By Stephen Williamson, CRU Research Manager, Aluminum Aluminum prices went through the $3,000 per metric ton mark on the LME this week. Fueled by energy constraints in China and tightening supply of alloy hardeners, the price broke through the $2,950 ceiling and ran up another $200. The price leveled at $3,150 as of this writing […]
By Stephen Williamson, CRU Research Manager, Aluminum Last week’s aluminum price below $3,000 per metric ton on the LME seemed like a bargain until it ran above $3,300 earlier this week. Yet, at week’s end, trading fell back to $3,050. Further confounding the market is magnesium supply and the prices raging on the hardener front. […]
By CRU Advisor Greg Wittbecker LME cash aluminum prices have retreated hard from new 13-year highs, falling from $3,300 last week to reach $2,682 as we completed the week. Supply-side Price Concerns Get a Reality Check but Remain Dangerous Market euphoria over supply-side constraints ran into the effect of China’s “command economy” at work. Power […]
By CRU Principal Analyst Josh Spoores, from CRU’s Steel Sheet Products Monitor Over the past five weeks since we last reviewed the CME Group’s HR coil futures market, there has been a renewed surge in volatility. Spot prices of physical HR coil have clearly plateaued, yet more likely started a new downtrend, and futures prices […]
By CRU Senior Analyst Ryan McKinley from CRU’s Steel Metallics Monitor The CRU metallics price indicator (CRUmpi) changed little in October, declining slightly by 0.4% to 374.1. Price directions were mixed but fell by the most for European scrap and DRI while scrap prices in Asia had the largest increases. We expect to see similar […]
By CRU Principal Analyst Josh Spoores, from CRU’s Steel Sheet Products Monitor After 14 consecutive months of rising global sheet prices, CRU’s Global Flat Products Steel Price Indicator (CRUspi flats) has fallen m/m. This indicator fell 3.5% as sheet prices continue to fall across most regional markets. The U.S. Midwest market remains the last holdout […]
By CRU Senior Analyst Dimitry Popov and Analyst Wei Wang In recent weeks, China has been experiencing the worst power shortages in decades. Various industries in 20 provinces have been affected and even residential customers had power cuts in the extreme cases. Increasing electricity demand, short coal supply and the decarbonization drive are three main […]
By CRU Senior Analyst Ryan McKinley, from CRU’s Steel Sheet Products Monitor Steel sheet price declines continue in the USA and Europe as lead times shorten further and inventories build. In the former market, small transactions are occurring at levels above $1,900 /s.ton, but there are many more deals occurring at well below this level. As […]
Cheaper foreign hot rolled steel imports continue to tempt U.S. buyers over steel produced domestically, holding potential discounts of 25-43%, according to Steel Market Update’s latest foreign versus domestic hot rolled steel price comparison. Foreign hot rolled steel prices are now theoretically $483-832 per ton cheaper than domestic steel, after taking freight costs, trader margins […]
By CRU Principal Analyst Josh Spoores, from CRU’s Steel Sheet Products Monitor North American sheet prices are lower m/m as prices in the U.S. have finally started to fall, at least for HR coil. Over the past several weeks, the amount and overall volume of spot transactions between mills and buyers have slowed, yet we […]
As I bounce around the market this week talking to steel buyers, I am trying to get a better feel for potential changes, how contract negotiations are going, how receptive end-user customers are toward the higher prices being offered (compared to one year ago), and what kind of foreign steel offers are out there. The […]
Cleveland-Cliffs Inc. has agreed to acquire Midwestern scrap recycler Ferrous Processing and Trading Co. (FPT) for $775 million. The deal means the Cleveland-based steelmaker has secured its own reserves of prime scrap, which Cliffs Chairman, President and CEO Lourenco Goncalves has previously characterized as a “precious metal.” FPT recorded earnings before interest, taxes, depreciation and amortization […]
Cleveland-Cliffs Inc. has agreed to acquire Midwestern scrap recycler Ferrous Processing and Trading Co. (FPT) for $775 million. The deal means the Cleveland-based steelmaker has secured its own reserves of prime scrap, which Cliffs Chairman, President and CEO Lourenco Goncalves has previously characterized as a “precious metal.” FPT recorded earnings before interest, taxes, depreciation and amortization […]
Whether they believe steel prices are in for a sharp or a gradual correction, most of the service center and manufacturing executives responding to SMU’s latest survey agree the market is at a turning point. Here are a few of their recent observations: “Yes, I think we are at the inflection point. The market appears to be […]
Steel Market Update will once again be working with Port Tampa Bay as we host the 33rd edition of the Tampa Steel Conference. The 2022 TSC will be held on Feb. 14-16 at the Marriott Waterstreet Hotel in Tampa, Fla. This conference is the second largest steel event of its type in North America (second only […]
Steel Market Update will once again be working with Port Tampa Bay as we host the 33rd edition of the Tampa Steel Conference. The 2022 TSC will be held on Feb. 14-16 at the Marriott Waterstreet Hotel in Tampa, Fla. This conference is the second largest steel event of its type in North America (second only […]
By CRU Senior Analyst Ryan McKinley and Analyst Dave Thewlis, from CRU’s Steel Long Products Monitor Long product prices in the U.S. remained elevated and moved higher again m/m in some cases for October. Wire rod mills pushed through another round of price increases in mid-September and there was little to no resistance from buyers […]
By CRU Principal Analyst Erik Hedborg, from CRU’s Steelmaking Raw Materials Monitor Iron ore prices have increased in the past week on post-holiday optimism that a real estate collapse can be avoided and the fact that steel production is increasing after the Chinese holiday. CRU has assessed the iron ore price at $132.0 /dmt, up […]
Now is a good time to think about protecting your business. Steel Market Update’s Introduction to Steel Hedging: Managing Price Risk course will introduce you to hedging principles and give you a solid foundation, so you can learn how to protect your business and minimize the risk associated with unfavorable price changes. In just two […]
By CRU Economist Frank Eich and CRU Research Analyst Clifton Hoong As addressing climate change has become an increasingly urgent political priority, policy makers have been keen to develop the available tool kit to address this challenge. Within that tool kit, carbon pricing plays an important role as it has been identified as one of […]
Sheet prices are mixed this week. Hot rolled is up $10 per ton, cold rolled is down $30 per ton, and galvanized base prices are unchanged. What do you make of a week like this when there is no clear trend? First, I would caution against reading too much into any one week – especially when […]
By CRU Senior Editor Ryan McKinley, from CRU’s Steel Sheet Products Monitor Sheet prices outside of the USA fell markedly this week as demand declines and inventories build. The largest of these declines occurred in Europe, as lower-priced imports forced Italian domestic prices to fall below the €1,000 /t mark for the first time since […]
As domestic hot rolled steel prices remain above $1,900 per ton, cheaper foreign steel imports continue to tempt U.S. buyers with potential discounts of 21-44%, according to Steel Market Update’s latest foreign versus domestic hot rolled steel price comparison. Foreign hot rolled steel prices are now theoretically $408-843 per ton cheaper than domestic steel, after taking freight costs, […]
With trading still winding down today, it appears ferrous scrap prices for October will settle down $20/GT on prime grades and sideways for obsoletes. Most Steel Market Update sources expect scrap prices to start moving higher in the months ahead. “After Cleveland-Cliffs bought busheling last week basically sideways, the U.S. mills stubbornly waited a week […]
After a small decline in October, ferrous scrap prices are expected to strengthen in November and beyond on strong export demand and tightening seasonal supplies, sources tell Steel Market Update. CRU Senior Analyst Ryan McKinley sees upward momentum for scrap prices in the weeks and months ahead. Export demand is increasing, he said, pointing to […]
Join Steel Market Update next week for the final Steel 101 Workshop of 2021, running virtually on Tuesday and Wednesday, Oct. 5-6. Unsure what to expect from the virtual training experience? SMU and CRU have been successfully running virtual events on our customized virtual platform since 2020, including the previous SMU Steel Summit and Tampa Steel Virtual Conference. […]
By CRU Aluminum Advisor Greg Wittbecker Aluminum prices touched a 13-year high last week, flirting with $3,000 per metric ton on the LME. That throwback to 2008 is not a coincidence, corresponding to the last time that primary aluminum supply-demand balances were as tight as they are in 2021. In the period 2006 to first […]
By Stephen Williamson, CRU Research Manager, Aluminum Aluminum prices continue to flirt with $3,000 per metric ton on the LME. While off a bit, now at $2,866, recent upsets in the market make price volatility the norm in the near term. Energy curtailments in China exacerbate not only global aluminum supply but also silicon (Si) […]
By Stephen Williamson, CRU Research Manager, Aluminum As in last week’s report, aluminum prices continue to flirt with the $3,000 per metric ton mark on the LME, $2,908/t as of this writing. However, this apparently steady price range belies a torrent of market activity. The protracted energy curtailments in China continue to cast doubt on […]
A lot has been written about how a severe shortage of prime scrap could be the lasting result of the widespread shift to electric arc furnace (EAF) steelmaking. I’d like to take a minute to point out that tri-state area around Pittsburgh, which Nucor is considering for its $2.7 billion, three-million-tpy EAF sheet mill mill, […]