The following article on the hot rolled coil (HRC) and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Steel – HR futures The Hot Rolled futures market this past week has been characterized by limited trading activity. There have been numerous […]
US auto sales were at their highest seasonally adjusted annual rate of the year. However, Ward Auto’s SAAR estimate of 17.9 million marked the third month that the SAAR declined year-over-year. The October 2015 rate was 18.1 million. The year-to-date SAAR was 17.3 million, unchanged from the 10 month total in 2015, according to Wards, […]
US Steel reported third quarter net earnings of $51 million compared to a Q2 loss of $46 million and Q3 2015 net loss of $173 million. Net sales in third quarter increased to $2.7 billion, with $114 million in sales coming from the flat-rolled segment and $81 million from US Steel Europe. Sales benefited from […]
Cliffs Natural Resources reported iron ore pellet sales volume in third quarter was 5.3 million long tons compared to 5.6 million long tons in 2015. Production was also down at 3.86 million long tons compared to 4 million long tons the year before. The decrease was attributed to customer inventory mix that was partly offset […]
AK Steel’s efforts to focus on higher value products, cut costs and reduce exposure to commodity products has resulted in a net income of $50.9 million and the company’s best third quarter since 2008. Adjusted EBITDA margins improved to 10.8 percent from 7 percent a year ago. “De-emphasizing commodity products and introducing new products, such […]
One of our key Asian steel and commodity trading sources has provided SMU with details about the Chinese steel markets as well as what is happening in Asia,including comments about the circumvention suit which involves Vietnam: Export offers from China have basically risen by USD20/mt in the past two weeks, and it has become a […]
Steel Dynamics reported higher flat rolled prices resulted in an 11 percent increase in earnings in the third quarter. Net earnings were $284 million on net sales of $2.1 billion. Adjusted net income, including a $5 million litigation settlement charge, was $157 million for the quarter. SDI steel production was at 85 percent capacity in […]
Nucor Corporation reported net earnings of $270 million for third quarter, up from 233.8 million in Q2 and 227.1 in Q3 2015. Consolidated net sales in third quarter increased 1 percent to $4.29 billion from the previous quarter and 2 percent from a year ago. Average sales price per ton increased 11 percent QoQ. Tons […]
Reliance Steel & Aluminum reported sales of $2.19 billion, down 0.8 percent from Q2 and down 4.4 percent from Q3 2015. Tons sold were down 4.9 percent from the previous quarter to 1,445,500 tons with average selling price per ton up 4.4 percent, sequentially. Reliance was able to maintain during most of the quarter the […]
US Steel Canada court monitor Alex Morrison reported sales were good in August, resulting in revenue of CAD $144.6 million. EBITDA increased by $30.7 million from July. Shipments were up 19.7 percent year-over-year to 192,734 tons. The company has been successful in replacing sales to automotive customers that were lost when US Steel cut ties […]
The conversation has begun regarding when flat rolled steel prices will end their slide and reverse course. Flat rolled steel prices have been in a steep decline since mid-June 2016 when benchmark hot rolled prices peaked at $635 per ton ($31.75/cwt, SMU index average) FOB domestic mill. Since then steel prices have retreated $145 per […]
In David Feldstein’s article on the HRC Futures market he correctly points out one of the factors that steel buyers need to watch closely is the value of the dollar against the currency of the international steel trading nations. As the dollar increases in value those wanting to ship steel here also increases. As the […]
The World Steel Association (worldsteel) released its Short Range Outlook for 2016 and 2017. According to the new report, global steel demand will increase by 0.2 percent to 1,501 million tonnes in 2016. Steel demand contracted by 3.0 percent in 2015. The 2017 forecast is for global steel demand to grow 0.5 percent to 1,510 […]
WardsAuto reports total volume for U.S. light vehicle sales in September was 1.428 million units, down 0.7 percent from a year ago. The seasonally adjusted annual rate for September rebounded to 17.7 million units from August’s total of 16.9 million, but was below the 18 million mark reached in September 2015. Most automotive manufacturers reported […]
Worthington Industries delivered record earnings in the first quarter of FY 2017 (ending August 31, 2016). Net sales totaled $737.5 million for net earnings of $65.6 million. Gross margin increased $34.3 million year-over-year to $147.3 million primarily due to inventory holding gains of $17 million in Steel Processing which were partly offset by lower volume […]
On Thursday, September 22, 2016 four steel mills: ArcelorMittal USA, Nucor, AK Steel and US Steel submitted petitions asking the US Department of Commerce to review imports of cold rolled and corrosion resistant steels (galvanized and Galvalume) arriving in the United States from Vietnam as actually being a way for China to circumvent antidumping and […]
Vehicles sales in the US are settling in to a more sustainable pace, but a strengthening labor market, low interest rates, low gasoline prices, and rising incentives are still supportive of strong demand. Moody’s Analytics expects the pace of light vehicle sales to be above a seasonally adjusted annual rate (SAAR) of 17 million units […]
It’s official! On Sunday we reported rumored plans of an expansion at Nucor Steel Arkansas and this afternoon the company made a formal announcement. Nucor’s press release follows: Nucor Corp. announced that it is adding an additional cold mill at its Nucor Steel Arkansas division. The specialty cold mill complex will expand Nucor’s capability to […]
Steel Dynamics expects stronger profits in third quarter due to meaningful metal spread expansion. In the company’s third quarter guidance, SDI said higher steel pricing in Q3 will more than offset higher scrap prices, however, improved margins will be impacted by lower steel shipments across the product platform. Higher earnings for third quarter are driven […]
Nucor Steel Arkansas is planning a $230 million expansion at its Blytheville steel plant according to the Blytheville Courier News. Nucor Controller Mark DiGirolamo addressed the Blytheville City Council’s Finance and Purchasing Committee on Wednesday to seek a bond from the city to finance construction of a cold mill at the plant. According to the […]
Nucor expects higher earnings in third quarter compared to second quarter due to improved performance at its raw materials division and steel mills. In its third quarter guidance, Nucor said higher average selling prices that have benefited in part from contract sales priced on a lagging quarterly basis would improve profitability of the company’s sheet […]
The uncertainty in the market (called the “blahs” by a number of our steel sources) is affecting both buyers and sellers of steel. Steel mills have been doing all that they can in an attempt to keep flat rolled steel prices from slipping too far. One of our mill sources had a sense of humor […]
The duties on automotive steel from Korea due to antidumping (AD) may affect pricing of vehicles at Hyundai and Kia here in the U.S. Dumping and countervailing duties have been determined by the Department of Commerce on imports of Korean coated, hot-rolled, and cold-rolled steel. Hyundai Steel, part of Hyundai Group, exports approximately 545,000 tons […]
This month as we contemplate the August job creation performance we will lead off with the thoughts of J.G. Collins managing director of the Stuyvesant Square Consultancy. On September 2nd he wrote: The August jobs report released this morning was full of disappointment, with just 151,000 jobs created. Higher wage occupations continued to shed jobs […]
The SMU Steel Buyers Sentiment Index has been showing signs of a rebound as our Current Index is being released as +63 this week. This is a +2 point improvement from the middle of August and +5 point improvement since the beginning of August. However, SMU prefers to look at our Current and Future Sentiment […]
U.S. automotive sales took a 4.1 percent dip in August as demand softened after record breaking sales in 2015. Sales totaled 1.506 million vehicles last month, according to final tally by Wards Auto. The seasonally adjusted annual rate fell short of expectations at 16.9 million, well below July’s SAAR of 17.8 million and the August […]
Canadian autoworkers selected General Motors as target company as contract negotiations begin for approximately 23,000 union workers Unifor, which represents autoworkers at GM, Ford, and Fiat Chrysler NV in Canada, will use negotiations with GM to set the pattern for talks with the other two manufacturers. Jerry Dias, president of Unifor, called General Motors the […]
Light vehicle (LV) sales bounced back to a seasonally adjusted annual rate (SAAR) of 17.9 million units in July from 16.7 million in June (Figure 1). July was the best month since November last year. Autos rose from 6.8 to 7.1 million and light trucks rose from 9.9 to 10.8 million. The mix in July […]
West Chester, OH, August 22, 2016—AK Steel (NYSE: AKS) announced today it is launching NEXMET™, an innovative family of high strength steels for use in automotive lightweighting applications. These products are specifically designed to assist automotive original equipment manufacturers (OEMs) in meeting 2025 U.S. Corporate Average Fuel Economy (CAFE) targets. AK Steel’s NEXMET family of […]
As I wander around the industry talking to buyers and sellers of steel I am always asking and listening for the signs of change. These are “warnings” to my ears and I heard one earlier today that needs to be pursued further and I think we will have the opportunity to do so at our […]