US housing starts pulled back in June after a hitting an 11-month high in May. Total privately owned housing starts were at a seasonally adjusted annual rate (SAAR) of 1,434,000 units in June, according to the latest estimates from the US Census Bureau. Starts in May were revised slightly downward, from the previous estimate of […]
The US Federal Reserve said that overall economic activity has inched up since May in its latest Beige Book Report released on July 12. The Beige Book is a compilation of information on current economic conditions, gathered by each district Federal Reserve Bank, and is published eight times per year. The newest report by the Fed on the state […]
Commercial Metals Co. (CMC) has secured a permit giving it the go-ahead to begin construction of its new micro mill in West Virginia. The Irving, Texas-based longs and scrap producer said on July18 the West Virginia Department of Environmental Protection granted it the permit, allowing for the commencement of construction of its “fourth technologically advanced micro […]
The US Federal Reserve said that overall economic activity has inched up since May in its latest Beige Book Report released on July 12. The Beige Book is a compilation of information on current economic conditions, gathered by each district Federal Reserve Bank, and is published eight times per year. The newest report by the Fed on the state […]
Commercial Metals Co. (CMC) has secured a permit giving it the go-ahead to begin construction of its new micro mill in West Virginia.
Steel prices continued to erode in June, a trend that began halfway through April. Hot-rolled coil (HRC) prices ended June at $875 per ton (43.75 per cwt) on average, falling by $115 per ton throughout the month. The SMU Price Momentum Indicator for sheet products remained shifted to Neutral halfway through June, after turning Lower […]
SMU’s Current and Future Steel Buyers Sentiment Indices swapped directions again this week, with current increasing and future sentiment easing, according to our most recent survey data. Every other week we poll steel buyers about sentiment. The Steel Buyers Sentiment Indices measure how steel buyers feel about their company’s chances of success in the current market, as well as […]
Total US construction spending increased in May by 0.9% from April and 2.4% year-over-year (YoY), according to the Associated General Contractors of America (AGC). “The data for May show there has been no letup in the feverish pace of manufacturing construction but a very mixed picture for other project types,” said Ken Simonson, chief economist of AGC. […]
The United States and Indian governments have agreed to terminate six disputes at the World Trade Organization (WTO). Benefits from the settlement include opening the US to more shipments of steel and aluminum made in India, according to New Delhi. “As a part of the agreement, the US has agreed to grant market access to […]
The US Department of Commerce recently updated antidumping and countervailing duty rates on a number of different welded pipe and tube products. An SMU review of the US government’s Federal Register show the following changes by Commerce in multiple administrative reviews: Welded Line Pipe from South Korea Considering the one-year period ended Nov. 30, 2021, […]
On Monday and Tuesday of this week, SMU polled steel buyers on a variety of subjects, including steel prices, demand levels, and import offers. Rather than summarizing the comments we received, we are sharing some of them in each buyer’s own words. We want to hear your thoughts, too! Contact david@steelmarketupdate.com to be included in our […]
China’s recent reopening, coupled with increased government spending on infrastructure, has led Fitch Ratings to upgrade the outlook for the global steel sector from deteriorating to neutral. The New York-based ratings agency revised China’s steel sector outlook to neutral as well, according to a research note sent to SMU. China’s “stronger-than-expected infrastructure growth and a […]
China’s recent reopening, coupled with increased government spending on infrastructure, has led Fitch Ratings to upgrade the outlook for the global steel sector from deteriorating to neutral. The New York-based ratings agency revised China’s steel sector outlook to neutral as well, according to a research note sent to SMU. China’s “stronger-than-expected infrastructure growth and a […]
Companies should keep a watchful eye on pricing and lead times, according to members of the Heating, Air-Conditioning & Refrigeration Distributors International (HARDI) speaking on the June 27 meeting of its Sheet Metal/Air Handling Council. During May’s meeting, most HARDI participants thought that prices would continue to drop. Over half of the individuals thought it […]
European sheet prices have declined sharply by €112-146 per metric ton ($110-144 per net ton) month-on-month (MoM), around 12-18% across all sheet products. In CRU’s latest assessment, German hot-rolled coil decreased by €125 MoM to €689 per metric ton ($680 per net ton), while Italian HR coil saw a drop of €146 to €657 per […]
CRU research manager Stephen Williamson shares an update on the aluminum market and pricing with SMU readers. This article was written The LME rallied in the days following the debt ceiling resolution by Congress and the price of aluminum pressed towards $2,300 per metric ton. This week, however, the price fell back through a key […]
US mills are now seeking as much as $950 per ton ($47.50 per cwt) for hot-rolled coil after the latest round of price hikes. The big question remains whether that figure will stick, “stop the bleeding,” or if it risks failing. It’s too early to provide any concrete answers to that. Our latest market survey found […]
Positive structural trends in the North American market are supporting strong earnings results for Commercial Metals Co. The Irving, Texas-based longs producer and metals recycler reported lower fiscal third-quarter sales and earnings compared to levels seen in the year-ago quarter during the 2022 earnings boom, but its results remain strong, said CEO Barbara Smith. “CMC […]
In a good sign for the construction markets, architectural firms saw a rebound in business conditions in May after experiencing a softer April. The American Institute of Architects (AIA) and Deltek reported a May reading of 51.0 in the Architecture Billings Index (ABI). This was a rise from the previous month’s reading of 48.5 and […]
Ternium announced this week that its new slab mill will be built in Pesquería, Nuevo León, Mexico. The Luxembourg-based Latin American steelmaker had said earlier this year it would build an electric-arc furnace (EAF) and direct-reduced iron (DRI) facility in North America. Brownsville, Texas, had been rumored to be in the running for the new […]
Overall housing starts hit a 13-month high in May as construction of both single-family and multi-family homes spiked. Total housing starts were at a seasonally adjusted annual rate (SAAR) of 1.631 million units in May. This was a 22% rise from the month prior and a 6% increase year-on-year (YoY). May’s SAAR of single-family housing […]
We are counting down the days until SMU’s Steel Summit Conference on Monday-Wednesday, Aug. 21-23, in Atlanta. It’s only a little over two months away. Approximately 755 people have already registered. Our discounted room blocks are almost gone. Register here. The event will again be held at the Georgia International Convention Center, a massive conference center in close […]
Steel Dynamics (SDI) is expecting stronger earnings for the second quarter of 2023 vs. the previous quarter, but lower than the year-earlier period. The Fort Wayne, Ind.-based steelmaker released Q2 earnings guidance on June 16 in the range of $4.78 to $4.82 per diluted share. This compares with Q1’s $3.70 per diluted share and prior-year Q2 […]
Metallics prices have fallen in most global markets over the last month, driven by weak steel demand and improved metallics supply. Lower finished steel prices and EAF margins have weighed heavily on metallics prices across major markets. Scrap bids from key buyers have reduced further amid ample availability, while recent pig iron price cuts have […]
The Congressional Steel Caucus held a hearing on The State of the Steel Industry in Washington on Wednesday, June 7, where prominent steel executives and the United Steelworkers (USW) union gave testimony on issues such as international trade and sustainability. In his opening remarks, US Rep. Frank Mrvan (D.-Ind.), vice-chairman of the Caucus, stressed his […]
The LME aluminum three-month price is moving higher again as the week ending June 9 closes trading at $2,230/t. Failing to dip below the critical transition price of $2,000/t, The LME steadied itself despite very lackluster demand anywhere in the world. Trading in China also kept the regional exchange there neutral, if not a bit […]
Housing affordability is on the rise in the US, but builders are facing challenges in providing affordable housing, the National Association of Home Builders (NAHB) reports. In the first quarter of the year, 45.6% of new and existing home sales were affordable to American families earning the country’s median income of $96,300, according to the […]
The Dodge Momentum Index (DMI) fell for the third consecutive month in May as weakness in commercial planning persists, according to the latest data from the Dodge Construction Network (DCN). The index reading is at its lowest level in nine months. The DMI dropped 2% to 180.5 in May from the revised April reading of 184.1 but […]
Unemployment is falling in the construction sector, with 25,000 jobs added in May to meet growing demand, according to an analysis of new government data by the Associated General Contractors of America (AGC). “Demand for construction workers remains strong, outside of homebuilding,” Ken Simonson, AGC’s chief economist, said in a statement on June 2. “Contractors […]
I wanted a fresh perspective on the steel market this week, so I turned to a new voice – namely, ChatGPT. I won’t weigh in on whether the AI-driven chatbot is a useful tool, an extinction-level threat, or just another shiny object. That said, ChatGPT has been available publicly since Nov. 30, 2022. And it […]