Major domestic steelmakers have announced a $40 per ton ($2/cwt) hike in the price of hot rolled, cold rolled and galvanized steel products, fueling the debate over whether current market conditions can support an increase or if the latest announcement is bound to flop like the last one in October. West Coast mills California Steel […]
U.S. Steel is the latest mill to announce a price increase. Like Nucor, U.S. Steel notified its sales organization on Monday that its base pricing for all new flat rolled spot orders would increase by a minimum of $40 per net ton, effective immediately. U.S. Steel’s last price change on flat rolled was also a […]
U.S. Steel is the latest mill to announce a price increase. Like Nucor, U.S. Steel notified its sales organization on Monday that its base pricing for all new flat rolled spot orders would increase by a minimum of $40 per net ton, effective immediately. U.S. Steel’s last price change on flat rolled was also a […]
Following on last week’s announcement by West Coast mills, Nucor’s Sheet Mill Group today also announced a $40 per ton ($2/cwt) increase on hot rolled, cold rolled and galvanized steel products, effective immediately on new and unconfirmed orders. The price hike comes as no surprise as Nucor and other mills east of the Rockies were […]
Following on last week’s announcement by West Coast mills, Nucor’s Sheet Mill Group today also announced a $40 per ton ($2/cwt) increase on hot rolled, cold rolled and galvanized steel products, effective immediately on new and unconfirmed orders. The price hike comes as no surprise as Nucor and other mills east of the Rockies were […]
Steel Market Update sources disagree on whether ferrous scrap prices will see a small decline or move sideways in February. But the market remains unusual for this time of year when scrap prices normally increase as the mills restock ahead of new-year steel demand. Scrap prices surprised the market with a $30-40 per ton decrease […]
Steel Market Update asked: When do you expect flat rolled steel prices to reverse course and begin rising? Judging by the widely varied responses to this week’s market trends questionnaire, there is no clear consensus among steel buyers on when prices will turn around. A small group, about 6 percent, said they believe prices will […]
California Steel Industries (CSI) and USS-POSCO Industries (UPI) announced price increases of $40 per ton ($2.00/cwt) on Monday, hoping to stem the slide in flat-rolled steel prices that began last summer. The announcements do not include plate. In its Jan. 21 letter to customers, CSI stated that it is opening its order book for flat-rolled […]
On Monday, California Steel Industries (CSI) and USS/POSCO (UPI) advised customers of their intention to take spot prices on flat rolled products produced by the two mills up by $40 per ton ($2.00/cwt). This is the first price announcement out of either mill since October 2018. So far, there have not been any announcements out […]
On Monday, California Steel Industries (CSI) and USS/POSCO (UPI) advised customers of their intention to take spot prices on flat rolled products produced by the two mills up by $40 per ton ($2.00/cwt). This is the first price announcement out of either mill since October 2018. So far, there have not been any announcements out […]
U.S. ports reported a record year for cargo volume in 2018. The Port of Los Angeles broke its all-time cargo record for the third time in a row, moving 9,458,749 TEUs (twenty-foot equivalent units the size of a container), a 1.2 percent increase from 2017. The Port of New Orleans reported a new record and a […]
California Steel Industries (CSI) and USS-POSCO Industries (UPI) announced price increases of $40 per ton on Monday, hoping to stem the slide in flat-rolled steel prices that began last summer. The announcements do not include plate. In its Jan. 21 letter to customers, CSI stated that it is opening its order book for flat-rolled orders […]
U.S. Steel and Nucor made their final rebuttals to tariff exclusion requests filed by Evraz NA and California Steel Industries for imports of steel slab. Evraz and CSI maintain that the slabs they require are not readily available in the U.S. Both U.S. Steel and Nucor argue that exclusions would undermine the president’s policy to […]
On the heels of the price hike announced by Nucor yesterday, the other major sheet mills followed suit today raising spot prices on flat rolled steel products by $40 per net ton. Customers were notified of the increase by ArcelorMittal USA, U.S. Steel, California Steel Industries and USS-POSCO Industries. California Steel Industries told customers it […]
California Steel Industries, NLMK and Evraz have filed rebuttals to objections made by U.S. Steel, Nucor and AK Steel to their petitions requesting exclusions for steel slab imports necessary for production. The slab converters charge that domestic mills have misled Commerce in their objections, overstating the current availability of domestic slab and the capacity to […]
Those hoping for the inside scoop on Nucor’s plans to purchase Big River Steel were left to speculate following comments by Nucor Chairman and CEO John Ferriola during Steel Market Update’s steel summit this week in Atlanta. Ferriola neither confirmed nor denied Nucor’s rumored interest in BRS, but his posture suggested it’s a possibility. Nucor […]
The Nucor Sheet Mill Group and USS-POSCO Industries have notified customers of changes in their coating extras as a result of lower zinc prices. The announcements follow on a similar letter to customers from California Steel Industries (CSI) last week. Nucor’s Aug. 30 letter stated: “Consistent with our practice to monitor the cost of zinc, […]
California Steel Industries was the first mill to announce a change to its coating extras this week. Steel Market Update’s comparison of the new rates with the previous rates that took effect one year ago, on Oct. 1, 2017, shows an average reduction of 14.1 percent, with no change in the width/thickness extras. Buyers of […]
NLMK USA sales jumped 15 percent to 640,000 metric tons in second-quarter 2018. Revenue for the U.S. segment totaled $590 million, up 37 percent quarter-over-quarter and 35 percent year-over-year, due to rising demand and recent steel import restrictions. EBITDA for NLMK USA increased 90 percent quarter-over-quarter to $76 million supported by growing sales volume and […]
Lewis Leibowitz, trade attorney and contributor to Steel Market Update, offers the following commentary on the latest developments in Washington: On Wednesday, during a Senate hearing on the Section 232 tariffs, Commerce Secretary Wilbur Ross offered some additional information on the volume of product exclusion requests he has received. As of June 20, there were […]
U.S. steelmakers filed trade cases this week on cold rolled and corrosion resistant (CORE) steels alleging that Korea and Taiwan are guilty of using the same circumvention tactics as the Chinese–namely sending hot rolled and cold rolled substrate to Vietnam. As many predicted, the Commerce Department’s recent Chinese circumvention ruling has set a precedent that […]
Marking a win for U.S. steelmakers, the Commerce Department on Monday officially slapped duties on corrosion-resistant steel (CORE) and certain cold rolled steel products imported from Vietnam that were produced from substrate originating in China. Commerce determined that even though the products underwent some processing in Vietnam, they should still be subject to the same […]
Marking a win for U.S. steelmakers, the Commerce Department on Monday officially slapped duties on corrosion-resistant steel (CORE) and certain cold rolled steel products imported from Vietnam that were produced from substrate originating in China. Commerce determined that even though the products underwent some processing in Vietnam, they should still be subject to the same […]
I spent most of today canvassing the flat rolled and plate steel markets. A portion of the results of my inquiries can be found in our pricing article (indexes) and Tim Triplett’s article entitled, “SMU Q&A: No Signs of a Price ‘Breakout’ Either Way.” Many steel buyers are confused by the lack of clarity in […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: Product Exclusions—The Latest No objections to product exclusions had been posted on the regulations.gov website as of April 29. The BIS regulations require objections to be submitted to BIS within 30 days after a request has been posted. […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: Product Exclusions—The Latest No objections to product exclusions had been posted on the regulations.gov website as of April 29. The BIS regulations require objections to be submitted to BIS within 30 days after a request has been posted. […]
For the ultimate prognosticators out there, individual tax returns were due today (April 17) by midnight. The IRS has had computer issues today and has extended the deadline to April 18 at midnight. The Metals Service Center Institute inventories and shipment article in tonight’s issue will be the last one Steel Market Update will produce. […]
Registrations for the 2018 SMU Steel Summit Conference have blasted through the 300 executives level and we continue to get multiple registrations daily. Here are some of the companies who registered on Monday of this week (those with an asterisk * denote more than one person registered from that company): Ryerson*, Nucor*, California Steel Industries, […]
Steel supply and pricing were the main topics discussed during the March 20 Heating, Air-conditioning, and Refrigeration Distributors International (HARDI) conference call. The Section 232 tariff on steel will go into effect on Friday, March 23, but HARDI members are already seeing an impact in the market. Steel prices are up $6/cwt since the last […]
NLMK USA told Steel Market Update this afternoon that if the 25 percent tariff on steel, and specifically on steel slabs, goes into effect, the future of their company and the people who work for it is in jeopardy long term. Steel Market Update spoke with Bob Miller, President of NLMK USA and Executive Vice […]