico. We reviewed this listing with the four […]