Steel Market Update’s price range for plate products raised a few eyebrows this week. Allow me to point out a few facts about SMU pricing data. SMU provides a weekly range as reference points for you to review. The reference points come from steel buyers and from steel mills. However, we place the most emphasis on […]
By CRU Principal Analyst Josh Spoores, from CRU’s Steel Sheet Products Monitor, Nov. 10 Global sheet prices have continued to fall, though declines have not been consistent across all regions. Overall, CRU’s Global Flat Products Steel Price Indicator (CRUspi flats) fell for the second consecutive month, declining by 2.9% and is now at its lowest […]
Even as domestic prices ease, foreign steel imports continue to tempt U.S. buyers with potential discounts of 24-43%, according to Steel Market Update’s latest comparison of domestic and foreign hot rolled steel prices. Foreign hot rolled steel prices are now theoretically $452-801 per ton cheaper than domestic steel, after taking freight costs, trader margins and tariffs […]
Steel buyers are “confused” as are some traders as to what deals are being offered into the hot rolled market right now. Steel Market Update has been advised by a couple of large HRC buyers of offers below $1,600 per ton ($80.00/cwt), while at the same time we have spoken to buyers who continue to […]
Steel buyers are “confused” as are some traders as to what deals are being offered into the hot rolled market right now. Steel Market Update has been advised by a couple of large HRC buyers of offers below $1,600 per ton ($80.00/cwt), while at the same time we have spoken to buyers who continue to […]
Steel Market Update’s check of the market this week shows both flat rolled and plate prices declining by another $10-25 per ton. The declines were not unexpected and are in line with the downtrend that has materialized in the last two months as seasonal dips in demand and competition from imports put pressure on domestic […]
Ferrous scrap prices saw an unexpectedly big jump in November, with shredded scrap selling as high as $75/GT above October levels. Prime scrap rose $20/GT, sources tell Steel Market Update. Observers were expecting higher prices in November on strong export demand and some seasonal tightening of supplies, but were surprised by the size of the […]
The House has finally passed a bipartisan infrastructure bill after months of wrangling not only among Republicans and Democrats but also among factions within the Democratic party. “American steel built this country, and the industry is now ready to get to work on rebuilding this country. Repairing and modernizing our national transportation system is essential […]
By Trade Attorney Lewis Leibowitz I summarized the newly announced trade deals between the United States and the European Union last week. I use the plural because a lot of issues were addressed in the statements that followed. Today’s column evaluates a few of the trends that are visible from these statements – notably on […]
South Korea is pushing for “swift consultations” with U.S. trade officials about Section 232 following the negotiation of a tariff-rate quota (TRQ) with the European Union, according to local media reports. Seoul is concerned that the deal with the EU – which will allow approximately 3.6 million short tons of steel into the U.S. duty […]
Mill executives have been front and center over the past couple weeks during their earnings calls and the annual gathering of AISI and SMA members in Washington. Below is a sampling of some of their more notable remarks: • Just because the U.S. and EU managed to negotiate a quota to replace the controversial Section […]
Final Census data shows that September foreign steel imports increased 17% from August to 3.26 million net tons and a 28-month high. October import licenses are currently at 2.47 million tons as of Nov. 4, down 24% from September and down 11% compared to August. The last time total monthly import levels were this high was April […]
Japan wants a waiver from the current Section 232 regime following the U.S. negotiating a tariff-rate quota (TRQ) with the European Union. The issue came up during a virtual meeting between U.S. Trade Representative Katherine Tai and Koichi Hagiuda, head of Japan’s Ministry of Economy, Trade and Industry, on Thursday, Nov. 4. Minister Hagiuda “strongly […]
By CRU Principal Analyst Josh Spoores Trade representatives from the USA and Europe came to an agreement at the end of October in regard to the Section 232 tariffs on steel and aluminum. The Department of Commerce further announced on Oct. 31 that consultations regarding the trade of steel remain ongoing between the USA and […]
U.S. mill CEOs generally praised the tariff rate quota (TRQ) agreement reached with the EU. But they stressed that enforcement would be key to its success. The United Kingdom, Japan and countries that have hard quotas – such as South Korea – are places that come to mind when one thinks of where a deal might […]
Speaking at a steel industry gathering just two days after unveiling the historic trade deal she helped negotiate with the European Union, U.S. Trade Representative Katherine Tai described the progress made in steel trade and the challenges that still lie ahead in curbing global steel overcapacity. Following are her remarks today at the General Meeting […]
The tariff-rate quota, or TRQ, replacing Section 232 tariffs on steel and aluminum imported from the European Union will go into effect on Jan. 1, 2022, per details of the agreement released by the Office of the United States Trade Representative (USTR). A 25% tariff will be still applied after the quota limit – 3.3 million […]
October saw a gradual decline in steel prices for the second consecutive month, following one full year of continuous price increases. Hot rolled steel prices decreased $45 per ton throughout the month, with the SMU index averaging $1,885 per ton ($94.25 per cwt) as of Tuesday, Oct. 26. The SMU Price Momentum Indicator for hot […]
By CRU Senior Analyst Ryan McKinley from CRU’s Steel Sheet Products Monitor Falling demand in most markets around the world has continued to weigh on steel sheet prices. Meanwhile, the announcement that the USA will remove Section 232 tariffs on steel and aluminum producers in the EU and replace them with a quota system means […]
The deal just announced between the U.S. and EU to replace the Section 232 tariffs with a tariff rate quota and to cooperate in reducing climate-changing carbon emissions was seen as a breakthrough by many – but not all. Trade groups representing steel consumers and producers from other parts of the world expressed “disappointment” that the […]
By Trade Attorney Lewis Leibowitz At the last minute, the U.S. and EU announced a deal to keep the tariff wars from getting worse. Yesterday, at the G20 meeting in Rome, the two sides announced an agreement that will prevent major retaliatory tariffs on U.S. exports to Europe from going into effect on Dec. 1. […]
The U.S. and European Union (EU) announced a deal this weekend that removes Section 232 tariffs on imports from the EU and replaces them with a tariff rate quota (TRQ) system. The agreement ends a dispute dating back to 2018 when President Trump imposed Section 232 tariffs on steel and aluminum imports, and it heads […]
The U.S. and the European Union (EU) could reach a deal that would lead to the removal Section 232 tariffs from steel imports from the trade bloc as soon as this weekend, according to sources familiar with the matter. The two sides would most likely agree to a tariff rate quota, or TRQ, which would replace […]
“Business is great! Why is Steel Market Update always spreading so much gloom and doom about falling steel prices?” That’s not an actual quote, but we hear comments to that effect nearly every week. As if folks believe it will be a self-fulfilling prophecy. Of course, if prices decline, it won’t be because of some […]
Editor’s note: SMU Contributor David Feldstein is president of Rock Trading Advisors. Rock provides customers attached to the steel industry with commodity price risk management services and market intelligence. RTA is registered with the National Futures Association as a Commodity Trade Advisor. David has over 20 years of professional trading experience and has been active […]
Even as domestic hot rolled steel prices fall below $1,900 per ton, cheaper foreign steel imports continue to tempt U.S. buyers with potential discounts of 25-43%, according to Steel Market Update’s latest foreign versus domestic hot rolled steel price comparison. Foreign hot rolled steel prices are now theoretically $478-803 per ton cheaper than domestic steel, […]
Steel imports into the United States jumped by nearly 35% in the first nine months of this year, versus the same period in 2020, according to Census Bureau data from the American Iron and Steel Institute (AISI). Tight supplies and record-high domestic steel prices have attracted a host of imports, which are reportedly some $400-800 […]
Hot rolled steel prices have declined for the fifth time in the last seven weeks to an average of $1,885 per ton, according to Steel Market Update’s check of the market on Monday and Tuesday. That’s down $70 per ton from the high reached in the first week of September. Price momentum for HR is […]
Distributors who sell galvanized steel products to the construction and HVAC sectors report a slight softening in demand at the same time that competition is firming up and prices are looking down. Market conditions overall are still favorable, reported members of the Heating, Air-Conditioning & Refrigeration Distributors International during HARDI’s monthly conference call today, but […]
(Editor’s note: The following commentary was submitted by Flack Global Metals Founder and CEO Jeremy Flack.) Looking to improve vendor relations during contract negotiations? Look no further than the forward curve. Contract season is underway, and we hear things are choppy out there. The mills are serving up a mixture of higher extras and lower […]