Tag: Cleveland-Cliffs

Cleveland-Cliffs Inc. has agreed to purchase Canada’s Stelco Holdings Inc. in a deal valued at $2.5 billion (CA$3.4 billion).

Three steel trade groups and United Steelworkers (USW) union held an event on Capitol Hill urging action on strengthening legislation against unfair trade.

North America has one of the most robust steel scrap markets in the world. The continent has a long history of steel production, significant imports of steel and steel-containing products, and mature steel consumption. Due to this, the reservoir of scrap available to be recycled each year in the US and other North American markets is substantial and growing.

U.S. Steel and Nippon Steel explained their position on USS’ participation in US trade cases should their proposed nearly $15-billion merger deal go through. The companies hope to close the deal by the end of the year.

A press conference at a Cleveland-Cliffs mill in Ohio touched upon several topics, including the unfair trade practices of Mexico and China and Nippon Steel’s proposed acquisition of U.S. Steel.

Cleveland-Cliffs on Tuesday announced its monthly hot-rolled (HR) coil price of $720 per short ton (st) with the official opening of its August order book. The rate is down from last month’s price of $800/st.

The conventional wisdom is that sheet prices will trend down for the next few weeks (maybe the next two months) before rising again in August – around when lead times stretch into the busier fall months. We see that reflected in our survey results and in market chatter. And there are plenty of data points to choose from if you want to support of that position.

When it comes to steel decarbonization, we do not need to compromise our climate ambition to make the types of demanding steel products needed for our 21st-century economy. Nevertheless, many of the world’s highest-emitting steel producers and their allies would have you believe that one cannot be done without the other. They are wrong. They […]

ArcelorMittal plans to continue to invest and expand its operations in North America, a senior company executive said in an exclusive interview with SMU. “People were talking about our demise in North America or maybe our exit. And I want to emphasize that nothing could be further from the truth,” said Brad Davey, executive vice president and head of corporate development at the company.

The major steel-handling port in Burns Harbor, Ind., is getting substantial infrastructure upgrades.

The chatter about the June ferrous scrap market has been noticeably muted as we come off the Memorial Day weekend.

Let's take a collective deep breath ::in:: and ::out::... And we're back. But where exactly are we? Are steel prices going up or down? Is demand really decelerating or is it an illusion? How is the market navigating the new mill pricing mechanisms?

Cleveland-Cliffs is potentially eyeing a buy of NLMK USA’s Midwest assets, according to a report in Bloomberg.

After achieving its 2030 greenhouse gas (GHG) emissions reduction targets well ahead of schedule, Cleveland-Cliffs Inc. has set new reduction goals.

Cleveland-Cliffs is seeking at least $800 per short ton (st) for hot-rolled (HR) coil with the opening of its July order book. The Cleveland-based steelmaker said the move was effective immediately in a letter to customers on Thursday, May 23. Recall that Cliffs announced in April that it would publish a monthly HR price. The […]

U.S. Steel’s board of directors has published a letter accusing Cleveland-Cliffs of a campaign of “misinformation” intended to “derail the transaction” of Japan’s Nippon Steel Corp. (NSC) to buy the Pittsburgh-based steelmaker. However, Cliffs has clapped back, with a release rebutting USS’ allegations.

Sometimes even in a bit of chaos there is complacency. And it seems that since March 2020, “a bit of chaos” has been the order of the day. That means in the world at large, and in steel specifically.

SMU had the pleasure of attending the American Iron and Steel Institute's (AISI's) annual general meeting in Washington this week. It was a slow week in our nation's capital, so we were able to take a leisurely stroll around the National Mall and take in the sights. Just kidding. In fact, the meeting coincided with significant trade actions announced by the Biden administration. It included, among other things, additional tariffs on Chinese steel and aluminum.

Cleveland-Cliffs’ Lourenco Goncalves thinks trade measures announced by the US government on Tuesday against China were just the opening salvo in a series of trade actions. Case in point: The Biden administration targeted China’s “unfair” trade policies with additional tariffs on an array of Chinese-made goods - including steel, aluminum, and EVs.

Our spot price is little changed this week after moving sharply lower last week on the heels of Nucor’s unexpected price cut. Here’s one thought on that trend: Nucor's weekly HR price (aka, its “Consumer Spot Price” or CSP) has to date functioned almost more like a monthly price.

What's the tea in the steel industry this week? Here's the latest SMU gossip column! Just kidding... kind of. Yes, some of the comments we receive in our weekly flat-rolled market steel buyers' survey are honestly too much to put into print. Some make us laugh. Some make us cringe. Some are cryptic. Most are serious. We appreciate them all. Below are some highlights from our survey results this week. Some of the comments that we can share with you are also included, in italics, in the buyers' own words, with minimal editing on our part.

The Inflation Reduction Act (IRA) appropriated more than $4 billion to the General Services Administration (GSA) and Federal Highways Administration (FHWA) for “Buy Clean” programs. The statute makes clear that GSA and FHWA purchases under these programs are limited to those with “substantially lower” emissions. There is no ambiguity in that requirement. The Environmental Protection Agency (EPA) has defined “substantially lower” to mean products with the lowest 20% of embodied emissions when compared to similar materials.

A vote on Friday by the International Trade Commission (ITC) ensures that antidumping duties on certain steel sheet imports from Japan will continue for the mid-term.

Unless you've been under a rock, you know by know that Nucor's published HR price for this week is $760 per short ton, down $65/st from the company’s $825/st a week ago. I could use more colorful words. But I think it’s safe to say that most of the market was not expecting this. For starters, US sheet mills never announce price decreases. (OK, not never. It has come to my attention that Severstal North America rescinded a price increase back on Feb. 14, 2012. And it caused quite the ruckus.)

The EU has approved Tokyo-based Nippon Steel Corp.’s (NSC’s) proposed buy of U.S. Steel, a report in Reuters on Monday said.

Is it just me, or does it seem like the summer doldrums might have arrived a little early? I could be wrong there. It’s possible we could see a jump in prices should buyers need to step back into the market to restock. I’ll be curious to see what service center inventories are when we update those figures on May 15. In the meantime, just about everyone we survey thinks HR prices have peaked or soon will. (See slide 17 in the April 26 survey.) Lead times have flattened out. And some of you tell me that you’re starting to see signs of them pulling back. (We’ll know more when we update our lead time data on Thursday.)

The election campaign is white-hot right now, and the Biden administration is touting its protectionist message. Just this past week, the Office of the US Trade Representative (USTR) touted this message. In a release entitled “What They are Saying,” USTR quoted many of the usual protectionist groups praising government action against Chinese steel exports and shipbuilding. Consuming industries in the United States, which employ many times the American workers as the industries seeking trade protection, were not mentioned.

The sale of U.S. Steel Corp. to Nippon Steel Corp. has been delayed by the US Department of Justice’s antitrust investigation. The Justice Department, which is conducting an antitrust review of the merger, has requested additional information from both USS and NSC. The companies originally anticipated closing the sale in the second or third quarter […]

Everybody has a plan… until they’ve dealt with volatility in the HRC market. While Mike Tyson’s original quote was about getting punched in the mouth, it’s unlikely the ex-champ has gone many pricing rounds with hot-rolled coil.

U.S. Steel posted slightly lower Q1’24 earnings as stronger earnings from its sheet mills were partially offset by a weaker performance from it tubular division. All told, the Pittsburgh-based steelmaker reported Q1’24 earnings of $171 million. That's down 14.1% from $199 million in Q1’23 on sales that fell 6.9% to $4.16 billion in the same comparison.