US hot-rolled coil (HRC) prices law little movement this week, a similar trend seen in offshore markets. Thus, the price premium domestic hot band carries over imported products was largely unchanged vs. the prior week.
Sheet prices were mixed this week, with hot-rolled (HR) coil unchanged but cold-rolled and coated prices down.
I’m writing these final thoughts from the JW Marriott in Tampa. And I’m looking forward to seeing some of you reading this in just a few hours at the opening networking reception of the Tampa Steel Conference. Nearly 550 people will be there – a new record for the event. If you’re looking for things […]
What a difference a few weeks make…. As this is our first column after the new year, it is quite interesting to observe how different the steel world looks at the end of January vs. the end of December.
US hot-rolled coil (HRC) prices declined further this week, easing to their lowest level since late November. And while domestic tags remain notably more expensive than offshore product, the premium has declined as imported hot band tags have moved higher.
What's being talked about in the US steel market this week?
Domestic sheet prices slipped again this week, marking the first week of consecutive declines for hot-rolled (HR) coil since September. SMU’s HR price now stands at $1,000 per short ton (st) on average, down $25/st from last week and down $45/st from the start of the year.
Metalformers remain positive about business prospects for the first quarter of 2024, boosted by reported growth in January.
This latest SMU steel market survey is a snapshot of a sheet market inflecting lower. A significant 43% of survey respondents said that the hot-rolled (HR) coil market has already peaked. Compare that to only 8% when we released our last steel market survey on Jan. 5.
The latest SMU market survey results are now available on our website to all premium members. After logging in at steelmarketupdate.com, visit the pricing and analysis tab and look under the “survey results” section for “latest survey results.” Historical survey results are also available under that selection. If you need help accessing the survey results, […]
The slipping lead times for flat-rolled steel were not just due to the holiday slowdown, it seems, as production times for four out of five products contracted again this week.
US hot-rolled coil (HRC) prices edged down this week while import prices moved higher on average. Domestic hot bands’ premium over cheaper imports declined as a result. But overall, US product remains substantially more expensive than overseas material. All told, US HRC prices are 21.4% more expensive than imports, a premium that is down three […]
What are people in the steel marketplace talking about this week?
There seems to be a growing consensus that the US sheet market has peaked at a high level and could begin losing ground from here. Whether declines happen quickly or whether sheet prices bop around at current levels for a few weeks more is the primary question.
US service center flat-rolled steel inventories surged in December with the seasonal slowdown in shipments. At the end of December, service centers carried 64.8 shipping days of supply, according to adjusted SMU data, up from 54 days in November.
US hot-rolled coil (HRC) prices were unchanged this week but remain significantly more expensive than offshore product. While imported hot band tags increased vs. last week, gains were marginal, keeping domestic HRC substantially more expensive than imports. All told, US HRC prices are 24.3% more expensive than imports, a premium that is down only slightly […]
Steel prices continued to move higher last month on the back of repeated mill price increases after tags reached a 2023 low of $645 per ton in late September. Hot-rolled coil (HRC) prices ended December at an average of $1,035 per ton ($51.75 per cwt), rising by $112 per ton during the month.
I’d have been surprised if anyone told me just last week that the January scrap market might move lower. What we saw on Friday were offers. Not settlements. And no doubt there are still some twists and turns in store before we can say for sure which way scrap will go.
The latest SMU market survey results are now available on our website to all premium members. After logging in at steelmarketupdate.com, visit the pricing and analysis tab and look under the “survey results” section for “latest survey results.” Historical survey results are also available under that selection. If you need help accessing the survey results, […]
SMU polled steel buyers on a variety of subjects this past week, including purchasing practices, steel sheet prices, scrap, and the future market.
Cleveland-Cliffs didn’t wait long to roll out the first price increase of the year - $1,150 per short ton (st) for hot-rolled coil. That’s up $50 per ton from the steelmaker’s last published price. Will anyone follow? I’ve heard some mills are meeting this week but that any announcement might not come until next week. We'll see.
Steel mill lead times pulled back across the board this week but are still said to be at healthy levels, according to SMU's market survey this week.
US hot-rolled coil (HRC) prices moved up again this week and remain significantly more expensive than offshore product.
Sheet prices were mixed in SMU’s first assessment of the market in the New Year.
Steel Market Update’s Steel Demand Index declined, falling back into contraction territory after a very short-lived gain just two weeks ago, according to our latest survey data.
We started 2023 with HRC spot pricing around $700 per ton and the third-month future (March ‘23) trading at $800/ton. That same future eventually settled at $1,059/ton - a $259/ton swing. Today, spot pricing is just shy of $1,100/ton for HRC, and the third-month future (March ‘24) settled at $1,091/ton. The clear takeaway: a lot can change over three months. And while future contracts are a valuable tool for hedging, they are a terrible predictor of price.
US hot-rolled coil (HRC) prices might have plateaued. But while prices for offshore product have increased in some regions, imports remain significantly cheaper that domestic material. All told, US prices are roughly 26% more expensive than imports, a premium that is down only slightly from last week.
The latest SMU market survey results are now available on our website to all premium members. After logging in at steelmarketupdate.com, visit the pricing and analysis tab and look under the “survey results” section for “latest survey results.” Historical survey results are also available under that selection. If you need help accessing the survey results, or if […]
Steel buying lead times remain mixed as we head into the last week of 2023, according to SMU's most recent survey data.
On Monday and Tuesday of this week, SMU polled steel buyers on a variety of subjects, including purchasing practices, steel sheet prices, scrap, and the future market. Rather than summarizing the comments we received, we are sharing some of them in each buyer’s own words.