By Greg Wittbecker, Advisor, CRU Group Prices are higher…. why aren’t we seeing more aluminum production? One of the most natural questions being asked in the world of aluminum is “with LME prices up so much year on year, why aren’t we seeing more capacity coming back to life?” It IS an appropriate question and […]
By CRU Senior Prices Analyst Estelle Tran, from CRU’s Global Steel Trade Service, Nov. 18 In the last several weeks, U.S. sheet prices have started to decline, though prices remain well above global prices. Under pressure from imports and service centers eager to sell high-cost inventory before the end of the year, prices for processed […]
By CRU Principal Analyst Matthew Watkins, from CRU’s Global Steel Trade Service, Nov. 18 There was a big price collapse in China over the past month. HR coil export prices have fallen by 13% since October and rebar is down by 10% in the same period. For HR coil, this means that China has returned […]
Steel industry legend Peter Marcus died unexpectedly overnight following a brief illness. As word of his death spread across the steel industry, people reached out to SMU not only with memories of the man but also of the forecasts that made him famous (some would say infamous). “Peter Marcus was the ultimate scholar of the […]
Steel industry legend Peter Marcus died unexpectedly overnight following a brief illness. As word of his death spread across the steel industry, people reached out to SMU not only with memories of the man but also of the forecasts that made him famous (some would say infamous). “Peter Marcus was the ultimate scholar of the […]
By CRU Senior Analyst Thais Terzian and Analyst Chris Bandmann, from CRU’s Crude Steel Market Outlet, Nov. 15 There is currently a lot of market discussion that the EU may act to restrict scrap exports. Here we look at who could be hurt and who might see opportunities. Other regions have already acted to protect […]
Hot-rolled coil prices continue to slide. And galvanized base prices are holding more or less steady. What gives? Check out the slide below. The green line is galvanized base prices. The blue line is lead times. Prices are on the left-hand side of the slide. Lead times are on the right. Prices have been around […]
New to the industry or want to learn more? The Steel 101 team is here to help! Steel Market Update’s Steel 101: Introduction to Steelmaking & Market Fundamentals workshop has been helping businesses empower their employees (from entry level to C-suite executives) for well over a decade. It’s sound advice to invest in your staff’s […]
By Greg Wittbecker, Advisor, CRU Group Quotas in exchange for exemption, a bad precedent for other countries There has been much written about the new détente between the EU27 and the USA in the aftermath of the deal to suspend duties on European steel and aluminum. There are also reports that something may also be […]
Algoma Steel posted record profits in its fiscal second quarter, and the Canadian flat-rolled steelmaker expects money to continue to pour in as high spot prices roll into 2022 contracts. The Sault Ste Marie, Ontario-based company also thinks that the traditional relationship between sheet and plate prices will be restored as infrastructure spending increases demand for […]
By CRU Principal Analyst Josh Spoores, from CRU’s Steel Sheet Products Monitor, Nov. 10 Global sheet prices have continued to fall, though declines have not been consistent across all regions. Overall, CRU’s Global Flat Products Steel Price Indicator (CRUspi flats) fell for the second consecutive month, declining by 2.9% and is now at its lowest […]
Even as domestic prices ease, foreign steel imports continue to tempt U.S. buyers with potential discounts of 24-43%, according to Steel Market Update’s latest comparison of domestic and foreign hot rolled steel prices. Foreign hot rolled steel prices are now theoretically $452-801 per ton cheaper than domestic steel, after taking freight costs, trader margins and tariffs […]
Steel buyers are “confused” as are some traders as to what deals are being offered into the hot rolled market right now. Steel Market Update has been advised by a couple of large HRC buyers of offers below $1,600 per ton ($80.00/cwt), while at the same time we have spoken to buyers who continue to […]
Steel Market Update will host a number of conferences and steel training workshops during calendar year 2022. Here is a select listing of events which will be held during the 1st Quarter 2022 plus a reminder of the dates for the 2022 SMU Steel Summit Conference which is the largest steel conference of its kind […]
By CRU Principal Analyst Erik Hedborg, from CRU’s Steelmaking Raw Materials Monitor, Nov. 9 Iron ore prices remain under pressure as Chinese steel production levels remain low and iron ore inventories continue to pile up, both at ports and at steel mills. A price of $92 /dmt is the lowest seen since May 2020, and […]
By CRU Chief Economist and Head of Sustainability Jumana Saleheen and CRU Research Manager Paul Butterworth There are no low-cost options when it comes to tackling climate change. Renewable energy is not cheaper than fossil-based power once the price of investment and storage are considered. Low-carbon energy will cost more. The only way to incentivize […]
Steel industry lobbying groups and trade unions cheered passage of the bipartisan House $1 trillion infrastructure bill – which experts estimate could result in millions of tons of new steel demand. The legislation devotes approximately $850 billion to steel-intensive infrastructure, according to estimates from the American Iron and Steel Institute (AISI). The House vote, which occurred late […]
Steel Market Update will once again be working with Port Tampa Bay as we host the 33rd edition of the Tampa Steel Conference. The 2022 TSC will be held on Feb. 14-16 at the Marriott Water Street Hotel in Tampa, Fla. This conference is the second largest steel conference of its type in North America […]
By Greg Wittbecker, Advisor, CRU Group Since I spoke at the Fall Management Meeting, the market has continued to experience tremendous volatility and new variables to consider. CRU has recently updated its expectation for market balances, premiums and LME prices. These forecasts can be seen in detail through our Aluminum Market Outlook subscription. Here are […]
The management team at Ryerson reported solid third-quarter results on Thursday and expressed optimism about underlying demand in the fourth quarter and into next year. “The pricing environment is still healthy and strong underpinned by good demand – demand deferred, not denied – and we see that continuing into 2022,” Ryerson President and CEO Eddie […]
By CRU Principal Analyst Josh Spoores Trade representatives from the USA and Europe came to an agreement at the end of October in regard to the Section 232 tariffs on steel and aluminum. The Department of Commerce further announced on Oct. 31 that consultations regarding the trade of steel remain ongoing between the USA and […]
By CRU Senior Analyst Ryan McKinley from CRU’s Steel Sheet Products Monitor Falling demand in most markets around the world has continued to weigh on steel sheet prices. Meanwhile, the announcement that the USA will remove Section 232 tariffs on steel and aluminum producers in the EU and replace them with a quota system means […]
It goes without saying, the steel industry is in a dynamic, volatile market and the only thing that is certain is the volatility will continue as we move into calendar year 2022. It is not just price we need to watch over the coming months. There are many moving pieces to this puzzle. The agreement […]
It goes without saying, the steel industry is in a dynamic, volatile market and the only thing that is certain is the volatility will continue as we move into calendar year 2022. It is not just price we need to watch over the coming months. There are many moving pieces to this puzzle. The agreement […]
“Business is great! Why is Steel Market Update always spreading so much gloom and doom about falling steel prices?” That’s not an actual quote, but we hear comments to that effect nearly every week. As if folks believe it will be a self-fulfilling prophecy. Of course, if prices decline, it won’t be because of some […]
Even as domestic hot rolled steel prices fall below $1,900 per ton, cheaper foreign steel imports continue to tempt U.S. buyers with potential discounts of 25-43%, according to Steel Market Update’s latest foreign versus domestic hot rolled steel price comparison. Foreign hot rolled steel prices are now theoretically $478-803 per ton cheaper than domestic steel, […]
I thought I’d be writing today that Steel Market Update had switched all its steel pricing momentum indicators to lower. But what you think should happen and what reality serves up are sometimes very different things. Hot-rolled coil prices continued to fall – they’re down $25 per ton compared to last week. That’s not a surprise. […]
Do you sense the steel market is changing? “There is definitely a different tone to the market over the past few weeks,” said one of the many buyers responding to Steel Market Update’s questionnaire this week expressing similar views: “There are many more sellers than buyers now. Domestic pricing will slide soon.” “The market has […]
By CRU Analyst Helen O’Cleary, from CRU’s Zinc Monitor Zinc’s price started LME Week looking mildly bullish on short covering, with the 3-month official price settling at $3,246 /t on Oct. 12. By Oct. 15, it had reached $3,944 /t, turbocharged by news of smelter cutbacks in Europe due to soaring energy prices and the […]
In this year’s edition of CRU Breakfast – part of LME Week – we explored three key themes that shaped the commodities markets – the global economic and commodities outlook, the changing role of China, and Navigating ESG. All three themes have been central to many developments in the industry and remain equally crucial moving […]