According to Baker Hughes data from July 24, 2015, the U.S rig count for the week was 876 rigs exploring for or developing oil or natural gas. This is up 19 rigs when compared to last week, with oil rigs up 21 to 659 rigs, gas rigs down 2 to 216 rigs, and miscellaneous rigs […]
Domestic mill lead times are one of the keys followed by Steel Market Update as we evaluate steel prices and price momentum. A market where we see extending lead times tends to allow for the collection of higher steel prices throughout the industry (steel mills and distributors). When we see lead times collapsing we tend […]
We found a little bit of weakening in our price ranges on hot rolled, cold rolled and galvanized while Galvalume was slightly higher. We do not attribute any change in momentum with the numbers. We are of the opinion that the changes were related to the collection of data this week (with more emphasis on […]
On Friday, Steel Market Update (SMU) adjusted our Price Momentum Indicator from Higher to Neutral. Now why did we go and do that? We have been stuck in a very tight trading range on most flat rolled steels since late April of this year. Benchmark hot rolled, which is used by most in the […]
According to Baker Hughes data from July 17, 2015, the U.S rig count for the week was 857 rigs exploring for or developing oil or natural gas. This is down 6 rigs when compared to last week, with oil rigs down 7 to 638 rigs, gas rigs up 1 to 218 rigs, and miscellaneous rigs […]
The Metal Service Center Institute (MSCI) will report June inventories and shipments on Friday of this week. The world is keenly interested in how much steel the distributors are holding on their floors and how June will compare not only to May’s totals but to June 2014 totals as well. The real test, however, will […]
Not too hot (prices aren’t rising at a breakneck pace – or at all for that matter), not too cold (and they aren’t dropping either – at least not yet), just about right (Goldilocks pricing). Of course this perspective will vary depending on your view of the market and your ability to pass through the […]
Last week Steel Market Update (SMU) conducted our early July flat rolled steel market analysis (survey). We invited just under 600 companies to participate in our questionnaire which covered such items as Sentiment, pricing trends, purchasing trends, inventories, lead times, negotiations and more. We placed two questions early during the survey process where we ask […]
According to Baker Hughes data from July 10, 2015, the U.S rig count for the week was 863 rigs exploring for or developing oil or natural gas. This is up 1 rig when compared to last week, with oil rigs up 5 to 645 rigs, gas rigs down 2 to 217 rigs, and miscellaneous rigs […]
Earlier this week US Steel came out with a $40 per ton price increase. Since then the other mills have been eerily quiet not yet jumping on the bandwagon. It is normal for the smaller mills to wait and see if the larger mills will follow the lead. So far this week, they have not. […]
Even with a new price increase announcement out of US Steel (+$40) lead times remain flat compared to what we saw during the middle of June. All of the products, hot rolled, cold rolled, galvanized and Galvalume lead times are shorter than what we reported at the beginning of July 2014. Hot rolled lead times […]
The domestic steel mills are determined to keep pricing momentum on their side as US Steel became the first mill to announce a new round of price increases on flat rolled products. The US Steel announcement, which was made via the use of an internal memo to their sales group leaked to the industry, advises […]
Flat rolled steel prices have been struggling to keep momentum and move higher. We have not yet seen full compliance with the second price increase and now we have a new round of price increases beginning with the $40 per ton announced by US Steel this morning. We did see some minor changes to hot […]
The silence you hear is, we guess, the market on vacation… There was very little movement in flat rolled steel prices and lead times this week. We have price announcements, a coated trade case, union negotiations and now new trade language and the market is just absorbing it and continuing on as though everything is […]
June ended the same way it started with our SMU Price Momentum Indicator pointing toward higher flat rolled steel prices. This is now the second month in a row where our Momentum Indicator has been pointing up. Our Future Steel Buyers Sentiment Index averaged +61.5 for the month of June. However, the last report we […]
According to Baker Hughes data from June 26, 2015, the U.S rig count for the week was 859 rigs exploring for or developing oil or natural gas. This is up 2 rigs when compared to last week, with oil rigs down 3 to 628 rigs, gas rigs up 5 to 228 rigs, and miscellaneous rigs […]
The following article on the hot rolled coil (HRC), busheling scrap (BUS), iron ore and financial futures markets was written by Andre Marshall, CEO of Crunch Risk LLC and our Managing Price Risk I & II instructor. Here is how Andre saw trading over the past week: Financial Markets: On the S&P 500 we are […]
A quick note to those of you who have signed up, or will be registering for our 5th Steel Summit Conference in Atlanta on September 1 & 2nd. We found a little bug in the way our system looks at our members as they register for the conference. If you are logged into the website […]
When asked to report on how steel mill pricing was this past week, one coating mill told Steel Market Update, “Really nothing. It wasn’t up, nor down in my opinion. We are booking steadily. But people still have inventory so nobody is desperate or in a bind. Good lead time but not enough panic to […]
Earlier today (Tuesday, June 23rd) HARDI sponsored their monthly galvanized steel conference call. On the call were HVAC wholesalers who sell galvanized steel sheet and coil to the HVAC mechanical contractors around the United States and Canada. Also on the call were a number of galvanized steel service centers and manufacturing companies, all associated with […]
Lead times moved out slightly on three of the four flat rolled products: hot rolled, cold rolled and galvanized. The only product which essentially remained the same was Galvalume. Hot rolled lead times averaged 4 weeks, according to the results of this week’s flat rolled steel market analysis (survey). This is up from 3.66 weeks […]
As with lead times, our survey respondents are reporting steel mills as slowly regressing and moving away from negotiating flat rolled steel prices. Although we are seeing movement, the percentage of respondents reporting the mills as still willing to negotiate hot rolled, cold rolled, galvanized and Galvalume continues to be more than 50 percent. Hot […]
Coated steels continued to be the strongest products on the heals of AD/CVD suits having been filed on the products along with the new price increase announcements by the domestic mills. We heard from a number of galvanized buyers that the offers out of the steel mills all begin with a three (as in $30.00/cwt […]
Steel Market Update was analyzing data from our last flat rolled market survey just as the domestic mills began announcing price increases. We thought our readers might be interested in looking at the data with us and then guess as to whether the new price increases will “stick” or falter over time. In our opinion, […]
According to Baker Hughes data from June 12, 2015, the U.S rig count for the week was 859 rigs exploring for or developing oil or natural gas. The last time the active U.S. count was this low was back on January 17, 2003 at 845 rigs. This week’s total rig count is down 9 rigs […]
Last week anti-dumping suits were filed against corrosion resistant products (mostly galvanized and Galvalume) and we did see some tightening as the domestic mills try to move prices anywhere from $10 to $20 per ton on new spot offers. We are still early in the process with many buyers either not needing to buy or […]
The steel world (which is not as large as it used to be) is in New York City this week to attend (lobby call) the Steel Success Strategies Conference hosted by World Steel Dynamics and their AMM partners. It is the one place (other than SMU Steel Summit Conference – hint, hint) where one can […]
Twice per month Steel Market Update asks both manufacturing companies and service centers/wholesalers to weigh in on the subject of service center spot price offers. In the survey concluded on Thursday of this past week, with most responses having been locked in prior to the dumping suit announcement, we found manufacturers reporting mixed results. Thirty-eight […]
Lead times have not shot out since the price increase announcements were made in early May. Hot rolled lead times were reported as being 3.5 weeks at the beginning of May and one month later HRC lead times averaged 3.66 weeks according to the results of our most recent flat rolled steel survey. Lead times […]
According to Baker Hughes data from June 5, 2015, the U.S rig count for the week was 868 rigs exploring for or developing oil or natural gas. The last time the active U.S. count was this low was back on January 24, 2003 at 862 rigs. This week’s total rig count is down 7 rigs […]