The Bureau of Labor Statistics issued a dismal employment report for May with the U.S. economy seeing a net gain of just 75,000 nonfarm jobs. Last month, 90,000 jobs were created in the private sector while government lost 15,000 positions. To put these figures in perspective, they should be considered over a longer time frame, […]
Suppliers of steel products to the HVAC industry find themselves stuck in a good news/bad news market. Demand remains good as the construction season ramps up, but pricing on galvanized steel continues to weaken. “Demand in the Southeast is still very good, even though there has been a painful devaluation of our inventory,” said one […]
Imported steel prices are no longer competitive with domestic steel mill pricing – even on light gauge galvanized and other specialty products that normally have gone to trading companies. Lead times are short, but as one steel executive put it to me this afternoon, “It’s not that the mills have no business. [For this time […]
The Dodge Momentum Index, a monthly measure of the initial report for nonresidential buildings in planning, slipped 1.4 percent in May to a reading of 141.0 from a revised reading of 142.4 in April. The commercial component of the index dropped 6.9 percent while the institutional component rose 8.1 percent. On a year-over-year basis, the […]
Results for First Four Months of 2019 Combined Show Ongoing Strength Aside from Single-Family Market; Association Officials Urge End to Tariffs That Pose Threat to Construction Costs and Demand AGC, June 7, 2019 — Construction spending was unchanged from March to April, with mixed results by project type for the month and for the year […]
Job growth in two industries vital to the steel industry, manufacturing and construction, showed signs of slowing in May. The U.S. added a total of just 75,000 jobs in May, well below the 180,000 to 185,000 jobs forecast by economists. In addition, the Labor Department revised employment levels downward for March and April. The March […]
The Georgia International Convention Center (www.gicc.com) as well as the three Gateway Hotels (Marriott, Renaissance and SpringHill Suites) are all conveniently located at the first stop of the free SkyTrain out of the Atlanta International Airport (ATL). The second stop on the SkyTrain is for car rentals. Our overflow hotel – the Atlanta Airport Marriott […]
2019 SMU Steel Summit Conference – A Sneak Peek – Day 1 Written by: John Packard, President & CEO, Steel Market Update RE: 2019 SMU Steel Summit Conference, August 26-28, 2019 – Location: Georgia International Convention Center, Atlanta, GA The Georgia International Convention Center (www.gicc.com) as well as the three Gateway Hotels (Marriott, Renaissance and […]
The Coalition of American Metal Manufacturers and Users issued the following statement on the one-year anniversary (June 1) of full implementation of the Section 232 tariffs on steel and aluminum imports: The Coalition of American Metal Manufacturers and Users (CAMMU) is encouraged by the termination of Section 232 steel and aluminum tariffs on Mexico and […]
Manufacturing in May grew at its slowest pace in two and a half years amid trade tensions and slower demand, reports the Institute for Supply Management. The PMI for the Manufacturing ISM Report on Business decreased 0.7 percentage points from April to a reading of 52.1 percent. The index for new orders gained one percentage […]
Key Market Indicator trends deteriorated in May and were the worst since October 2016, according to Steel Market Update’s analysis. This report is designed to be a big picture summary of data we have reported in detail during the month. In it we summarize 36 data streams that critically describe the state of the steel […]
China’s crude steel production in April exceeded an annualized rate of one billion tons for the first time as the Asian giant continues to grow its global market share, according to Steel Market Update’s analysis of the latest World Steel Association data. On March 27, the OECD Steel Committee reported: “Low growth prospects for the […]
Construction employment expanded in 250 of 358 metro areas in the 12 months through April, according to the latest analysis of employment data by the Associated General Contractors of America. Employment declined in 53 areas and was unchanged in 55. Workforce shortage continues to be a problem for the construction industry, said AGC. “Demand for […]
The chairman of Mexican steel producer Altos Hornos de Mexico SAB was arrested on Tuesday in an anti-corruption probe, resulting in the freezing of AHMSA accounts and a possible disruption to steel production in Mexico. The investigation involves the sale by AHMSA of an idled fertilizer plant in 2014, allegedly worth $50 million, to oil […]
By CRU Principal Analyst Josh Spoores In the U.S. Midwest market, sheet prices have continued to decline on increased domestic, and now North American, supply. In addition to rising supply, falling scrap costs have also allowed EAF-based mills to remain competitive at these lower prices. It has now been one week since Canada and Mexico […]
By CRU Senior Analyst Erik Hedborg Iron ore prices continued to climb in the past week with a sharp price jump on Monday lifting prices to $108.0 /t on Tuesday, May 28. This translates to a $6.5 /t increase w/w. Seaborne supply outside of Minas Gerais is recovering. Supply from Port Hedland, although falling w/w, […]
Construction employment continues to increase in April, but the Associated General Contractors of America say that demand would support the hiring of more workers if they were available. AGC urges the government to enact immigration reform that would boost the supply of qualified workers. “Contractors face an ever-increasing challenge to find enough qualified workers to […]
Rail transport is a critical link in getting steel to market. With domestic mills cranking out steel at more than 80 percent of their capacity, are the railroads struggling to keep up? “People assume our business should be booming, but it’s not as straightforward as one would think,” said JR (Jim) Schaaf, Group Vice President […]
Demand for long products and tubular goods have shown strong growth, but sheet products are declining. This analysis by SMU staff is based on data from the American Iron and Steel Institute (AISI) and the U.S. Department of Commerce (DoC). The analysis summarizes total steel supply by product from 2003 through March 2019 and year-on-year […]
The competitiveness of steel continues to lose ground against aluminum and plastic, according to the latest data from the Bureau of Labor Statistics. Cold rolled steel sheet has become less competitive against aluminum sheet in the last year and this has carried through to steel and aluminum cans. Steel tubular goods have lost ground to […]
The Associated General Contractors of America applauded the Trump administration’s plan to welcome skilled immigrants to the United States. AGC says the immigration policy would help the construction industry fill workforce shortages. Trump’s plan would prioritize approval of immigrants based on skill or merit. The points-based system would favor young, educated, highly-skilled individuals who can […]
Although not a disaster, steel demand has fallen short of expectations so far in 2019, contributing to the downtrend in steel prices. The benchmark price for hot rolled steel has declined by double digits since the beginning of the year. Steel Market Update’s canvass of the market over the past week reveals that many service […]
The following article discussing the global ferrous derivatives markets was written by David Feldstein. As an independent steel market analyst, advisor and trader, we believe he provides insightful commentary and trading ideas to our readers. Note that Steel Market Update does not take any positions on HRC or scrap trading, and any recommendations made by […]
Housing starts jumped 5.7 percent in April to a seasonally adjusted annual rate of 1,235,000, said the Department of Commerce in its latest report. Single-family starts led the way with a 6.2 percent increase, while homes of five units or more increased 2.3 percent. Starts soared by 84.6 percent in the Northeast and 42 percent […]
By the CRU Economics Team The Turkish economy is suffering its first recession in a decade. This has had knock-on effects on the global steel market, given Turkey’s prominence in this industry. A key question for the steel market is therefore, how long will the recession in Turkey last? We think that in the most […]
More than 40 percent of respondents to Steel Market Update’s market trends questionnaire this past week said they are confused by the current steel market and price direction. Judging by their comments, it’s unclear to many why steel prices are declining at a time when the economy is so strong, imports are down and the […]
Data in Steel Market Update’s Steel Buyers Sentiment Index continues to trend more pessimistic with Current Sentiment hitting its lowest reading in two and a half years. Industry executives appear less optimistic in light of declining steel prices, uncertain demand and contentious negotiations with U.S. trading partners. The goal of the index is to measure […]
Primetals Technologies will supply an Arvedi Endless Strip Production line for the U.S. Steel Edgar Thomson Plant in Pennsylvania. The ESP line is the first to be constructed in the United States and has a rated annual capacity of 2.76 million tons of high quality, ultra-thin strip. The ESP line will be able to produce […]
By Paul Lowrey Editor’s note: Paul Lowrey is an industry consultant and president of Steel Research Associates, LLC. He will be a featured speaker at the upcoming Steel Market Update Steel Summit Aug. 26-28 in Atlanta. Click here for more information and to register for the summit. Recent announcements of new flat rolled capacity have […]
By Paul Lowrey Editor’s note: Paul Lowrey is an industry consultant and president of Steel Research Associates, LLC. He will be a featured speaker at the upcoming Steel Market Update Steel Summit Aug. 26-28 in Atlanta. Click here for more information and to register for the summit. Recent announcements of new flat rolled capacity have […]