Total US mill shipments of steel products increased in January, recovering from a 23-month low the month prior. January’s shipments were the highest since last August and totaled 7.63 million tons, a 6.5% increase from December’s 7.17 million tons. Apparent supply also saw a month-on-month (MoM) increase in January, up 7.9% vs. the prior month. This analysis […]
Flat Rolled = 52.2 Shipping Days of Supply Plate = 45 Shipping Days of Supply Flat Rolled US service center flat-rolled steel supply in February edged down slightly, while the amount of material on order surged. At the end of February, service centers carried 52.2 shipping days of supply, according to adjusted SMU data. This […]
What’s perhaps most shocking about Cleveland-Cliffs starting the week up $100 per ton ($5 per cwt) on sheet and targeting $1,200 per ton for hot-rolled coil (HRC) is that many of you didn’t find it shocking. In early February, we got used to prices going up by $50 per ton from one week to the […]
Flat-rolled steel prices continue to rise in response to repeated mill pricing announcements, a trend we’ve seen nearly weekly since Monday, Nov. 28, 2022. Hot-rolled coil (HRC) prices have surged by $490 per ton – a 78% jump – since Cleveland-Cliffs and US Steel kicked off the craze with $60-per-ton price hikes. On Monday, Cliffs […]
Cleveland-Cliffs aims to increase spot market prices for hot-rolled, cold-rolled, and coated flat-rolled steel by at least $100 per ton ($5 per cwt) effective immediately. The Cleveland-based steelmaker also said its new minimum base price for hot-rolled coil (HRC) was $1,200 per ton in a press released on Monday, March 13. That’s up from the […]
US plate prices have steadily increased over the past two weeks, largely in response to repeated mill price hikes. The most recent increase came from Cleveland-Cliffs when the steelmaker aimed to increase base prices for steel plate by at least $60 per ton ($3 per cwt). It was Cliffs’ first official plate price notice in […]
The price advantage domestic hot-rolled coil (HRC) had enjoyed over offshore hot band has evaporated as US mills drive prices higher, according to Steel Market Update’s latest foreign vs. domestic price analysis. Nucor and ArcelorMittal last week announced a target price $1,150 per ton ($57.50 per cwt) for HRC. Market contacts have told SMU that some […]
JSW Steel USA said it is the first steel company in the US to adopt Environmental Product Declarations (EPDs). The steelmaker said that with new technology, called “Smart EPD,” it can directly generate and publish verified digital EPDs on demand. Developed by sustainability consultancy TrueNorth Collective, JSW USA said the Smart EPD platform is based on […]
We’ve just seen the biggest week-over-week increase in hot-rolled coil prices since the frenzy following Russia’s invasion of Ukraine last year. SMU’s hot-rolled coil (HRC) price is up $140 per ton ($7 per cwt) week over week. That’s our biggest such gain since prices jumped $210 per ton in mid-March of last year at the height of […]
Aggressive mill price increases are pushing flat-rolled tags up at a sharp clip, rivaling the spike seen in response to the war in Ukraine last March. On Friday, Nucor came out with yet another notice – up an extra $150 per ton ($7.50 per cwt) and setting a new base price for hot band of […]
ArcelorMittal said its new, minimum base price for US hot-rolled coil is $1,150 per ton ($57.50 per cwt). The Luxembourg-based steelmaker said the move was effective immediately and coincided with the closure of its April order book for hot-rolled and tandem products. “The increase is applicable to all new spot orders and all recent quotations […]
Mexico has historically relied on steel sheet product imports to meet its demand as domestic suppliers, such as Ternium and AHMSA, had insufficient production capacity. But, in recent years, both Ternium and ArcelorMittal have built new capacities for hot-rolled (HR) coil in Mexico. Ternium is also in the process of building more downstream capacity and […]
Nucor aims to increase base prices for new orders of steel sheet by at least $150 per ton ($7.50 per cwt) effective immediately. The Charlotte, N.C.-based steelmaker also said that its new base price for hot-rolled coil was $1,150 per ton. “We reserve the right to review and re-quote any offers that are not confirmed […]
A majority of shares in Mexican steelmaker Altos Hornos de México (AHMSA) has been sold to a group of foreign investors, according to reports in the Mexican press. Shareholders of Grupo Acerero del Norte signed an agreement to transfer the majority of AHMSA shares to the group of foreign investors, an article in Milenio said on […]
Domestic hot-rolled coil (HRC) continues to lose its price advantage over imported steel. The reason: US prices continued to move higher following a wave of domestic mill price hikes that began after Thanksgiving and reached a fever pitch in February with near weekly price increases. US HRC had held a price advantage over foreign hot […]
Cleveland-Cliffs Inc. aims to increase base prices for steel plate by at least $60 per ton ($3 per cwt). The Cleveland-based steelmaker said the move was effective immediately on all new, non-contract orders. It applies equally to as-rolled, normalized, and quenched-and-tempered material, Cliffs said in a press release on Thursday, March 2. “Cliffs also reserves […]
February came in with a bang and went out with one too. We saw two rounds of $50-per-ton sheet price increases early in the month. Then one of $100 per ton. And finally Cleveland-Cliffs came in near the buzzer on Monday with another $100-per-ton price hike. We think that was the last shot of the […]
Last week’s mill price increases continue to make their way into the market. Cliffs’ latest this week – up another $100 per ton ($5 per cwt) and setting a new base price for hot band of $1,100 per ton – has yet to be reflected in today’s pricing. But that hasn’t stopped it from garnering […]
The Biden administration has hit Russian pig iron as well as other steel and metal products with tariffs of up to 70%. The move was made with less fanfare than the 200% tariffs on Russian aluminum announced in a presidential proclamation last week. The tariffs were included in an annex attached to that proclamation. The […]
Cleveland-Cliffs aims to push its hot-rolled coil price up by at least another $100 per ton ($5 per cwt) in its fourth sheet price hike this month. Cliffs made the announcement in a press release on Monday, Feb. 27, just six days after announcing another $100-per-ton increase. Cliffs said its new target base price for hot […]
US plate prices have remained mostly flat this week, a trend we’ve seen since Nucor announced a plate price cut in late November. Recall that in late November, Nucor said it would be lowering plate prices by $140 per ton ($7 per cwt) with the opening of its January order book. Plate tags have varied […]
Domestic hot-rolled coil (HRC) lost its competitive price advantage over imported steel, ending a 16-week run. The turn came as domestic mills continue to drive prices up at a faster clip than mills overseas, according to Steel Market Update’s latest foreign vs. domestic price analysis. US HRC is approximately 3% more expensive than foreign prices […]
Canadian flat-rolled steelmaker Stelco Holdings Inc. recorded sharply lower fourth-quarter profits. The culprit: the “triple whammy” of declining steel prices, shorter lead times, and higher costs, company chairman and CEO Alan Kestenbaum said. “Now, however, we are seeing a reversal of all of these factors with rising steel prices … lengthening lead times, and input […]
Imported sheet and plate products’ arrival at US ports declined in December, leading their share of the US markets to edge lower, while domestic shipments gained ground during the month. That’s according to a Steel Market Update analysis of import data from the US Commerce Department and domestic shipment figures from the American Iron and […]
NLMK USA has announced new, higher base prices for steel sheet. The steelmaker said the higher prices were effectively immediately on all new spot orders and justified by “strong demand and extending lead times,” in a letter to customers on Wednesday, Feb. 22. NLMK USA said that its new minimum base price for hot-rolled coil was […]
Total US mill shipments of steel products declined in December, easing for the second straight month after fluctuating up and down for much of the year. December was the lowest mill shipment total for 2022, falling to the lowest total since February 2021. Shipments totaled 7.27 million tons in December, a 1% decrease from November’s 7.34 […]
Sheet prices are up again. By a lot. For the third time this month. And it’s not over yet! Nucor alone is up more since Thanksgiving ($310/per ton) than they were after the invasion of Ukraine ($275/ton), according to our price increase calendar. We had obvious drivers for the last two big rallies. The snapback […]
Sheet prices increased this week as another blitz of price hikes – this time $100 per ton ($5/cwt) – spurred the market higher. The latest announcements from the likes of Nucor, Cliffs, US Steel, and ArcelorMittal, all setting a new base price for hot band of $1,000 per ton, are yet to be reflected in […]
ArcelorMittal has followed three major domestic mills in increasing sheet prices by at least $100 per ton ($5 per cwt). Luxembourg-based ArcelorMittal, one of the world’s largest steelmakers, also said it was targeting a minimum base price of $1,000 per ton for hot-rolled coil (HRC) effective immediately. That echoes new HRC base prices announced earlier […]
US Steel has joined competitors Nucor and Cleveland-Cliffs in raising base prices for steel sheet by at least $100 per ton ($5 per cwt). The Pittsburgh-based steelmaker said the price hike was effective immediately for all new spot orders in a letter to top sales staff dated Tuesday, Feb. 21. The company said the increases […]