Preliminary Census data shows that total foreign steel imports rose 14% from March to April, up to 2.64 million tons, as U.S. buyers sought relief from climbing domestic prices and limited supplies. This is the highest total monthly import level seen since July 2020 when imports were 2.71 million tons. Import licenses currently for May are at 2.52 million tons, down 4% from […]
New orders, production and employment picked up in May despite slower supplier deliveries and lengthening backlogs, said the Institute for Supply Management in the May 2021 Manufacturing ISM Report on Business. The Manufacturing PMI rose 0.5 percentage point to 61.2 after contracting in April and indicates expansion for the overall economy. “Manufacturing performed well for the […]
The U.S. steel industry stands to benefit in a big way should the government put a price on carbon emissions, according to a study by CRU, Steel Market Update’s parent company. CRU examined the potential impact of a standard fee on carbon emissions and an equivalent border carbon adjustment (BCA) and found that such policies could […]
The United States leads the world in production of sustainable steel and doesn’t get enough credit for its performance in reducing climate-changing CO2 emissions, said Steel Manufacturers Association President Philip Bell, during during Wednesday’s SMU Community Chat webinar. The minimill electric arc furnace is the preferred technology for lowering CO2 intensity. “The U.S produces over 70% […]
New home sales sank 5.9% in April from downward revised data in March to a seasonally adjusted annual rate of 863,000, according to estimates by the U.S. Census Bureau and Dept. of Housing and Urban Development. Other than a weather-related dip in February, April’s annual rate was the lowest since June 2020. A new home […]
Some foreign steel imports are slowly losing their price advantage over domestic steel, according to Steel Market Update’s latest foreign versus domestic hot rolled steel price comparison. The price differentials between domestic HRC compared to foreign imports had surged through February and March to reach record highs in favor of foreign producers. Those spreads have […]
Steel Market Update surveys readers each week to monitor market sentiment. The prevailing view on key issues this week: record high steel prices still have room to run; the high prices have not cut into demand yet; repealing Section 232 on imports from the EU is a questionable move; and inflation poses a threat to […]
Steel Market Update surveys readers each week to monitor market sentiment. The prevailing view on key issues this week: record high steel prices still have room to run; the high prices have not cut into demand yet; repealing Section 232 on imports from the EU is a questionable move; and inflation poses a threat to […]
March apparent steel supply rose nearly 1.5 million tons from February’s dip, now at 8.96 million net tons, according to the latest U.S. Department of Commerce and American Iron and Steel Institute data. This is the highest supply level seen since January 2020’s 9.52 million tons. March also marks the largest month-over-month increase in supply […]
A coalition of U.S. steel industry lobbying groups and the United Steelworkers (USW) union want the Biden administration to keep Trump-era Section 232 tariffs and quotas on imported steel in place. The groups say the tariffs – rolled out in March 2018 on national security grounds – are necessary for the survival of the domestic […]
“We are focused on availability more than price.” This morning Steel Market Update participated in a very subdued galvanized steel conference call with members of the Heating, Air-conditioning, Refrigeration, Distributors International trade group. HARDI members are wholesalers who supply the mechanical contractors doing work on residential and commercial construction jobs. The key takeaway I got […]
“We are focused on availability more than price.” This morning Steel Market Update participated in a very subdued galvanized steel conference call with members of the Heating, Air-conditioning, Refrigeration, Distributors International trade group. HARDI members are wholesalers who supply the mechanical contractors doing work on residential and commercial construction jobs. The key takeaway I got […]
The United States and the European Union have begun negotiations that could lead to the removal of Section 232 tariffs on steel and aluminum imported from the continent, according to market participants and a joint statement from the two sides. The official trigger of the talks: U.S. Trade Representative Katherine Tai, Commerce Secretary Gina Raimondo […]
Flat Rolled = 41.8 Shipping Days of Supply Plate = 42.8 Shipping Days of Supply Flat Rolled U.S. service center flat rolled inventories remain low, though steel mills are starting to catch up on delayed orders. Service centers carried 41.8 shipping days of supply at the end of April, flat compared to March’s adjusted inventory […]
Will the Section 232 tariffs be modified in some way in the near future? That is what U.S. Trade Representative Katherine Tai appeared to suggest during testimony before the Senate Finance Committee on Wednesday. Tai told the committee that the Biden administration seeks a better tool for addressing trade than the 1962 Trade Expansion Act. […]
Mill shipments of steel products improved by 18.3% in March compared to the month prior, while apparent supply increased by 18.1% during the same period. The double-digit gains are even more impressive considering their low performance in February, the first decline in both apparent supply and shipments of steel since the market reached bottom back in […]
This report examines the import share of sheet and plate products. Imports’ share of total sheet product shipments was 12.7% in March, down from 14.0% in February. The decrease corresponds to a simultaneous increase in domestic shipments and a rise in imports; however, the surge in domestic shipments at 17.4% month on month outpaced the […]
This report examines the import share of tubular and long products shipments. Imports’ share of total tubular products rose to 46.2% in March, up from 44.6% in February. Despite a 30.7% surge in domestic tubular shipments month on month, imports were even stronger at 39.3% in March compared to February. Tubular imports fell consecutively in […]
Could the U.S. steel industry be looking at 50 million tons of new demand in the next few years? That’s one way of calculating how much steel might be required if a $1-trillion infrastructure package passes Congress and is signed into law. Infrastructure spending of $1 billion equals 50,000 tons in steel demand, according to a […]
Could the U.S. steel industry be looking at 50 million tons of new demand in the next few years? That’s one way of calculating how much steel might be required if a $1-trillion infrastructure package passes Congress and is signed into law. Infrastructure spending of $1 billion equals 50,000 tons in steel demand, according to a […]
Pressure is building on the Biden administration to provide relief for numerous manufacturing companies in the U.S. that say Section 232 tariffs are making supply chain problems worse. The Coalition of American Metal Manufacturers and Users, the National Foreign Trade Council and other steel and aluminum users collaborated on a May 6 letter to President […]
Olympic Steel kept the momentum going at the start of 2021, achieving its most profitable first quarter ever and third best quarter overall in the company’s history. Despite supply/demand challenges, Olympic recorded record net sales of $463 million due to higher metals pricing. Net income was $22 million, a big improvement from $600,000 in Q1 […]
Final Census data shows that finished steel imports rose 24% from February to March, as more U.S. buyers sought relief from climbing domestic prices and limited supplies. March finished imports were just shy of 1.80 million tons, the highest level seen since August 2019. April finished steel import licenses are currently down 6% from March […]
Limited supply and strong demand continued to push steel prices higher throughout April, now the eighth consecutive month in which prices have increased. Hot rolled steel prices increased an average of $25 per ton each week, reaching $1,440 per ton by the end of April, exceeding any historical price by far. The SMU Price Momentum […]
I wish I could start off writing about something other than steel prices. That said, since I joined SMU from Fastmarkets AMM in early January, the news really has been the price. SMU’s average hot-rolled price on Tuesday, May 4, stood at $1,500 per ton ($75 per cwt). That’s a 12.8% increase from $1,330 per ton a month ago […]
The ISM Manufacturing Report on Business came in lower than expected in April. The PMI dipped four points to a reading of 60.7% as both the new orders and production indexes edged downward to 64.3% and 62.5%, respectively. A score above 50, however, indicates expansion, which means demand continued to improve in April. Fabricated metal […]
U.S. Steel has commenced a 25-day maintenance outage at the No. 1 blast furnace at its Mon Valley Works in western Pennsylvania. Steel Market Update has updated its blast furnace status chart to reflect the development. The Pittsburgh-based steelmaker said on its first quarter earnings call on Friday, April 30, that it had begun the […]
In a surprise announcement, U.S. Steel said it is canceling the endless casting and cogeneration project at Mon Valley Works. The company has already spent $170 million on the $1.3 billion project. “This is not the end of Mon Valley,” President and CEO David Burritt emphasized during the first quarter earnings call on Friday. The […]
By CRU Analyst George Pearson from CRU’s Steel Monitor Chinese prices have rebounded this week after three consecutive weeks of decline. However, trading in markets outside of China was lower last week as buyers waited for further developments in Chinese prices and this fed through to lower w/w gains in Europe and the U.S. U.S. […]
By CRU Chief Economist Jumana Saleheen and CRU Head of Fertilizers Chris Lawson, from CRU’s Steel Monitor Commodity prices have continued an upwards tear in 2021. Steel and its raw materials have seen the sharpest gains, but less well-known commodities such as fertilizers are also attracting attention. With such steep price rises, calls for a […]