By CRU Senior Analyst Ryan McKinley, from CRU’s Steel Metallics Monitor The CRU metallics price indicator (CRUmpi) rose by 5.9 percent m/m to 223.5 (see chart) following price increases in nearly every market, the highest level since August 2019. Solid scrap demand has offset better than seasonally typical supply due to mild winter weather in the Northern Hemisphere. […]
The following article discussing the global ferrous derivatives markets was written by David Feldstein. As an independent steel market analyst, advisor and trader, we believe he provides insightful commentary and trading ideas to our readers. Note that Steel Market Update does not take any positions on HRC or scrap trading, and any recommendations or comments […]
A leading indicator of nonresidential construction spending rose in December, but yearly data suggests construction spending may see a slowdown in 2020. The Dodge Momentum Index, a monthly measure of the initial report for nonresidential building projects in planning, gained 1.5 percent last month for a reading of 156.2. Planning for institutional projects rose 2.3 […]
Flack Global Metals has hired metals industry veteran Ben Markham as chief commercial officer. Markham brings 30 years of senior management experience to FGM and will play a key role in the leadership, design and execution of the company’s commercial development activities and corporate branding. Markham, a veteran of the U.S. Air Force, has extensive […]
Commercial Metals Company is looking forward to a steady construction market in 2020 for its merchant bar and rebar products. “We are positioned to continue benefiting from the positive trends in our core markets and remain optimistic about the construction market, as many of the macro indicators we monitor point to resilience ahead,” said President […]
A.M. Castle & Co., a global distributor of specialty metal and supply chain services, announced that President Marec Edgar has been named chief executive officer following the retirement of Steve Scheinkman as chairman and CEO. Scheinkman will remain on Castle’s board of directors serving as a senior advisor. Mike Sheehan, currently a director, will assume […]
At the end of August, Steel Market Update will host our 10th SMU Steel Summit Conference. Our conference will be the largest flat rolled and plate steel event in North America during this calendar year. The 2020 SMU Steel Summit Conference is going to be our best attended and most informative conference yet as 1,200 […]
At the end of August, Steel Market Update will host our 10th SMU Steel Summit Conference. Our conference will be the largest flat rolled and plate steel event in North America during this calendar year. The 2020 SMU Steel Summit Conference is going to be our best attended and most informative conference yet as 1,200 […]
Steel Market Update is pleased to share this Premium content with Executive level members. For more information on how to upgrade to a Premium-level subscription, email Info@SteelMarketUpdate.com. Key Market Indicators showed a substantial improvement in market trends in the December data. This report is designed to be a big picture summary of data SMU has […]
The December Manufacturing ISM Report on Business showed economic activity contracting in the U.S. last month. The PMI fell 0.9 points to 47.2 percent and its lowest reading since July 2009. A PMI below 50 indicates business is contracting and a reading above 50 indicates expansion. The December PMI marks the fifth consecutive month of contraction. […]
Construction spending improved in November, boosting optimism among contractors regarding new projects for 2020. Construction spending rose 4.1 percent to a seasonally adjusted annual rate of $1.324 trillion from November 2018 to November 2019, while industry employment grew in 63 percent or 226 out of 358 metro areas, according to a new analysis of federal […]
Key Market Indicators showed a substantial improvement in market trends in the December data. This report is designed to be a big picture summary of data SMU has reported in detail during the month. It summarizes 36 data streams that describe the state of the steel market and provide forward guidance for steel buyers and […]
Housing starts increased 3.2 percent in November to a seasonally adjusted annual rate of 1,365,000. Starts were 1.36 percent above the November 2018 rate. Commencement of construction for single-family homes increased 2.4 percent from October, while starts for buildings of five units or more increased 2.3 percent. New construction was strongest in the South with […]
Welcome back from the Christmas Holidays. This is the 149th Executive level issue of Steel Market Update produced during calendar year 2019. It is also anticipated to be the last Executive issue prior to the New Year. On Monday we will publish our last Premium issue of the year, our 49th for 2019. Christmas and […]
Fitch Ratings, a global leader in credit ratings and research, is forecasting a negative outlook for the global steel industry in 2020 and challenging conditions in North America. The Fitch Ratings 2020 Outlook: Global Steel notes weaker economic growth impacted by ongoing trade and geopolitical tensions. “Over the past two years companies have talked at […]
By CRU Analyst Sam Grant, from CRU’s Zinc Monitor The North American market (U.S., Canada and Mexico) accounts for approximately 9.6 percent of global refined zinc demand. This year, we have seen a sharp slowdown in both global trade and industrial production, with the North American region experiencing its slowest rate of IP growth since […]
U.S. Steel announced today that it intends to “indefinitely idle” a significant portion of its Great Lakes Works operation near Detroit. The decision was made to better align the company with its three core flat rolled operations and advance its “best of both strategy” as an integrated and EAF company. U.S. Steel expects to begin idling […]
U.S. Steel announced today that it intends to “indefinitely idle” a significant portion of its Great Lakes Works operation near Detroit. The decision was made to better align the company with its three core flat rolled operations and advance its “best of both strategy” as an integrated and EAF company. U.S. Steel expects to begin idling […]
Nucor Steel says it will add a new coil paint line at its Mississippi County sheet mill in Arkansas. The new coil paint line will have a capacity of 250,000 tons per year and is expected to start up in the first half of 2022. “The new coil paint line will diversify our product and […]
By CRU Principal Analyst Matthew Watkins, from the Steel Sheet Products Market Outlook The European Green Deal for the EU was launched on Dec. 11 by the new European Commission. This is a strategy that aims both at achieving zero net emissions of greenhouse gases by 2050 and at managing the transition to that state […]
U.S. Steel tonight announced their intention of focusing their company on three core assets: Gary Works, Mon Valley Works and Big River Steel. This comment was made at the same time they announced their intention to idle a large portion of their Great Lakes Works near Detroit. WARN notices have been sent to the 1,500+ […]
I have been extremely busy working on the keynote speakers for the 2020 SMU Steel Summit Conference. Based on the moves I am making right now, I believe we will have the strongest program ever – especially on the final day of the conference. I don’t want to totally tip my hand quite yet as […]
SSAB Americas plans to be the first supplier of fossil-free steel in North America. The company has targeted 2026 for its operations in Montpelier, Iowa, to be powered completely by renewable energy. The Montpelier facility is powered primarily by wind farms operated by MidAmerican Energy. The steel produced at the Iowa mill is used to […]
Steel Dynamics is expecting lower earnings in the fourth quarter due to planned outages, lower shipments and refinancing costs. Earnings are expected to be in the range of $0.49 to $0.53 per diluted share compared to $0.69 per share in the third quarter and $1.17 per diluted share in Q4 2018. Annual maintenance outages at […]
Builders are feeling confident about the market for newly built single-family homes. The National Association of Home Builders/Wells Fargo Housing Market Index rose five points to 76 in December after an upward revision to the November reading. This is the highest reading for the HMI since June 1999. “Builders are continuing to see the housing […]
November housing starts increased 3.2 percent from October and 13.6 percent from November 2018, indicates the latest report from the U.S. Census Bureau and the U.S. Department of Housing and Urban Development. Starts decreased in the Northeast and Midwest, but increased 10.3 percent in the South and 1.4 percent in the West. Single-family starts were […]
We are quickly moving toward the Christmas and Hanukkah Holidays with Hanukkah beginning Sunday evening and Christmas next Wednesday. Which reminds me, I think I have some shopping to get done (I haven’t started yet). Am I the only one? My expectation is for the markets to calm down over the next couple of weeks […]
Steel consumption in China is expected to ease back to 881 Mt next year, down from the record 886 Mt anticipated this year, according to forecasts by China’s Metallurgical Industry Planning and Research Institute. Crude steel production is projected to mirror those figures by falling to 981 Mt in 2020 from a record 988 Mt […]
In October, demand for sheet products declined by more than the seasonal norm. Demand for long products is softening as construction expenditures decline. This analysis by Steel Market Update is based on steel mill shipment data from the American Iron and Steel Institute (AISI) and import-export data from the U.S. Department of Commerce (DoC). The […]
The following article discussing the global ferrous derivatives markets was written by David Feldstein. As an independent steel market analyst, advisor and trader, we believe he provides insightful commentary and trading ideas to our readers. Note that Steel Market Update does not take any positions on HRC or scrap trading, and any recommendations or comments […]