Steel prices had upward momentum in November following multiple price increase announcements by the mills on flat rolled and plate products. Steel Buyers Sentiment moved upward along with the prices as service centers and OEMs anticipated a strengthening market. After bottoming in mid-October at around $480 per ton, the benchmark price for hot rolled steel […]
In what will be seen as supportive of higher domestic steel prices, ferrous scrap prices are expected to jump by $30 per ton or more in December on tight supplies and improving demand in the U.S., following on a similar increase in November. “Going into December and year end , the U.S. scrap market has […]
Ferrous scrap prices settled up $30-40/GT in December for most regions and most grades, on top of the $15-20/GT increase in November, lending further support to rising finished steel prices. Not only did prices find support from seasonally tighter scrap supply, but mill demand was stable or higher month over month for most regions, said […]
Virgin steel is made with iron ore, coke and limestone. It was done that way, and only that way, for many decades. Then along came the “mini” mills. So-called minimills recycle ferrous scrap, mixing it with pig iron or other iron units and melting it down in large electric arc furnaces to produce new steel. […]
As of mid-November, steel prices appear to be moving upward following price increases announced by the major flat rolled and plate mills. How high and for how long is the subject of much debate and speculation. The market is clearly split between those in a buying mode in anticipation of sustained higher prices and those […]
By CRU Principal Analyst Chris Asgill There has been a marked rise in Chinese imports of pig iron and HBI this year. This has been primarily due to limited domestic scrap supply that cannot be offset by external supply due to restrictions in scrap imports. Limited scrap supply relative to demand has meant that scrap prices in […]
Ferrous scrap prices traded $15-25/GT higher in November, with some variation by region, report Steel Market Update sources. Scrap prices were widely expected to rise in November due to slowing scrap flows, mills returning from seasonal outages, rising import demand and the onset of winter weather in some parts of the country. “Mills’ appetite for […]
Steel prices continued their decline in October to an average hot rolled price below $500 per ton, prompting a $40 per ton price increase announcement by the flat rolled mills late in the month. With a price change in play, Steel Market Update switched its Price Momentum Indicator to Neutral. Widespread concerns about the declining […]
SMU contributor Gaurav Chhibbar is a partner at Metal Edge Partners, a firm engaged in Risk Management and Strategic Advisory. In this role, he and his firm design and execute risk management strategies for clients along with providing process and analytical support. In Gaurav’s previous role, he was a trader at Cargill spending time in […]
Ferrous scrap prices are expected to rise by about $20/GT in November, lending support to the increase in flat rolled prices announced by the mills last week. “With mills seeking the price hike, they are unlikely to push scrap lower. It would make their negotiating position more difficult,” said Ryan McKinley, CRU North America analyst. […]
Except for a brief uptick this summer, steel prices have been on the decline since March and breached the $500 per ton level in mid-October—a psychological line in the sand that leaves steel buyers wondering: Have prices hit bottom? Is it time to replenish inventories? Flat rolled steel prices took a steep dive last month, […]
Steel Dynamics CEO Mark Millett enthusiastically spoke of the new steel mill planned for Sinton, Texas, during the company’s third-quarter earnings call. “We are excited about our Sinton, Texas, flat roll steel mill project, and the associated long-term value creation it will bring through geographic and value-added product diversification. This facility is designed to have […]
John Packard is traveling… Here’s what readers of Steel Market Update have learned this week. Steel prices continue to slide. By Steel Market Update’s calculation, the benchmark price for hot rolled steel now averages $515 per ton. That’s the lowest in 2019. Given the widespread reports of disappointing demand, worsened by the strike at GM […]
Lack of demand for ferrous scrap, especially in the Ohio Valley and Chicago market, forced prices down another $30-40/GT for October, on top of a similar decline in September, sources tell Steel Market Update. Scrap prices are their lowest in years, dropping eight out of the last 10 months. Shred prices today are around $215/GT, […]
The global market share of U.S. scrap exports continues to increase, according to this quarterly analysis of data from the Iron and Steel Statistics Bureau (ISSB) in the UK. We believe that to improve our understanding of the gyrations of the domestic scrap market, we should be aware of where the U.S. stands as a […]
Editor’s note: The Chinese government currently bars exports of ferrous scrap to other parts of the world to assure China of an adequate domestic supply. As this analysis by CRU Principal Analyst Chris Asgill points out, China’s economy will eventually generate a scrap supply that far exceeds its scrap consumption, opening up the doors to […]
Virgin steel is made with iron ore, coke and limestone. It was done that way, and only that way, for many decades. Then along came the “mini” mills. So-called minimills recycle ferrous scrap, mixing it with pig iron or other iron units and melting it down in large electric arc furnaces to produce new steel. […]
Virgin steel is made with iron ore, coke and limestone. It was done that way, and only that way, for many decades. Then along came the “mini” mills. So-called minimills recycle ferrous scrap, mixing it with pig iron or other iron units and melting it down in large electric arc furnaces to produce new steel. […]
There have been some discussions recently with articles written about the global scrap trade and China. China is the world’s largest steel producing nation with 50 percent (or greater) of the world’s steel production. A couple of years ago, I received information from one of my Chinese trading contacts about scrap steel being exported out […]
Domestic steelmakers managed to reverse the year’s long downtrend in steel prices for a few weeks in July and August, but the turnaround was short-lived. As of mid-September, Steel Market Update’s Price Momentum Indicator is pointing firmly lower for hot rolled, cold rolled and coated steel prices, as well as for steel plate, as the […]
John Packard is on vacation… Have the mills lost their pricing momentum on flat rolled? It sure looks that way, based on the latest Steel Market Update data. About 38 percent of the OEM and service center executives responding to SMU’s market trends questionnaire this week report that the mills have lost their momentum and […]
Following on a small $20 increase in August, ferrous scrap prices for September are down $30 to $40 per ton as U.S. mills adjusted to lower demand and planned for upcoming fall shutdowns. “Prices fell this month amid a confluence of factors including ample supply, a weakening export market and mill outages,” reported CRU North […]
Despite slight upward momentum in steel pricing in August, steel buyers’ sentiment languished in the +40s on SMU’s index. This tepid optimism likely reflects widespread concerns in the market about steel demand in the second half and the staying power of steel prices following the recent increases announced by the mills. The average price for […]
Ferrous scrap prices are starting to settle as of today. Initial checks with some of our scrap sources found prime grades down $40 and obsolete grades down $30 in portions of the Midwest. We learned the Cleveland area mills bought busheling down $20 to $300/gross ton. We also learned of a purchase of HMS at […]
Steel Market Update sources report that ferrous scrap prices have turned around after repeated declines in the first half of the year and are settling up $20/GT for August, lending support to recent price increases on finished steel. “Demand is about the same for August as it was in July, there is just a little […]
Demand for HVAC products remains relatively strong in an otherwise lukewarm steel market, but members of the Heating, Air Conditioning & Refrigeration Distributors International (HARDI) say they are challenged by declining galvanized steel prices and rising intensity from the competition. Polled six weeks ago, nearly all the HARDI members expected galvanized steel prices to stay […]
The long-awaited rebound in steel prices was the biggest story of the month in July. Steel Market Update’s Price Momentum Indicator was pointing firmly upward by the end of the month following three $40 price increase announcements by flat rolled steel producers. The benchmark price of hot rolled steel hit $580 per ton in July, […]
The wait is over—Steel Dynamics has announced it will build its new $1.9 billion flat rolled steel mill in Sinton, Texas, 30 miles northwest of Corpus Christi. The new steel mill will serve the four-state Texas area, the western U.S. and Mexico market regions, representing approximately 27 million tons of relevant flat rolled steel consumption—7 […]
Steel Dynamics is expecting modest growth for steel consumption in the second half of 2019 supported by the end of steel inventory destocking and further reduction of steel imports. “The team delivered a solid second-quarter performance in a challenging steel pricing environment,” said SDI President and CEO Mark Millett. “A weakening scrap price environment coupled […]
Domestic steelmakers showed solidarity this week in their pursuit of higher flat rolled steel prices with most major mills announcing their third $40 increase in just the past month. U.S. Steel and USS-POSCO Industries (UPI) were the latest to notify customers of their price change on Tuesday, following on announcements Monday by Nucor and ArcelorMittal […]