Steel Dynamics Inc. reported that fourth-quarter 2020 earnings will be significantly higher than third quarter, driven by flat roll metal spreads and steady steel shipments. Average steel prices for the quarter are expected to offset increased scrap costs. Demand remains good, particularly in automotive and construction. “Strong demand coupled with historically low steel inventories throughout […]
Worthington Industries reported net sales of $731.1 million and a net loss of $74 million for the second quarter of its fiscal 2021 ended Nov. 30 after accounting for nearly $150 million in pre-tax loss related to its investment in Nikola Corp. and $11.4 million in impairment and restructuring charges. In comparison, sales were $826.6 […]
Let’s play “fun facts.” Last week Steel Market Update published our average hot rolled spot price as $885 per ton ($44.25/cwt). With the domestic steel mills asking $900-$960 per ton for new orders of spot (if they are offering at all, which is a separate issue all by itself) SMU expects HRC spot prices to […]
Let’s play “fun facts.” Last week Steel Market Update published our average hot rolled steel spot price as $885 per ton ($44.25/cwt). With the domestic steel mills asking $900-$960 per ton for new orders of spot (if they are offering at all, which is a separate issue all by itself) SMU expects HRC spot prices […]
Cleveland-Cliffs has finalized the acquisition of ArcelorMittal USA and its subsidiaries, creating the largest flat-rolled steel producer in North America. As agreed, ArcelorMittal received $505 million in cash and 78 million shares of Cleveland-Cliffs common and non-voting preferred stock, redeemable for 58 million shares of common stock or equivalent cash. In return, Cleveland-Cliffs assumes all […]
U.S. Steel has acquired the remaining 50.1 percent stake in the Big River Steel mill in Osceola, Ark., paying $774 million in cash, giving it full ownership of one of the most advanced flat-rolled minimills in the United States. U.S. Steel paid $700 million for a 49.9 percent share in BRS in 2019, making its […]
By CRU Principal Analyst Josh Spoores, from CRU’s Steel Sheet Products Monitor U.S. Steel announced the full buyout of Big River Steel this week, while Cleveland-Cliffs closed on its acquisition of ArcelorMittal’s U.S. assets. In any other week, these headlines would drive the news flow for steel buyers and sellers. However, news this week remains […]
U.S. auto sales slowed in November, dipping to a seasonally adjusted annual pace of 15.55 million units from 16.21 million in October, says Wards Intelligence. The decline was attributed primarily to three fewer selling days and one less weekend during the month. “November 2020 is a prime example of why accounting for selling day differences […]
Editor’s note: SMU Contributor David Feldstein is president of Rock Trading Advisors. David has over 20 years of trading experience in financial markets and has been active in the ferrous futures space for over eight years. You can learn more at www.thefeldstein.com or add him on twitter @TheFeldstein and on Instragram at #thefeldstein. It now […]
Much has changed since Flack Global Metals announced its plan a year ago to build a new painting and processing center adjacent to Big River Steel in Osceola, Ark. Minority shareholder U.S. Steel plans to buy the rest of BRS. Competitor Nucor got into the prepaint business with its purchase of Precoat Metals’ nearby Armorel, […]
The thought of a possible steel shortage gained new ground this past week as news of spreading coronavirus infections at ArcelorMittal Burns Harbor, the breakout at the No. 2 caster at Dofasco, the slow return of production at Stelco due to a hack of their computer systems, and the continued strike at the NLMK USA […]
Australian steel producer BlueScope has revised its forecast for the first half of FY 2021 due to improved operations at all its segments and the sale of property in the U.S. Earnings before interest and taxes are expected to increase to AUD 475 million ($345 million U.S.) compared to the October forecast of AUD 340 […]
You may be thinking about participating in one of our upcoming Steel 101: Introduction to Steel Making & Market Fundamentals Workshops, but wonder what it’s like to learn virtually. If you have school age kids, you already know that so many of us have adapted to online learning. Here at SMU, we’ve had to pivot from our live and in […]
U.S. auto sales closed October at a strong pace with year-over-year growth supporting the industry’s robust recovery. The seasonally adjusted annual rate for October was near 16.4 million, said Cox Automotive, and marked the second consecutive month of annual increase. Year-to-date sales are down less than 10 percent compared to 2019. Said Brian Finkelmeyer, Cox […]
Global steelmaker ArcelorMittal narrowed its net loss to $300 million in the third quarter, an improvement on the loss of $600 million in Q2, as sales increased 20.9 percent to $13.3 billion due to higher steel shipments and a better sales mix. Worldwide shipments for the quarter totaled 17.5 million metric tons, a 17.5 percent […]
By CRU Principal Analyst James Campbell, from CRU’s Long Products Monitor Most long product prices around the world increased this month as the recovery in demand continues. For some markets and products, the increase in supply has been outpaced by demand. Wire rod remains the strongest product right now as the increase in construction activity […]
By Principal Consultant Josh Spoores, from CRU’s Steel Sheet Products Monitor North American sheet prices have continued to surge after bottoming this past August. For HR coil, prices have been assessed at $712 /s.ton. Since Aug. 12, these prices have gained $237 /s.ton, or 63%. This is the fastest percent gain over three months in […]
By CRU Principal Analyst Josh Spoores, from CRU’s Steel Sheet Products Monitor The global sheet market has seen a few key trends emerge across a variety of regions. First, demand has continued to rise from the pandemic-related lows recorded earlier this year. While sheet demand continues to be driven by sequential increases in automotive demand, […]
By CRU Principal Analyst Josh Spoores and Senior Analyst Ryan McKinley, from CRU’s Steel Monitor Strong underlying demand continues to provide substantial support to finished steel prices in the USA. Sheet prices have risen at their quickest pace since CRU started tracking them and, while there was little change m/m for long products, mills have […]
By CRU Principal Analyst Josh Spoores and Senior Analyst Ryan McKinley, from CRU’s Steel Monitor Strong underlying demand continues to provide substantial support to finished steel prices in the USA. Sheet prices have risen at their quickest pace since CRU started tracking them and, while there was little change m/m for long products, mills have […]
By CRU Principal Analyst James Campbell, from CRU’s Global Steel Trade Service The recent acceleration in news of a pre-approved vaccine has led us to bring forward the economic recovery to the first half of 2021. Confidence has returned and spending is resuming. An earlier-than-expected vaccine provides upside risks to our automotive and construction outlook. […]
By CRU Chief Economist Jumana Saleheen and Principal Economist Alex Tuckett, from CRU’s Steel Monitor In this Global Economic Outlook, we look ahead to 2021 and outline our top ten calls for the global economy. These include predictions on Covid-19 vaccines, world growth, the auto and construction sectors, the U.S. dollar, monetary and fiscal policy, […]
Ryerson Holding Corp. reported incremental improvement in third-quarter 2020. Ryerson’s Q3 revenue increased 7.7 percent to $832 million, but the service center company posted a net loss of $39.9 million, which included a $52 million charge related to pension liabilities and 17.1 million in expenses related to the refinance of 2022 notes. Adjusted net income was […]
Canadian steel processor Nova Steel plans to open a new tube manufacturing plant in Bowling Green, Ky. The $70 million project was announced Thursday and includes an initial investment of more than $20 million for the acquisition of a 108,000-square-foot building in the Kentucky Transpark and the purchase and installation of equipment. The plant will […]
U.S. Steel narrowed its loss to $234 million in the third quarter from a net loss of $589 million in the second quarter. Net sales increased to $2.34 billion from $2.09 billion. “Our third-quarter results exceeded our guidance and demonstrated the power of the actions we have taken since the onset of COVID-19 with dramatically […]
When I look at the results of our flat rolled survey, sometimes I have to scratch my head. In the survey we just completed last week, we asked at what point hot rolled prices would peak. Sixty-two percent of our respondents believe prices will peak at $700 or lower. To them I ask, what is […]
Ferrous scrap prices are expected to trade significantly higher again in January on strong demand from mills both domestic and foreign, report Steel Market Update sources. Scrap jumped by more than $70/GT in December and the uptrend is likely to continue into the new year, lending further support to higher finished steel prices. “Like many […]
Following big jumps in December and January, ferrous scrap prices are expected to moderate in February. Steel Market Update sources predict obsolete grades could drop by $30-50/GT and prime grades by $10-20/GT due primarily to the large amount of scrap offered to the mills in January and the weakening export market. “Scrap dealers are lowering […]
Ferrous scrap prices are expected to rise anywhere from $40-70/GT in March after declines in February, lending further support to higher finished steel prices. Scrap prices are likely rise in March by at least as much as they fell in February, said CRU Senior Analyst Ryan McKinley. “The cold snap over the last few weeks […]
Orders for durable goods increased for the fifth straight month, up 1.9 percent to $237.1 billion and surpassing expectations. Transportation orders led the increase with a 4.1 percent gain. Automotive orders rose 1.5 percent in September on continued strong sales for SUV’s and light trucks. The commercial airline industry, showing losses through the pandemic, had […]