Total housing starts in December were at an annual rate of 1,149,000 which was down from 1,179,000 in November. Since April total monthly starts annualized have ranged from 1,062,000 to 1,211,000 with the high month being June. In December the three month moving average (3MMA) was 1,133,000 which was down from 1,153,000 in November. August […]
Steel Dynamics’ struggling recycling segment widened the company’s net loss to $253 million in fourth quarter 2015. It was determined that the book value of the metals recycling segment recorded $435 million in non-cash goodwill and other related asset impairment charge. Excluding the metals recycling charges, adjusted net income was $22 million on net sales […]
AK Steel has intentionally been reducing their exposure to the low-priced spot markets and instead they are looking at the higher end value added products going to automotive and other contract customers. AK Steel results exceeded analyst expectations for fourth quarter. The company reported a net loss of $147.1 million for the fourth quarter of […]
In December, vehicle sales in the US eased from the blistering pace of the previous 3 months. Sales fell from 18.2 million in each of the months September, October and November to 17.3 million in December. All numbers quoted here are seasonally adjusted annual rates. For the full year of 2015, sales were 17.3 million […]
The vast majority of the respondents to our latest flat rolled steel market analysis believe that the domestic steel mills will be able to collect “some” of the latest round of price increases which range from $20 to $30 per ton. In our latest assessment of the flat rolled market, we asked whether the domestic […]
AK Steel kept their press release announcing their new flat rolled steel pricing short and sweet: “West Chester, OH, January 13, 2016—AK Steel (NYSE: AKS) said today that it will increase current spot market base prices for all carbon flat-rolled steel products by $30 per ton, effective immediately with new orders.” Here is what their […]
On Tuesday evening ArcelorMittal advised their customers of their intention to raise carbon flat rolled sheet prices. In an email to their customers the mill advised that they would be raising prices on hot rolled, cold rolled and coated steels (galvanized and Galvalume). The mill told their customers: “Effective immediately with all new quotations, ArcelorMittal […]
US Steel Canada has received court approval to begin again the sales process for Hamilton and Lake Erie Works. US Steel Canada argued in a motion before the court: “With potential SISP bidders showing interest in USSC’s business and with important operational decisions for 2017 needing to be made beginning in the second half of […]
Mill Steel, a distributor of flat rolled carbon steel, has announced the acquisition of certain assets of S&S Steel Services for an undisclosed amount. S&S Steel Services, located in Anderson, Ind., is a supplier of carbon flat-rolled steel services serving manufacturing customers in the Midwest, Mid-South and Mid-Atlantic United States. S&S will continue steel slitting […]
The last couple of days have been hectic as we worked through the articles seen in tonight’s newsletter as well as numerous articles that we are working on various topics. The two headline articles are, of course, the next round of flat rolled price increases. The Nucor $20 hot rolled and $30 cold rolled and […]
Steel Market Update received the following press release from the US Department of Commerce International Trade Administration regarding the release of the preliminary determination for the hot rolled countervailing duty portion of the hot rolled trade case: On January 11, 2016, the Department of Commerce is scheduled to announce its preliminary determinations in the CVD […]
A quick note about December import license data reported as of this evening: Vietnam for December has requested 63,932 net tons of import licenses. Of those 42,114 net tons are cold rolled and 11,787 net tons are galvanized.The average for cold rolled and galvanized exports from Vietnam over the past twelve months was less than […]
Consumer confidence improved from 92.6 in November to 96.5 in December. The very disappointing November result was revised upwards. The three month moving average (3MMA) declined from 98.1 in November to 96.1 in December. As we have reported in earlier write-ups on this subject, 2015 has been tremendously more variable month to month than 2014. […]
In November, vehicle sales in the US maintained their very high seasonally adjusted annual rate of 18.2 million units for the third consecutive month. All the growth this year has been in light trucks which includes crossovers. Sales in November were 6.2 percent higher than the same month a year ago. Year to date sales […]
On Friday, SMU was speaking with the CEO of a Midwest-based service center who was advising us that, in his opinion, based on the conversations he was having with his mill suppliers, we should expect more flat rolled steel price increases to come. The mills were already asking his company for more and the mills’ […]
The UAW has ratified a new contract with Nexteer Automotive after rejecting a first tentative agreement just two weeks ago. The ratification averted another possible strike by the membership. UAW Local 699, representing 3,200 workers at Nexteer, reported that 64.2 percent of voting members supported the new contract. Changes from the original agreement include increasing […]
AK Steel joins other steelmakers in reporting reduced shipment volumes for fourth quarter. In its guidance report, the company says it expects shipments of approximately 1.6 million tons, down 14 percent from Q3. The decrease is a result of reduced sales in the carbon steel spot market due to the adverse impact of pricing from […]
December 16, 2015 – ArcelorMittal today announces that Lou Schorsch, 66, senior executive vice president, member of the Group Management Board and CEO of ArcelorMittal Americas will retire from the company, effective end of February 2016. Mr. Schorsch joined the company in 2003 as CEO of Ispat Inland. Going forward it has been decided to […]
Nucor is expecting weaker financial results in fourth quarter. Operating performance in the steel mill segment was down from third quarter, especially at sheet and bar mills, as lower selling prices outpaced the decline in raw materials pricing. “This performance is due to continued deterioration in global steel markets amplified by global excess capacity and […]
Steel Dynamics expects reduced profitability from its steel operations in fourth quarter compared to third. Lower steel shipments, customer destocking and seasonal demand weakness are impacting the steel platform and, in particular, commodity grade hot roll products. Lower steel pricing will offset any benefits from lower ferrous scrap costs. Fabricated steel joist and decking products […]
AK Steel plans to begin layoffs at its plant in Ashland, Ky., during the week of Christmas. Scott Conley, President of USW Local 1865 said 615 to 620 people will be laid off and everyone should be out of the hot end of the plant by December 31. AK Steel executives blame the layoffs on […]
Layoffs at US Steel Granite City Works are expected to begin December 27, according to reports by USW leaders in the Dec. 10 Bellville News-Democrat. US Steel announced in October that it was considering idling the steel plant in Granite City and issued WARN notices to over 2000 workers. Shortly before Thanksgiving the company confirmed […]
The Nexteer Automotive strike was called off after just one day. A second tentative agreement was reached on Tuesday night, Dec. 8 and workers at UAW Local 699 were told to resume their scheduled shifts. The first tentative contract was rejected by an overwhelming majority of workers at the company which produces steering and driveline […]
I expect the other domestic mills to go along with price increases of their own – whether they choose to announce the move may depend on what they feel is in their best interest. I would anticipate that Nucor will come out with their own announcement. US Steel and ArcelorMittal are in the process of […]
A strike is in effect for 3,200 UAW workers at Nexteer Automotive after 97 percent of the membership voted against a tentative agreement on Sunday. The union and Nexteer exchanged proposals on Monday but could not come to a compromise before the 11:59 p.m. deadline. Nexteer expressed frustration over the decision to strike after negotiating […]
A Delaware judge invalidated a patent by ArcelorMittal in a ruling favoring AK Steel in a dispute that has been ongoing for almost six years. The original suit, filed in January 2010 by ArcelorMittal, claimed that AK Steel’s lightweight, high-strength steel Ultralume, used in automotive applications, violated ArcelorMittal’s 2001 patent (patent 6,296,805—referred to as ‘805) […]
On Friday of this past week Steel Market Update (SMU) adjusted our Price Momentum Indicator from Lower to Neutral. This move is being made as we are seeing more evidence of the domestic steel mills taking a stand and either raising spot prices (especially on coated steels) or refusing to go any lower. As one […]
Ferrous scrap prices are one of the key indicators to watch as the market determines if we have reached the bottom in the slide in flat rolled prices and, if prices will rebound from here. The thought process has been that a move higher in scrap will help change the psychology of the market and […]
The Bureau of Labor Statistics (BLS) analysis of non-farm employment reported on Friday that 211,000 jobs were added in November, which was in line with economist’s consensus expectations. Both September and October were revised up by a total of 38,000. The three month moving (3MMA) of gains through November was 218,000. The unemployment rate, U3, […]
The following article was written by Xavier Boucherat and appeared in the Q4 2015 issue of Automotive Megatrends Magazine and is being reprinted by Steel Market Update with permission. It may be lighter, but aluminium is fundamentally a quick fix, and OEMs currently using aluminium will convert those parts back to steel to reduce mass […]