Flat rolled steel prices dropped this week based on our analysis of the market. Benchmark hot rolled coil dropped $5 per ton and is now averaging $800 per ton ($40.00/cwt). We saw even larger negative price movements in cold rolled, galvanized and Galvalume steels. Plate prices, however, were flat and the expectation of plate steel […]
This evening’s price and price momentum discussion comes after a number of conversations held with flat rolled steel service center CEO’s and a trading company executive on Thursday and Friday of last week. The words “mud” and “murky” were prominent as the steel distributors try to figure out where things are headed as we enter […]
This evening’s price and price momentum discussion comes after a number of conversations held with flat rolled steel service center CEO’s and a trading company executive on Thursday and Friday of last week. The words “mud” and “murky” were prominent as the steel distributors try to figure out where things are headed as we enter […]
Lead times for Galvalume and plate products shortened up a bit in the past two weeks, but otherwise lead times for flat rolled products have seen little change in October or November, despite the price hike announcements by the major mills. Lead times for steel delivery are a measure of demand at the mill level—the […]
Class 8 truck orders rose in October, reaching 43,000 units for the 10th best month ever. Orders were up 2 percent from September and 19 percent from a year ago. Robust freight volumes have kept truck capacity utilization tight, driving stronger build rates for new vehicles. “October is traditionally the start of the next year’s […]
Flat rolled steel prices continue to vacillate as we saw the low end of our range on benchmark hot rolled coil improve by $20 per ton. We are aware of a couple end-of-the-year deals that are below our range, but we feel at this point they are limited and not available to the greater market. […]
U.S. steel imports for October are likely to fall just below 3 million tons when the Census data is final, based on license data from the Department of Commerce. The total is roughly in line with the 12-month moving average for imports, but up more than 30 percent from September. Imports of semi-finished steel, mostly […]
The following calculation is used by Steel Market Update to identify the theoretical spread between foreign hot rolled steel import prices (delivered to USA ports) and domestic hot rolled coil prices (FOB domestic mills). We want our readers to be aware that this is only a “theoretical” calculation as freight costs, trader margin and other […]
Metals distributor Ryerson Holding Corp. reported a revenue gain of 44.6 percent year-over-year to $1.25 billion for the third quarter of 2018. Revenue was up 18.2 percent compared to the second quarter, driven by an increased average selling price and higher volume shipped. Net income attributable to Ryerson Holding Corp. was $77.5 million for the […]
Manufacturing activity continues to be strong, according to the latest ISM Report on Business, although slowing its pace of growth as it enters the fourth quarter. The October PMI declined 2.1 percentage points from September to register 57.7 percent. Most of the components of the PMI are trending at a slower rate. The new orders […]
Metalforming companies are expecting business conditions to slow slightly during the next three months as new orders decline, according to the October 2018 Precision Metalforming Association survey. Average daily shipping levels also decreased in October with 23 percent of firms forecasting a decrease in orders compared to 15 percent last month. Only 2 percent of […]
Flat rolled steel prices have stalled, despite the increase announcements out of many of the domestic steel mills. Plate steel spot prices, on the other hand, continue to remain firm in December with an expectation of a $40 price increase being collected in January. Steel Market Update canvassed the flat rolled and plate steel buyers […]
Flat rolled steel prices have stalled, despite the increase announcements out of many of the domestic steel mills. Plate steel spot prices, on the other hand, continue to remain firm in December with an expectation of a $40 price increase being collected in January. Steel Market Update canvassed the flat rolled and plate steel buyers […]
The price increase on flat rolled seems to have “fizzled out,” according to many of the steel buyers Steel Market Update spoke with over the past two days. A number of mills have sweetened their end-of-the-year deals in order to finish out their 2018 order book. This is not unusual during a normal fourth quarter, […]
Reliance Steel & Aluminum reported its second highest quarterly net sales in the company’s history. Third-quarter net sales jumped 21.4 percent year-over-year to $2.97 billion, down just 0.5 percent from the record set in the second quarter at $2.99 billion. Reliance net income for the quarter of $148.2 million was impacted by a $36.8 million […]
Flat rolled steel buyers are advising Steel Market Update that lead times have extended about one week since the recent price announcements. The mills continue to ask about their competition and to negotiate, which is not a sure-fire sign of strength or conviction in the new increases. Plate is a different animal and continues to […]
SSAB Americas and Nucor both announced a $40 per ton increase in the price of plate products this week. SSAB Americas informed customers on Monday, Oct. 22, that it is increasing transaction prices on plate products by a minimum of $40 per ton, effective immediately for all non-contract orders acknowledged for shipment the week of […]
The Nucor Plate Group announced today, Oct. 23, that it is raising transaction prices on carbon and alloy plate and heat-treated plate by $40 per ton ($2.00/cwt). The increase takes effect immediately on all new orders promised on or after Jan. 1, 2019. All published extras will be applied. Nucor’s last price hike on plate […]
For the past two weeks, Steel Market Update has been collecting data from the flat rolled and plate steel service centers in the United States who participate in our Service Center Inventories Index. The number of months of supply of flat rolled steel being held on the distributors’ floors increased to 2.8 months. Plate inventories […]
Twice per month, Steel Market Update conducts a detailed analysis of the flat rolled and plate steel markets through an online questionnaire. We invite 640 individuals to provide their opinions about the flat rolled and plate markets, what are the driving factors behind pricing, lead times, and mill negotiations, as well as how they feel […]
Twice per month, Steel Market Update conducts a detailed analysis of the flat rolled and plate steel markets through an online questionnaire. We invite 640 individuals to provide their opinions about the flat rolled and plate markets, what are the driving factors behind pricing, lead times, and mill negotiations, as well as how they feel […]
The following calculation is used by Steel Market Update to identify the theoretical spread between foreign hot rolled steel import prices (delivered to USA ports) and domestic hot rolled coil prices (FOB domestic mills). We want our readers to be aware that this is only a “theoretical” calculation as freight costs, trader margin and other […]
Lead times for most flat rolled steel products ticked up slightly this month, according to returns from Steel Market Update’s latest market trends questionnaire. Could this signal the end of the downtrend? This is an important question considering the domestic steel mills announced price increases just last week. Lead times for steel delivery are a […]
I had an interesting conversation with James (Jim) Banker, Jr., who is the Executive Vice President of NLMK USA late this afternoon. We discussed a couple of topics. One I described in an earlier article about their Allegheny Technologies Inc. slab tolling arrangement announced this morning. The second topic was about why NLMK USA has […]
They may be off the table as of today, but late last week (and some buyers reported some still existing early this week) there were special deals – many tied to large tonnage – as the domestic mills attempted to fill their hot rolled order books. We did have a number of buyers and a […]
With the market sending mixed signals, distributors of HVAC products are keeping inventories lean as they wait to see if the price increase just announced by the steel mills gains any traction. “You can make a case for prices to go either way,” said one member of the Heating, Air-conditioning and Refrigeration Distributors International (HARDI) […]
It is always a struggle to find the proper footing after the domestic mills make a price announcement that, on its face, appears to be a way of stopping the sub-$800 offers and put a floor (however temporary) to the market. To me, it is quite telling when one or two mills that normally follow […]
Yesterday, Nucor announced a $40 per ton ($2.00/cwt) price increase on all flat rolled products they produce. The increase was to take effect immediately on all “spot” orders. On paper, the increase announcement does not impact contract pricing. However, steel buyers are advising Steel Market Update that the reason behind the Nucor announcement was two-fold: […]
The market has been searching for a bottom and perhaps found it this week as all the major flat rolled mills announced price hikes of $40 per ton on hot rolled, hot rolled P&O, cold rolled and galvanized steel products. Steel prices have seen a steady decline of around $80 per ton since this summer. […]
We saw mixed results in the flat rolled markets this week. Benchmark hot rolled dropped $5 per ton compared to one week ago. Cold rolled was modestly higher ($5/ton), while galvanized and Galvalume were down $15 per ton. Plate prices remained intact with no change compared to one week ago. Here is how we see […]