The year 2017 proved a bit “odd” as the threat of political action against foreign steel worked against the domestic steel mills. Early in the year, newly crowned President Trump authorized the U.S. Department of Commerce, led by former steel magnate Wilbur Ross, to investigate if the steel industry is essential to the U.S. for […]
Mill lead times have inched up slightly in the past two weeks following price hikes announced by the major mills earlier this month, according to the latest data from Steel Market Update’s flat roll market questionnaire. One of the key indicators tracked by SMU, lead times reflect the activity at the mills and the order […]
Buyers of flat rolled steel report that more mills are holding the line on pricing following the price increases announced earlier this month. Mill order books are firm and there’s no negotiating for a better price, according to 28 percent of respondents to SMU’s latest steel market questionnaire. About 22 percent say they still find […]
Eight out of 10 respondents to this week’s SMU market trends questionnaire believe the fundamentals are pointing toward higher steel prices in the first quarter. As one service center executive commented, “it’s only a question of how high and for how long.” But so far, the price increases announced by the major mills this month […]
Flat rolled and plate steel prices moved higher this past week, according to all of the steel indexes followed by Steel Market Update. Benchmark hot rolled jumped to $640 per ton on both Steel Market Update (SMU) and Platts indexes. SteelBenchmarker did report prices and their HRC average was $626 per ton, up $8 per […]
Flat rolled steel prices jumped this week as buyers and sellers of steel react to the latest round of price increase announcements. Last week, there was a $50 per ton increase announced on steel plate and then later in the week the sheet mills announced a $30 per ton price increase on hot rolled, cold […]
With mill order books extending into February on some products, most domestic steel producers have announced price increases. Steel Market Update sees steel prices moving higher for the next 30-60 days. The steel plate mills were the first to go last week, adding $50 per ton ($2.50/cwt) to the base price of plate steel. SSAB […]
Demand for sheet products improved in the three months through October by 3.2 percent year over year, led by hot rolled and other metallic coated. Demand for Galvalume is surging at the expense of galvanized sheet, according to Steel Market Update’s latest analysis of American Iron and Steel Institute (AISI) and U.S. Department of Commerce […]
This analysis breaks down the imported tonnage of six flat rolled products into the district of entry and the source country. We believe that misinformation (or lack of) about regional import volumes is often used to influence purchase decisions. Our intent with this analysis is to describe in detail what is going on in a […]
Flat rolled prices moved higher as the domestic mills announced yet another price increase this past week. There is now a large division between Platts and Steel Market Update (SMU) steel indexes as we prefer to wait a few days to let the dust settle after an increase has been announced. Benchmark hot rolled, prior […]
Mill lead times have seen little change in the past month, according to the latest data from Steel Market Update’s flat roll market questionnaire, despite the price hikes announced by the mills two weeks ago. One of the key indicators tracked by SMU, lead times reflect the activity at the mills and the order levels […]
Buyers of flat rolled steel report that domestic steel mills are tightening up negotiations a bit on spot pricing, especially on cold rolled and coated products, as would be expected following the price increases announced two weeks ago. But the majority report that mills are still generally open to price discussions as the year comes […]
Rolled steel imports into the United States declined by 12.7 percent in the three-month period from September-November, compared with the prior three months, June-August. Sheet products declined by 11.4 percent on the same basis, according to weekly licensed import tonnages reported by of the U.S. Department of Commerce on Dec. 5. The data is reported […]
As a result of this week’s preliminary circumvention ruling, Vietnamese traders here in the United States must pay the Chinese duties on the substrate used to produce cold rolled and CORE (corrosion resistant) steels if they are unable to prove the substrate used was from another country. Here’s the actual ruling: “The Department of Commerce […]
Flat rolled steel prices are firming and heading higher. SMU found hot rolled prices over the past week remaining the same as the week before. All of the other flat rolled products saw their averages move higher. Here is how we see prices this week: Hot Rolled Coil: SMU price range is $590-$640 per ton […]
Late this afternoon, the U.S. Department of Commerce released their positive determination that Vietnam and China circumvented existing antidumping (AD) and countervailing duties (CVD) on cold rolled and corrosion resistant (galvanized/Galvalume) steels. This is a significant ruling and will create issues for some trading companies and steel buyers as the ruling goes back to November […]
We had yet another week of “mixed” spot pricing in flat rolled and plate products, according to the Steel Market Update (SMU), Platts and SteelBenchmarker steel price indexes. Benchmark hot rolled was down for the week, according to the SMU and Platts steel price indexes. SMU saw the HRC price average as $615 per ton, […]
Imports of foreign steel will be much lower in November than at any time since April 2016. Based on the most recent license data released on Tuesday, Nov. 28, imports will be approximately 2.6 million tons. This is down from 3.1 million tons in October and is also less than the 2.8 million tons imported […]
Steel Market Update canvassed a large number of flat rolled and plate steel buyers during the course of the last 24 hours. The goal was to better understand where spot prices were being offered (and by whom) and if there were any differences in momentum or the negotiation positions of the various steel mills. We […]
Flat rolled steel prices were once again “mixed” with hot rolled prices higher, cold rolled lower (on SMU), galvanized lower, Galvalume no change and plate higher this past week compared to the previous week. Both Platts and Steel Market Update (SMU) saw the benchmark hot rolled price average as higher this past week. The spread […]
Flat rolled and plate steel prices are all over the place this week. We are seeing a distinct difference in pricing from those mills who still have November and December tonnage compared to those whose lead times are into January and beyond. Hot roll appears to be the strongest product with virtually all of our […]
U.S. demand for steel sheet products continued to expand through September, according to Steel Market Update’s analysis of data from the American Iron and Steel Institute (AISI) and the U.S. Department of Commerce. Apparent supply is a proxy for market demand. Demand momentum for sheet products in total was negative in the three months through […]
Flat rolled steel prices are still mixed, according to the various steel indexes followed by Steel Market Update. SteelBenchmarker produced prices this past week and saw all items as moving higher. Platts, on the other hand, had a modest increase in hot rolled and a fairly significant decrease in cold rolled while plate remained the […]
The latest lead time data based on the Steel Market Update flat rolled steel survey—largely unchanged from two weeks ago–offers no clear indication of whether this week’s price announcements by three of the flat rolled steel mills will be accepted by the marketplace. SMU began collecting responses from steel buyers on Monday of this week, […]
Buyers of flat rolled steel report that most domestic steel mills are open to negotiating spot prices, especially on cold rolled and coated products, even though the major mills announced price hikes this week. About half of the respondents to this week’s Steel Market Update market trends questionnaire reported a mixed market, with some mills […]
Flat rolled steel prices were mixed this past week. Benchmark hot rolled continues to be one of the better performing of the group. Our HRC average was up $5 per ton this week. Cold rolled was also up, galvanized was sideways and Galvalume dropped $30 per ton. Plate prices on a delivered basis were up […]
This Steel Market Update analysis breaks down the imported tonnage of six flat rolled steel products by district of entry and source country through September 2017. We believe that misinformation (or a lack of) about regional import volumes is often used to influence purchase decisions. Our intent with this analysis of tonnage by district of […]
Flat rolled prices were mixed this past week with benchmark hot rolled dropping some of its recent gains. The spread between Steel Market Update (SMU) and Platts on cold rolled shrunk compared to what we reported one week ago. Coated products were mixed with galvanized steel remaining at prior-week levels and Galvalume increasing by $10 […]
There was a surge in foreign steel imports during calendar year 2014. That high rate continued into the first half of 2015 at which time the domestic steel mills filed antidumping (AD) and countervailing duty (CVD) cases on CORE (coated steels), cold rolled and hot rolled steels. The U.S. Department of Commerce investigation found most […]
Flat rolled steel prices were mixed this week. There was no clear-cut direction being set, although the expectation is for prices to rise once lead times go into January. For that matter, we did hear from some steel buyers who placed December HRC orders for $600 per ton and at the same time placed January […]