Steel buyers and steel mill sellers are beginning to come to the same conclusion, the steel mills have the momentum and flat rolled steel prices are beginning to rise. What may be surprising steel buyers, especially those who do not read publications like Steel Market Update, is the pace and the strength of the market […]
On Monday, November 7, 2016 ArcelorMittal USA began advising their customers of their intention of raising steel base prices to specific minimum levels. The announcement came from an internal memo (or email from the various sales representatives of the mill) which stated, “Effective immediately, the following minimum base prices will be applicable to all new […]
The U.S. Department of Commerce (DOC) released Final Census Data on imports of foreign steel for the month of September 2016. Imports totaled 2,775,565 net tons which is 9.5 percent below the August import numbers. The U.S. continues to see strong imports of semi-finished steels (slabs/billets) which are used by the domestic steel mills. Hot […]
Flat rolled steel prices have begun their ascent as the $30 per ton price increase begins to be collected by the domestic steel mills. Both Platts and Steel Market Update have hot rolled prices moving up by $10 per ton this past week with SMU at $480 and Platts at $485 per ton by week’s […]
It does not feel like a “rocket” market. By that we mean we are seeing prices skyrocketing at a breakneck pace. Don’t get us wrong. Prices have indeed changed coarse and the Momentum is for prices to trend higher over the next month of two. We just need to be careful as different products and […]
Steel Market Update (SMU) is adjusting our Price Momentum Indicator to “Higher” from Neutral. It is our opinion that flat rolled steel prices in the United States and Canada will move higher over the next 30 to 60 days. There are a number of reasons why we have chosen to make this move now, here […]
Flat rolled steel prices are bottoming out and we are already seeing the potential for hot rolled being the first product to move higher. In the table below are the three steel indexes followed by Steel Market Update. Platts was the first index to report hot rolled prices as moving higher this past week. At […]
With all of the domestic steel mills announcing $30 per ton price increases either late last week or early this week, the industry is waiting to see if there was a surge of orders and how those orders have impacted lead times. Everyone knows if lead times begin to extend then buyers will have no […]
The flat rolled steel markets are in a state of confusion as both buyers and sellers of steel decide what is a fair price for hot rolled, cold rolled and coated steels based on existing market conditions both in the United States but also the rest of the world. Even though there have been price […]
On Friday morning US Steel became the first domestic steel producer to announce a flat rolled steel price increase. Later in the day Nucor and California Steel Industries (CSI) followed with similar announcements. SMU expects other steel mills to follow with announcements of their own as this new week gets underway. On October 21, 2016 […]
Flat rolled steel prices have broken through some key barriers over the past couple of weeks as benchmark hot rolled crashed through $500 per ton and cold rolled has now broken through $700 per ton. It was not just the Steel Market Update steel index average moving lower, we saw Platts take their steel index […]
We saw a single data point “bounce” this week in both the Current and Future SMU Steel Buyers Sentiment Indexes. Does it mean anything significant? In our opinion it is too early to tell. Current Sentiment, which measures how buyers and sellers of flat rolled steel feel about their company’s ability to be successful in […]
Steel Dynamics reported higher flat rolled prices resulted in an 11 percent increase in earnings in the third quarter. Net earnings were $284 million on net sales of $2.1 billion. Adjusted net income, including a $5 million litigation settlement charge, was $157 million for the quarter. SDI steel production was at 85 percent capacity in […]
Since Monday of this week Steel Market Update has been conducting a survey of the flat rolled steel market place. During the process SMU probes about a number of key topics of importance to buyers and sellers of flat rolled steel. One of the areas we deem to be very important is the status of […]
The domestic steel mills in North America continue to be willing to negotiate spot steel prices on hot rolled, cold rolled, galvanized and Galvalume products according to those responding to this week’s Steel Market Update flat rolled market trends survey. It has now been a number of months since the mills were last in a […]
Flat rolled steel prices were mixed this week with three of the four items moving lower and one (galvanized) remaining the same. The questions being asked by buyers – both at the service center and manufacturing level – is how much further do prices need to fall before bouncing back? The issue of “finding the […]
Flat rolled steel prices continue to move lower as benchmark hot rolled broke through $500 per ton and is now averaging $490 per ton. We were relatively conservative in our range this week as we did capture at least one order placed for moderate tonnage at $440 per ton and we are hearing that the […]
We believe that misinformation about regional import volumes is often used to influence purchase decisions. Our intent with this analysis of tonnage by district of entry is to describe in detail what is going on in a company’s immediate neighborhood and thus provide a negotiating advantage for our premium subscribers. We are now publishing monthly […]
Flat rolled steel prices continued their swoon this past week, according to the steel indexes followed by Steel Market Update. Benchmark hot rolled declined by $10 per ton ($.50/cwt) on our own HRC index average and $15 per ton ($.75/cwt) over at Platts. Both indexes have hot rolled averaging $500 per ton and the expectation […]
Licensed data for September was reported by the Steel Import Monitoring System of the US Commerce Department on October 4th. An explanation of the methodology that we at SMU use to analyze the trade data is given at the end of this piece. All volumes in this analysis are reported in short tons. Total rolled […]
Lead times continue to be at, or slightly below year ago levels. Steel Market Update conducted our flat rolled steel market trends analysis over the course of this week. As part of our questionnaire, submitted to almost 550 companies, we ask questions regarding lead times for new orders out of the domestic steel mills by […]
With the short lead times we reported earlier in this issue, the buyers and sellers of flat rolled steel are almost unanimously reporting the steel mills as willing to negotiate hot rolled, cold rolled, galvanized and Galvalume steel prices. We found 97 percent of those responding to our survey reporting mills as willing to negotiate […]
Flat rolled steel prices continued their swan dive with hot rolled and cold rolled moving $10 per ton lower and galvanized/Galvalume moving lower by $20 per ton. For the first time in quite awhile SMU picked up information regarding HRC offers down to $460 per ton (with tons). Most buyers, however, were reporting $480 to […]
Flat rolled steel prices took a nose dive this past week according to the steel indexes followed by Steel Market Update. We saw large double digit drops in hot rolled, cold rolled, galvanized, Galvalume and plate. Benchmark hot rolled continues its march toward sub-$500 per ton averages. We lowered our average by $15 per ton […]
When looking at hot rolled coil prices U.S. buyers need to remain aware of what is going on with the rest of the world. Prices in Europe are rising and as one trader put it to us on Friday of this past week, “The Turks aren’t idiots.” Prices for HRC in the Turkish market are […]
Every Tuesday Steel Market Update publishes our flat rolled steel price ranges and index averages. Throughout the week we analyze information gathered from steel buyers from around the country. At times we spot a trend developing but don’t have enough price points to justify fully adjusting either the lower or upper end of our range. […]
The number of active steel buyers has definitely slowed over the past few weeks. Buyers are holding back as business has slowed for some, inventory levels are OK (and in some situations rising) and lead times are pulling back making the need to buy less urgent. When taking into consideration lead times, we are also […]
Steel Market Update spoke with two sources regarding the most recent complaint filed by the domestic mills against Vietnam and China for circumvention of duties (China) on cold rolled and CORE (corrosion resistant steels such as galvanized and Galvalume) products. One of the tenants behind the accusations made by the domestic steel mills is the […]
Steel Market Update spent a good portion of our day today talking with steel traders and end users who have exposure (orders on the books not yet delivered) to Vietnamese cold rolled and/or galvanized/Galvalume steels. We were trying to determine how the importers of record were handling any orders on the books. What we found […]
On Monday of this week the US Department of Commerce released Preliminary Census Data for August foreign steel imports. Based on the latest data August came in a smidgen below 3.0 million net tons. The DOC has August foreign steel imports as totaling 2,988,724 net tons. This is 277,325 tons fewer than the month of […]