AISI: WASHINGTON, D.C. – American Iron and Steel Institute (AISI) President and CEO Thomas J. Gibson today urged President Obama to “fight for manufacturing and for steel” during the U.S. visit of Chinese President Xi Jinping this week. Gibson said his group wholeheartedly supports the positions outlined in letters sent this week to the Administration […]
WASHINGTON, D.C., September 24, 2015 – The Steel Market Development Institute (SMDI), a business unit of the American Iron and Steel Institute (AISI), has launched a new website that focuses on using steel for building construction. The new site, located at www.buildusingsteel.org, provides information for engineers, architects, owners, building contractors, code officials and other construction […]
The legalese can be brain numbing when reviewing the documents involved with the various steel trade suits. However, large manufacturing companies have their attorneys go through the petitions and review the specific language in order to recognize when changes are made in order to protect themselves from surprises. If your company has not done so […]
This report compares domestic mill shipments and total supply to the market. It quantifies market direction by product and enables a side by side comparison showing the degree to which imports have absorbed demand. Sources are the American Iron and Steel Institute and the Department of Commerce with analysis by SMU. Table 1 shows both […]
According to the latest data released from the US Department of Commerce and the American Iron and Steel Institute, apparent steel supply for the month of June 2015 was 9,373,498 net tons. Apparent steel supply is calculated by adding domestic steel shipments and finished US steel imports and subtracting total US steel exports. June supply […]
This report compares domestic mill shipments and total supply to the market. It quantifies market direction by product and enables a side by side comparison showing the degree to which imports have absorbed demand. Sources are the American Iron and Steel Institute and the Department of Commerce with analysis by SMU. Table 1 shows both […]
The Steel Market Development Institute (SMDI), a business unit of the American Iron and Steel Institute (AISI), today announced Rick Blume, vice president, commercial, Nucor Corporation, will succeed Dan Mull, executive vice president, sales and marketing, ArcelorMittal USA, as chairman of SMDI’s Board of Directors. “We look forward to working under Rick’s leadership to further […]
China made a surprise devaluation of its currency today to bolster its faltering economy. The 2 percent devaluation of the yuan will make imports to China more expensive but will make exports more attractive to international traders. The American Iron and Steel Institute (AISI) issued a statement today concerning today’s currency move by the Chinese […]
The U.S. International Trade Commission voted today to continue their investigation of coated products (corrosion-resistant) which are primarily focused on hot dipped galvanized and Galvalume steels from China, India, Taiwan, South Korea and Italy. It was a foregone conclusion that the ITC would find enough of a threat for “material injury” to continue the investigation. […]
This report compares domestic mill shipments and total supply to the market. It quantifies market direction by product and enables a side by side comparison showing the degree to which imports have absorbed demand. Sources are the American Iron and Steel Institute and the Department of Commerce with analysis by SMU. Table 1 shows both […]
According to the latest data released from the US Department of Commerce and the American Iron and Steel Institute, apparent steel supply for the month of May 2015 was 9,069,541 net tons. Apparent steel supply is calculated by adding domestic steel shipments and finished US steel imports and subtracting total US steel exports. May supply […]
The big picture is as follows: from the 2015 Article IV Consultation with the United States of America Concluding Statement of the IMF Mission May 28, 2015 (heavily abridged by SMU). “At current levels of the real exchange rate, the U.S. dollar is assessed to be moderately overvalued. As a result, the current account deficit […]
Steel Market Update has been asked a number of times to define, or help our readers to understand, what is “injury” when it comes to the domestic steel industry. Last week we heard from trade attorney Larry Friedman at the Association of Steel Distributors Meeting in Chicago that injury was losing sales, the lowering of […]
There has been some confusion over the customs bill that was passed by the House last week. The bill, HR 644 – Trade Facilitation and Trade Enforcement Act of 2015, was not part of the TAA/TPA package (HR 1314). Passage of the House bill will send it to committee where it will be reconciled with […]
The Trade Promotion Authority (TPA) “fast track” was passed by the House in a 219-211 vote on Friday. The Trade Adjustment Act (TAA), however, suffered a crushing defeat in a 126 to 302 vote. TAA would extend a program providing assistance to workers who lose their jobs as a consequence of trade deals and add […]
This report compares domestic mill shipments and total supply to the market to enable a side by side comparison and the degree to which imports have absorbed demand. Sources are the American Iron and Steel Institute and the Department of Commerce with analysis by SMU. Table 1 shows both supply and mill shipments of sheet […]
According to the latest data released from the US Department of Commerce and the American Iron and Steel Institute, apparent steel supply for the month of April 2015 was 9,212,032 net tons. Apparent steel supply is calculated by adding domestic steel shipments and finished US steel imports and subtracting total US steel exports. April supply […]
The International Monetary Fund says the China’s currency is “no longer undervalued” after being labeled “modestly undervalued” for the past several years. According to a Tuesday statement by IMF, “While undervaluation of the renminbi was a major factor causing the large imbalances in the past, our assessment now is that the substantial real effective appreciation […]
The piece below was published to our Premium level members earlier this week, but we would like to share it with our Executive level members as an example of what our Premium members have access to. This report goes into much more depth than our Apparent Steel Supply article published last Thursday. If you are […]
This report compares domestic mill shipments and total supply to the market to enable a side by side comparison and the degree to which imports have absorbed demand. Sources are the American Iron and Steel Institute and the Department of Commerce with analysis by SMU. Table 1 shows both supply and mill shipments of sheet […]
According to the latest data released from the US Department of Commerce and the American Iron and Steel Institute, apparent steel supply for the month of March 2015 is 9,575,903 net tons. Apparent steel supply is calculated by adding domestic steel shipments and finished US steel imports and subtracting total US steel exports. March supply […]
The Trade Promotion Authority bill S.995, or “fast track bill” as it being called, passed the Senate Finance Committee last week by a vote of 20-6. The fast track portion gives the President the authority and guidelines to negotiate trade deals in exchange for a vote by Congress passing resulting trade agreements without amendment. The […]
US Steel announced another round of production adjustment cuts that affect the company’s tubular operations. Notice of potential layoffs were issued to 1,404 employees on Friday, April 17. The latest round of notifications impact 404 management employees in Houston and other U.S. Steel tubular operations, 579 employees at Lone Star Tubular, 166 at Offshore Operations […]
The following article is was provided to our Premium customers on Friday afternoon, and we felt it would be a good article to share with our Executive members as an example of what a Premium level membership has to offer. We also published Imports by Product, Port, and Country and our Market Survey Results to […]
This report compares domestic mill shipments and total supply to the market to enable a side by side comparison and the degree to which imports have absorbed demand. Sources are the American Iron and Steel Institute and the Department of Commerce with analysis by SMU. Table 1 shows both supply and mill shipments of sheet […]
According to the latest data released from the US Department of Commerce and the American Iron and Steel Institute, apparent steel supply for the month of February 2015 is 8,968,831 net tons. Apparent steel supply is calculated by adding domestic steel shipments and finished US steel imports and subtracting total US steel exports. February supply […]
Three steel industry executives met in Washington D.C. on Thursday at the Congressional Steel Caucus to discuss state of the US steel industry and the impact unfairly traded imports have had on jobs and manufacturing. Revisions to the “material injury” standards were proposed to add language that clearly defines indicators of injury and allows relief […]
The following article is usually available to our Premium level members only. This report compares domestic mill shipments and total supply to the market in one single report to enable a side by side comparison and the degree to which imports have absorbed demand. Sources are the American Iron and Steel Institute and the Department […]
Last month we began to report on domestic mill shipments and total supply to the market in one single report to be able to compare side by side demand and the degree to which imports have absorbed that demand. Sources are the American Iron and Steel Institute and the Department of Commerce with analysis by […]
The United States Senate passed the Keystone XL oil pipeline bill by a vote of 62-36 on Thursday, Jan. 29. Nine Democrats joined the Republican-controlled Senate in supporting the bill. The House is expected to vote on the Senate version of the bill early next week. The Keystone XL legislation includes two energy-efficiency programs that […]