AISI: Raw steel production slips to 5-month low
Domestic raw steel production tumbled last week to the lowest rate seen in five-months, according to the latest release by the American Iron and Steel Institute (AISI).
Domestic raw steel production tumbled last week to the lowest rate seen in five-months, according to the latest release by the American Iron and Steel Institute (AISI).
Domestic steel shipments increased in May month over month but have fallen on-year.
A record 60.6 million people are expected to travel by car for the Fourth of July holiday, according to the American Automobile Association (AAA). And a recent survey by The Vacationer said 75% of Americans intend to take at least one road trip this summer. In short, Americans are hitting the road this season and probably crossing a short-span steel bridge on their travels.
Domestic raw steel production inched up again last week to reach a four-week high, according to the latest release by the American Iron and Steel Institute (AISI).
The Congressional Steel Caucus have expressed concern regarding the US government’s potential trade status change for Vietnam.
Domestic raw steel production ticked up last week following a seven-week low, according to the latest release by the American Iron and Steel Institute (AISI).
Domestic raw steel production fell to a seven-week low last week, according to the latest release by the American Iron and Steel Institute (AISI).
The conventional wisdom is that sheet prices will trend down for the next few weeks (maybe the next two months) before rising again in August – around when lead times stretch into the busier fall months. We see that reflected in our survey results and in market chatter. And there are plenty of data points to choose from if you want to support of that position.
The amount of finished steel available to the US market rose 1% from March to April, according to SMU calculations on Department of Commerce and the American Iron and Steel Institute (AISI) data.
Sometimes, words can lead you in interesting directions. Specifically, crosswords. For the last six weeks we have been making steel-themed crosswords in the lead-up to SMU's Steel 101 course in Fort Wayne, Ind., which is taking place today and tomorrow. I’ve learned snippets of steel history and educated myself on the finer points of sponge iron.
Domestic raw steel production eased last week, falling from an eight-week high down to a four-week low, according to the latest release by the American Iron and Steel Institute (AISI).
Now that June has arrived, the official countdown until SMU’s Steel Summit 2024 – North America’s premier flat-rolled steel conference – has begun. If you haven’t already registered, don’t delay. More than 700 attendees from more than 300 companies have already registered to be in Atlanta this August. In short, it’s poised to be another […]
Domestic steel shipments ticked up month over month (m/m) in April but were down year over year.
Raw steel production in the US moved higher for a fifth straight week, the American Iron and Steel Institute (AISI) reported on Monday. AISI said US mills, operating at 78.5% of capabilities, produced an estimated 1,743,000 short tons (st) of raw steel in the week ended June 1. This was a 0.5% rise from the […]
We’re just a few months away from SMU’s Steel Summit 2024 – North America’s premier flat-rolled steel conference.
Raw steel production in the US inched higher for a fourth consecutive week, the American Iron and Steel Institute (AISI) reported on Tuesday.
Domestic raw steel production continued to ramp up through last week, now up to a six-week high according to the latest release by the American Iron and Steel Institute (AISI).
Sometimes even in a bit of chaos there is complacency. And it seems that since March 2020, “a bit of chaos” has been the order of the day. That means in the world at large, and in steel specifically.
The USMCA should be strong enough to handle trade disagreements on steel between the US and Mexico, according to the American Iron and Steel Institute’s (AISI’s) Kevin Dempsey.
SMU had the pleasure of attending the American Iron and Steel Institute's (AISI's) annual general meeting in Washington this week. It was a slow week in our nation's capital, so we were able to take a leisurely stroll around the National Mall and take in the sights. Just kidding. In fact, the meeting coincided with significant trade actions announced by the Biden administration. It included, among other things, additional tariffs on Chinese steel and aluminum.
Cleveland-Cliffs’ Lourenco Goncalves thinks trade measures announced by the US government on Tuesday against China were just the opening salvo in a series of trade actions. Case in point: The Biden administration targeted China’s “unfair” trade policies with additional tariffs on an array of Chinese-made goods - including steel, aluminum, and EVs.
The Biden administration announced a series of actions on Tuesday targeting China’s "unfair" trade policies. These actions will, among other things, make imports of steel and aluminum from the Asian nation even more prohibitive.
Domestic raw steel production ticked up again last week, now up to a three-week high according to the latest data released by the American Iron and Steel Institute (AISI).
The amount of new steel available to the US market, dubbed apparent steel supply, rebounded 7% in March, according to SMU calculations on Department of Commerce and American Iron and Steel Institute (AISI) data.
US raw steel output ticked up last week, according to the latest American Iron and Steel Institute (AISI) data.
US steel mill shipments dropped in March on-year but were up from February, according to the most recent figures from the American Iron and Steel Institute (AISI).
US raw steel production slipped again last week. It now stands at a 13-week low, according to the latest American Iron and Steel Institute (AISI) data. AISI estimated total domestic steel output estimated to have been 1,701,000 short tons (st) in the week ending April 27. That's down 0.9% compared to the week prior.
Steel imports held steady in March, up just 1% from February according to preliminary Census data released earlier this week.
Domestic raw steel production slipped last week and now stands at a four-week low, according to the American Iron and Steel Institute (AISI).
The Biden administration on Wednesday announced measures to support the domestic steel industry.