All the laid off auto workers were back on the job at the beginning of November following the GM strike and restarts at the auto plans reportedly went smoothly. This analysis is based on data from LMC Automotive for automotive assemblies in the U.S., Canada and Mexico. The breakdown of assemblies is “Personal” (cars for […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: Last week was one of the most eventful for trade this year: USMCA Agreement Editor’s note: The House voted to pass the USMCA earlier today. The Senate is unlikely to vote on the measure before completion of the […]
By CRU Prices Analyst George Pearson, from the CRU Steel Sheet Products Monitor Sheet prices in the U.S. were mixed this week. HR coil at $555 was steady w/w, falling by $2 /s.ton, while CR and HDG coil products gained $26-30 /s.ton w/w after steadying last week. For HR coil, overall volume has picked back […]
By CRU North America Senior Analyst Ryan McKinley, from CRU’s Steel Metallics Monitor The CRU metallics price indicator (CRUmpi) rose by 7.9 percent m/m to 211.1 (see chart) following price increases in nearly every market. Pervasive market tightness caused by adverse weather and higher domestic demand in major exporting markets forced buyers in import-reliant markets to accept higher […]
The popular press often gets overly excited or depressed by a single month’s employment report, but November really was an exceptional month. Net job creation in November increased to 266,000 following upwardly revised results for September and October. September was revised up by 13,000 and October by 28,000. Rising employment and wages are the main […]
Samuel Associated Tube Group announced it will invest $29 million to build a new manufacturing facility in Jefferson County, Ala. Samuel Associated Tube, a division of Canada’s Samuel, Son & Co., is a manufacturer of small-diameter, electric-resistance-welded and fabricated carbon tubing. The new warehouse will total 284,000 square feet and is expected to be operational […]
Total light vehicle sales are likely to reach 17.1 million units this year, down 1.4 percent from 2018 and above 17 million for the fifth straight year, says J.D. Power and LMC Automotive. As usual, sales were strongest for SUVs and trucks. U.S. auto sales rose for most foreign automakers during November. Toyota sales increased […]
The United Auto Workers and Fiat Chrysler Automotive reached a tentative labor agreement over the holiday weekend. The four-year agreement includes $9 billion of investments by the company that will add 7,900 jobs during the contract period, said the UAW in a press statement. Other terms of the contract are confidential until members are informed. […]
Irrespective of the GM strike, light vehicle assemblies in North America slowed through October. This report is based on data from LMC Automotive for automotive assemblies in the U.S., Canada and Mexico. The breakdown of assemblies is “Personal” (cars for personal use) and “Commercial” (light vehicles less than 6.0 tonnes gross vehicle weight rating). Heavy […]
The slowdown in the energy sector has resulted in the closing of a nearly 50-year-old plant. TimkenSteel, headquartered in Canton, Ohio, announced it will close its TimkenSteel Material Services facility in Houston. “We are focusing on our core strengths of making and heat treating steel and more fully utilizing our supply chain to provide the […]
Metalforming companies reported continued weakness in the market in the latest survey by the Precision Metalforming Association. The PMA November 2019 Business Conditions Report showed 34 percent of participants expect a decline in economic activity and 51 percent expect no change. “The November PMA Business Conditions Report showed little change from the previous month. Metalforming […]
So, tonight I thought I would write about a couple of text messages that I received over the past 24 hours. Both messages have to do with steel prices, just looking at information out of SMU and other publications or indices differently. The first message was from the president of a Midwest-based service center. They […]
United Auto Workers have ratified a new four-year contract with Ford with the approval by 56.3 percent of union members. The new contract includes a $9,000 signing bonus for full-time workers, performance bonuses, two 3 percent annual raises and two 4 percent lump sum payments. Health care costs remain unchanged. “Every Ford employee and temporary […]
Change and growth, both personal and professional, were the dominant topics at the 2019 Annual Conference of the Association of Women in the Metal Industries, held in San Antonio Nov. 6-9. Beginning with a workshop by Asbury Group CEO Kailei Carr—”Unveil Your Most Powerful Self”—and ending with Anne Phelon, CEO at Merrett Davies International—”Moving from […]
ArcelorMittal reported a third-quarter net loss of $539 million—its second quarterly loss in a row as the global steel and mining company faced lower shipments and weak steel prices in markets all over the world. “As anticipated, we continued to face tough market conditions in the third quarter, characterized by low steel prices coupled with […]
By CRU Principal Analyst Chris Asgill There has been a marked rise in Chinese imports of pig iron and HBI this year. This has been primarily due to limited domestic scrap supply that cannot be offset by external supply due to restrictions in scrap imports. Limited scrap supply relative to demand has meant that scrap prices in […]
The last few weeks have been busy ones for the U.S. auto industry. A 40-day strike by the United Auto Workers at General Motors ended with ratification of a new four-year labor agreement, allowing negotiations to move forward at Ford. Ford negotiations wrapped up in just three days with a tentative agreement now ready to […]
Steel prices continued their decline in October to an average hot rolled price below $500 per ton, prompting a $40 per ton price increase announcement by the flat rolled mills late in the month. With a price change in play, Steel Market Update switched its Price Momentum Indicator to Neutral. Widespread concerns about the declining […]
The Institute for Supply Management’s Manufacturing PMI remained in contraction in October with a reading of 48.3, the third month of contraction, indicating continued softening in the manufacturing sector. The October reading was an increase of 0.5 percentage points from September. Nine of the ten components of the index registered below the neutral point of […]
AK Steel eked out a net income of $2.8 million in the third quarter, down from $66.8 million in Q2 and $67.2 million in Q3 2018. Included in net income was a $15.3 million mark-to-market loss from iron ore derivatives. Net sales of $1.5 billion fell 12 percent year-over-year and 9 percent from the second […]
By CRU Chief Economist Jumana Saleheen We expect world GDP to grow by 2.5 percent this year and next; in other words, we expect global growth to be broadly stable at current rates. The story for world industrial production, instead, is one of a mild recovery from 1.4 percent in 2019 to 2.2 percent in […]
Nucor Steel Arkansas opened its new cold mill complex at a ribbon-cutting ceremony on Friday, Oct. 25. The $230 million specialty cold mill will expand Nucor’s capability to produce high strength, high-strength low-alloy and motor lamination steel products for the automotive industry. “As a world leader in steel manufacturing technology, Nucor is particularly focused on […]
United Auto Workers have moved on to negotiations with Ford now that a new labor agreement has been approved at General Motors. Preliminary negotiations have been ongoing since July 15, but talks have now ramped up as the UAW-Ford team puts together a final contract for the 55,000 Ford union workers. Rory Gamble, UAW-Ford vice […]
John Packard is traveling… While it’s too early to tell how the market will fully react to last week’s price increase announcements by the flat rolled mills, change is clearly afoot, based on the findings from SMU’s canvass of the market over the past two days. How high will prices go, and for how long? […]
By CRU Economic Analyst Ippolito Tarabini and Chief Economist Jumana Saleheen World industrial production growth halved in 2019H1 to 1.5 percent from 3 percent in 2018, suffering because of a slowdown in China, the widespread downturn in the automotive sector, and the unpredictable trade negotiations between the U.S. and the rest of the world, particularly […]
Reliance Steel & Aluminum Co. did better than anticipated in the third quarter, generating net sales of $2.69 billion. Shipments were higher than expected due to strength in Reliance’s largest segment, nonresidential construction, slipping just 2 percent compared to a typical seasonal decline of 4-6 percent. Demand for carbon structural and tubing products helped boost […]
SSAB Americas saw its third-quarter profits decrease to $54.5 million from $82.2 million in Q3 2018 due to lower plate steel prices. Sales were down 2 percent from the second quarter to $490 million and 6 percent from a year ago. Demand during the quarter was relatively stable with shipments of 521,000 metric tons, up […]
Total North American light vehicle assemblies were down by 3.0 percent year over year in three months through August. This report is based on data from LMC Automotive for automotive assemblies in the U.S., Canada and Mexico. The breakdown of assemblies is “Personal” (cars for personal use) and “Commercial” (light vehicles less than 6.0 tonnes […]
Steel price volatility was persistent in 2019, said CRU Principal Analyst Josh Spoores at the FMA/ASD Executive Networking Series held in Pittsburgh last week. U.S. economic growth was below the historical trend throughout 2019, but has improved since April, according to the Chicago Fed National Activity Index. Activity in two key steel sectors, fabricated metal products and […]
Nucor reported a decline in financial results as expected for the third quarter of 2019. Net earnings were $275 million, down from $386.4 million in Q2 and $676.7 million in Q3 2018. Consolidated net sales fell 7 percent from the previous quarter to $5.46 billion. Steel shipments to outside customers declined 7 percent from last […]