Tag: Hot-Rolled Coil

Sheet prices notched a third consecutive week of gains on limited supply and stable demand outside of automotive operations impacted by the UAW strike.

Steel Market Update’s Steel Demand Index remains in contraction territory despite repeated improvements since mid-September, according to our latest survey data.

SMU’s latest survey data are out, and they reflect a consensus among steel buyers that sheet prices have bottomed out and might rebound. Lead times continue to extend. Fewer sheet and plate mills are willing to negotiate lower spot prices. And 70% of survey respondents think prices have already bottomed out or will later this […]

The spread between hot-rolled coil (HRC) and prime scrap prices widened slightly this month, according to SMU’s most recent pricing data.

The sheet market appears poised for a rebound if you’re looking at the indicators we typically track.

The mill negotiation rate for all products SMU looks at fell this week, with hot rolled dropping 13 percentage points, according to our most recent survey data.

US hot-rolled coil (HRC) and offshore product are nearly back even again after domestic prices moved higher for the second straight week.

This week’s survey showed steel mill lead times extending across all product lines tracked by SMU.

If the last few years have taught us anything, it is that nothing is certain.

Sheet prices remain on an upward trend. Many of you expect that to remain the case - assuming that the UAW strike doesn’t drag on much longer.

Sheet prices moved upward for the second week in a row despite the ongoing UAW strike and concerns in some corners that momentum from a price hike last month might be fading, market participants said.

A service center executive recently told me that the best way to make a fool of yourself was to try to predict what flat-rolled steel prices were going to do. He hadn’t expected that hot-rolled coil prices would rebound from less than $600 per ton ($30 per cwt) for some larger buyers to potentially more […]

A slowdown in US steel imports has yet to be seen, as total import licenses in September were about even with August’s import levels.

US hot-rolled coil (HRC) and offshore product are nearing parity again after domestic prices moved higher this week and imports declined again.

Did the price increase announced by Cleveland-Cliffs last week stick? Yes, at least partially.

Sheet prices rose this week on the heels of a price increase announced by Cleveland-Cliffs last week that was quietly followed by other mills.

Steel prices continued to decline last month – a trend we’ve seen repeated since mid-April.

Will the sheet price hike announced by Cleveland-Cliffs (and quietly followed by at least some mills) stick?

US plate prices have been relatively flat this year, especially when compared to sheet products. Case in point; SMU's plate prices stands at $1,455 per ton ($72.75 per cwt) on average, down 7% from a $1,560 per ton peak in April. Our HRC price is at $645 per ton, down 44% from an April peak of $1,160 per ton.

I didn’t see the Cleveland-Cliffs price increase coming on Wednesday. And I didn’t expect to see a target base price of $750 per ton ($37.50 per cwt) for hot-rolled coil. But I’ve since heard that other mills, even if they hadn’t publicly announced anything, had been quietly raising prices before Cliffs publicized its increase. Are […]

On Sept. 15, the UAW went on strike at three plants, one of each of the Big 3. On Sept. 22, the UAW expanded its strike to 38 more GM and Stellantis plants. Since Sept. 15, the HRC futures curve has rallied $60-75 in the November – February futures months. The reason why there has been this breakneck rally is because, uh, well, um. I have no idea. I am as shocked by it as perhaps you are, frankly.

While lead times for sheet again had mixed movements this week, those for plate collapsed, according to SMU’s most recent market survey.

The overall steel mill negotiation rate remained level this week vs. two weeks earlier, but plate’s rate fell by 15 percentage points, according to SMU’s most recent survey data.

US hot-rolled coil (HRC) prices were down again vs. offshore hot band this week. Domestic HRC lost more ground relative to imported product with US tags sinking at a faster rate than those overseas.

Cleveland-Cliffs is increasing its sheet tags, setting a new base price for hot-rolled coil, effective immediately, the company said in a press release on Wednesday, Sept. 27.

Hot-rolled coil prices were down again this week, continuing a streak of week-over-week (WoW) declines that began in early/mid-July.

The drop in imports continued for the second straight month, in line with license applications and falling lower year on year (YoY).

US hot-rolled coil (HRC) prices fell further relative to imported product this week. Domestic hot band remains cheaper than offshore HRC as US tags continue to sink at a sharper rate than those overseas.

Sheet prices fell again this week, this time not on fears of a United Auto Workers (UAW) union strike but on the actual thing.

Sheet prices slipped again this week on news of the United Auto Workers (UAW) strike and continued caution among some consumers.