Nucor Corp. “immediately” halted sourcing pig iron and other raw materials from Russia following the invasion of Ukraine in late February, the company’s top executive said. “The day after the invasion happened, we stopped buying materials immediately from Russia and have taken nothing from them,” Nucor president and CEO Leon Topalian said. “We pivoted very quickly […]
ArcelorMittal has agreed to acquire a controlling stake in Voestalpine’s hot-briquetted iron (HBI) plant in southern Texas, in a deal that values the operations at $1 billion. The Luxembourg-based steelmaker will take an 80% stake in the plant located in Portland, Texas – just outside of Corpus Christi. Opened in October 2016, it’s one of […]
Voestalpine is in advanced talks to sell a majority stake in its hot-briquetted iron (HBI) plant in southern Texas, the company said. “In recent months, Voestalpine has been conducting an open-ended market sounding to stabilize the business model of its direct reduction plant in Corpus Christi, Texas.” The Austrian specialty steelmaker didn’t disclose a potential […]
U.S. Steel Corp. is investing $60 million at Gary Works to give the Indiana mill the capability to produce up to 500,000 tons of pig iron annually and provide a critical raw material for the steelmaker’s electric arc furnaces. Once complete in the first half of 2023, pig iron production at Gary will provide nearly […]
Some North American flat-rolled steelmakers were silent when asked what the impact of the conflict between the U.S. and Russia might be on their operations. Others said their supply lines weren’t in the crossfire. One reason for the silence in some corners: Many rely heavily either on Russian slab or Russian or Ukrainian pig iron […]
The Ontario government will contribute $500 million ($393 million U.S.) towards ArcelorMittal Dofasco’s $1.8 billion clean tech project to decrease its carbon intensity in steelmaking. The Hamilton-based steelmaker – a subsidiary of multinational ArcelorMittal SA – is working towards decreasing its greenhouse gas emissions by replacing its coal-fed coke ovens and blast furnaces with hydrogen-enabled […]
First the takeaway: Don’t overthink it on the way down. Prices are falling, like it or not. The good thing, demand is still good – so don’t let falling prices ruin your holidays. Now, let’s overthink it a little. We’ve seen some chunky declines in recent weeks: SMU’s hot-rolled coil price fell $70 per ton […]
Earnings season is (mostly) done and dusted, so I’d like to turn your attention to another season: M&A announcement season. Bankers like to get deals done before Christmas. And I think there is a decent chance that any deals in the pipeline now are announced in the next month or so. Also, while spot prices […]
ArcelorMittal recorded it best quarterly earnings performance since 2008 in the third quarter as sharply higher prices offset lower shipment volumes. The shipment declines came partly because of weaker demand and order cancellations from the automotive sector, the company said. The automotive industry has struggled with various supply chain issues, most notably – but not […]
Ternium is considering adding a new electric arc furnace to its operations in North America as well as downstream cold rolling and coating capability. That’s according to sources familiar with the matter and as indiciated in recent public comments from company executives. The most likely candidate for any new EAF would be Pesquería, Mexico – […]
Nucor Corp. plans to take a 25-day outage at its Gallatin sheet mill in Ghent., Ky., for final equipment installation for a hot-rolled capacity expansion there. The outage will begin on Nov. 23. Once it is completed, the new electric-arc furnace (EAF) and related equipment will be commissioned, company executives said during an earnings conference […]
Nucor Corp. has taken a planned outage at is direct-reduced iron (DRI) plant in Trinidad. “As it’s planned, we do not anticipate any impact on production,” a spokeswoman for the Charlotte, N.C.-based steelmaker said. Nucor did not specify when the Trinidad outage started or how long it might last. The issue will probably be discussed […]
As “the next precious metal,” prime scrap is a growth opportunity and a logical fit for Cleveland-Cliffs, which announced Monday that it plans to acquire Detroit-based Ferrous Processing and Trading Co. (FPT). The $775-million deal, Cliffs’ first foray into scrap, comes as no big surprise to most market observers. Cleveland-Cliffs is the largest producer of […]
Cleveland-Cliffs Inc. has agreed to acquire Midwestern scrap recycler Ferrous Processing and Trading Co. (FPT) for $775 million. The deal means the Cleveland-based steelmaker has secured its own reserves of prime scrap, which Cliffs Chairman, President and CEO Lourenco Goncalves has previously characterized as a “precious metal.” FPT recorded earnings before interest, taxes, depreciation and amortization […]
Cleveland-Cliffs Inc. has agreed to acquire Midwestern scrap recycler Ferrous Processing and Trading Co. (FPT) for $775 million. The deal means the Cleveland-based steelmaker has secured its own reserves of prime scrap, which Cliffs Chairman, President and CEO Lourenco Goncalves has previously characterized as a “precious metal.” FPT recorded earnings before interest, taxes, depreciation and amortization […]
A lot has been written about how a severe shortage of prime scrap could be the lasting result of the widespread shift to electric arc furnace (EAF) steelmaking. I’d like to take a minute to point out that tri-state area around Pittsburgh, which Nucor is considering for its $2.7 billion, three-million-tpy EAF sheet mill mill, […]
Nucor has enough raw material to supply its planned $2.7 billion, 3-million tpy sheet mill, but is exploring new technologies that might help it further reduce carbon emissions. The Charlotte, N.C.-based steelmaker is eyeing a range of options – including increased use of shredded scrap in its sheet mills’ electric-arc furnaces (EAFs), “green” pig iron […]
Nucor’s direct-reduced iron (DRI) plant in Covent, La., remains down after being pre-emptively idled ahead of Hurricane Ida last month. The reason: the storm resulted in a barge shortage on the Mississippi River, a Nucor spokeswoman said. “We are prepared to resume operations as soon as additional barges are available,” she said. The Charlotte, N.C.-based […]
NLMK USA’s operations in western Pennsylvania have secured enough liquid hydrogen (H2) to avert a shortage caused by Hurricane Ida, the company said. The steelmaker was notified after the storm ripped through the Gulf Coast earlier this month that a hydrogen supplier might not be able to meet its commitments. There were initial fears that […]
Nucor plans to restart its direct-reduced iron (DRI) plant in Louisiana after pre-emptively idling the facility ahead of Hurricane Ida. “Our Nucor teammates and their families are safe, and the DRI plant did not sustain any major damage from the storm,” a company spokeswoman said. “We expect to resume operations in the coming days when […]
Swedish steelmaker SSAB said it has produced the world’s first-fossil free steel and delivered a trial order to automaker Volvo. “It’s possible to … significantly reduce the global carbon footprint of the steel industry. We hope that this will inspire others to also want to speed up the green transition,” SSAB President and CEO Martin Lindqvist […]
ArcelorMittal Dofasco plans to spend Canadian $1.77 billion ($1.41 billion U.S.) to install a new direct-reduced iron (DRI) plant and electric arc furnace (EAF) at its steel mill in Hamilton, Ontario. The subsidiary of multinational steelmaker ArcelorMittal SA said the project hinges on support from the Canadian government, which has agreed to contribute C$400 million […]
ArcelorMittal Dofasco plans to spend Canadian $1.77 billion ($1.41 billion U.S.) to install a new direct-reduced iron (DRI) plant and electric arc furnace (EAF) at its steel mill in Hamilton, Ontario. The subsidiary of multinational steelmaker ArcelorMittal SA said the project hinges on support from the Canadian government, which has agreed to contribute C$400 million […]
Record steel prices = record profits for steel mills. And so it was record second-quarter profits all around, with even better expected in the third quarter. We’re not going to guess whether spot prices will continue upward for the balance of Q3. But contract prices, which lag spot prices, will. And that alone should be […]
Record steel prices = record profits for steel mills. And so it was record second-quarter profits all around, with even better expected in the third quarter. We’re not going to guess whether spot prices will continue upward for the balance of Q3. But contract prices, which lag spot prices, will. And that alone should be […]
Nucor set a new quarterly earnings record in the second quarter and expects to notch another in the third. The Charlotte, N.C.-based steelmaker – America’s largest – reported a profit of $1.51 billion in the second quarter of this year, up 60% from $942.2 million in the first quarter, and up nearly 14-fold from $108.9 million in the […]
One of two United Steelworkers (USW) locals at Algoma Steel is opposed to the Ontario mill’s proposed switch from integrated steelmaking to electric arc furnace (EAF) production. USW Local 2251 President Mike DaPrat went so far as to boycott an event at the mill – attended by Canadian Prime Minister Justin Trudeau – to announce government-funding […]
Steel Dynamics Inc. (SDI) aims to be carbon neutral at its electric arc furnace (EAF) steel mills by 2050. The steelmaker has also set interim emissions reductions goals for 2025 and 2030. Namely, it plans to reduce combined Scope 1 and Scope 2 greenhouse gas emissions at its EAF mills by 20% by 2025 and […]
Though he admits it was not the original plan, Cleveland-Cliffs Chairman, President and CEO Lourenco Goncalves said Wednesday at AISTech that his company no longer intends to produce merchant pig iron for sale to competitors, as has been widely speculated. In the past two years, Cleveland-Cliffs has purchased AK Steel and ArcelorMittal USA, making it the largest […]
ArcelorMittal wants to be carbon neutral by 2050, but reaching that goal will hinge on developing new ways to take fossil fuels – namely, coal and natural gas – out of the steelmaking process, a company executive said. It will also require that key technologies – carbon capture and storage (CCS), biofuels and other renewable […]