AZZ Inc. reported an 18% increase in net income in its fiscal first quarter of 2024, driven by a strong performance in its Metal Coatings business and by a full quarter with its Precoat Metals acquisition. The Fort Worth, Texas-based galvanizer and coil coater posted net income of $28.5 million in its fiscal Q1 ended […]
US Trade Representative Katherine Tai will travel to Brussels next week to continue discussions on establishing a “Global Arrangement on Sustainable Steel and Aluminum” with the European Union. Ambassador Tai will be in Belgium on July 20-21 to speak with European Commission EVP Valdis Dombrovskis. This is their second meeting in July, the USTR press […]
Steel prices continued to erode in June, a trend that began halfway through April. Hot-rolled coil (HRC) prices ended June at $875 per ton (43.75 per cwt) on average, falling by $115 per ton throughout the month. The SMU Price Momentum Indicator for sheet products remained shifted to Neutral halfway through June, after turning Lower […]
Commercial Metals Co. (CMC) said on Monday that Barbara R. Smith, the company’s CEO and chairman, will retire as CEO effective Sept. 1, and will be replaced by Peter Matt, who will serve as CEO and president. The Irving, Texas-based longs producer and metal recycler said that Smith has been appointed as executive chairman, also effective […]
US Trade Representative Katherine Tai met on Thursday in Cancun, Mexico, with Mexico’s Secretary of Economy, Raquel Buenrostro, where the two discussed confronting steel imports, among other issues. In a press release, the USTR said she spoke with Secretary Buenrostro regarding “the importance of addressing the recent surge of imports of steel and aluminum products, and […]
The LME aluminum 3-month price is moving down again after the 4th of July holiday and was last trading near $2,130 per metric ton (as of the writing of this article on July 7). The fact that the price resumed sharp declines and is not challenging the next resistance at $2,200 per metric ton shows […]
The ITC announced today it is taking up the fact-finding investigation requested by the US Trade Representative into greenhouse-gas emissions intensity in the US steel and aluminum industries. In steel, more than 50 products will be examined for their GHG emissions-intensity as of 2022. The study is set to be completed by Jan. 28, 2025. […]
The US International Trade Commission (ITC) said Wednesday it is conducting a fact-finding investigation to assess the greenhouse gas (GHG) intensity of steel and aluminum made in the US. This is in response to a letter sent by US Trade Representative Katherine Tai on June 5 requesting a Section 332 investigation in the midst of ongoing […]
The United States and Indian governments have agreed to terminate six disputes at the World Trade Organization (WTO). Benefits from the settlement include opening the US to more shipments of steel and aluminum made in India, according to New Delhi. “As a part of the agreement, the US has agreed to grant market access to […]
Wabash, Ind.-based Metal Source has completed its acquisition of Bedford Recycling, which has locations in Bedford and Mitchell, Ind. “We’re excited to integrate the Bedford recycling facility and Mitchell recycling facility into our current Metal Source business model,” Colin Denihan, Metal Source president and chief commercial officer of parent company Gebhart Holdings, told SMU in […]
With the US aluminum industry at a critical juncture, a new report is highlighting ways the Biden administration can use the Global Arrangement for Sustainable Steel and Aluminum (GASSA) to help the struggling domestic industry. Recall CRU’s aluminum analysts have previously shared with SMU the nightmare US aluminum smelters have been facing when it comes […]
Primetals Technologies and LanzaTech announced the signing of a renewed 10-year cooperation agreement around the steel industry’s “green transition,” the companies said on Tuesday, June 27. Headquartered in London, Primetals seeks new solutions in metals production, and sustainable ways to produce steel, aluminum, and other metals, according to its website. Meanwhile, LanzaTech, with headquarters in […]
The pressure that comes with being a CEO is not for the faint of heart. With every decision they make, CEOs have to keep in mind what’s best for the company. Karla Lewis, president and CEO of Reliance Steel & Aluminum, and Leon Topalian, president and CEO of Nucor Corp., sat down with Metal Service […]
A rare state visit by Prime Minister Narendra Modi of India culminated in a joint statement by President Biden and the prime minister last Thursday. This was a blockbuster statement, covering 58 paragraphs and resolving or narrowing differences on a host of issues. Some disputes had been festering for years. Despite pre-meeting statements advising that […]
CRU research manager Stephen Williamson shares an update on the aluminum market and pricing with SMU readers. This article was written The LME rallied in the days following the debt ceiling resolution by Congress and the price of aluminum pressed towards $2,300 per metric ton. This week, however, the price fell back through a key […]
The US and India have agreed to end six outstanding disputes at the World Trade Organization (WTO), some directly involving steel, US Trade Representative Katherine Tai said Thursday. Also, USTR Tai said that India has agreed to remove retaliatory tariffs, which it had imposed as a response to the US Section 232 national security measures […]
SMU’s Steel Summit Conference 2023 is two months away, and it’s never too early for attendees and prospective attendees to start preparing for how to take advantage of the conference’s resources. CRU principal analyst Josh Spoores sat down with SMU managing editor Michael Cowden and senior analyst David Schollaert on Tuesday for a webinar in […]
We are counting down the days until SMU’s Steel Summit Conference on Monday-Wednesday, Aug. 21-23, in Atlanta. It’s only a little over two months away. Approximately 755 people have already registered. Our discounted room blocks are almost gone. Register here. The event will again be held at the Georgia International Convention Center, a massive conference center in close […]
The US Federal Reserve has taken some pressure out of the market by announcing a pause in interest rate hikes, leaving rates at 5% to 5.25% after more than a year of consecutive rate increases. The decision on Wednesday came a day after official figures showed US inflation was 4% – the lowest pace of […]
The US and European Union are working on an agreement dealing with carbon emissions in the steel industry. The impact on bilateral trade could be high. In 2021, the US and EU agreed that the US would suspend the 25% Section 232 tariffs on steel and aluminum, and the EU would drop its World Trade […]
The LME aluminum three-month price is moving higher again as the week ending June 9 closes trading at $2,230/t. Failing to dip below the critical transition price of $2,000/t, The LME steadied itself despite very lackluster demand anywhere in the world. Trading in China also kept the regional exchange there neutral, if not a bit […]
Bipartisan legislation was introduced in Congress on Wednesday to level the playing field for American workers. The Leveling the Playing Field Act 2.0 would enhance US trade remedy laws to protect American workers and “combat China’s unfair, anti-free market trade practices that distort the global market,” according to a release from Rep. Bill Johnson (R-Ohio). […]
Domestic hot-rolled coil prices are down $55 per ton ($2.75 per cwt), the sharpest such decline we’ve seen all year. If this feels like an echo of June 2022, that’s because it is. Check out the chart below: A year ago, prices were falling hard as the shock of the war in Ukraine faded along […]
Editor’s note: Steel Market Update is pleased to share this Premium content with Executive members. For information on how to upgrade to a Premium-level subscription, contact Lindsey Fox at lindsey@steelmarketupdate.com. Prices of steelmaking raw materials have been largely on the decline over the last 30 days, as they were the month prior, the exception being pig […]
The US government is moving forward with its goal of establishing a common framework on carbon emissions in the steel and aluminum industries with the European Union by October. US Trade Representative Katherine Tai asked the International Trade Commission this week to investigate and compile a public report assessing the intensity of greenhouse-gas (GHG) emissions […]
The LME aluminum three-month price continued to make steady gains on the morning of June 2 and was seen trading at $2,308/t. The move marks the successful test of the key $2,200/t support earlier last week. SHFE aluminum prices also traded higher on that day. The cash price settled at RMB18,585/t and last traded at RMB18,665/t, […]
Steel prices continued to erode in May, following a trend that began halfway through the previous month. Hot-rolled coil (HRC) prices ended May at $990 per ton ($49.50 per cwt) on average, falling by $130 per ton throughout the month. The SMU Price Momentum Indicator for sheet products remained Lower during May after shifting to […]
The US and EU affirmed their intention to reach a common framework on carbon emissions in steel and aluminum by October at the Trade and Technology Council (TTC) meeting in Luleå, Sweden, on Wednesday. At the meeting the EU and US said that via the Transatlantic Initiative for Sustainable Trade they are “strengthening engagement towards […]
Swedish steelmaker SSAB is urging ambitious standards for the steel industry’s transition to green steelmaking as the EU-US Trade and Technology Council (TTC) meeting takes place in Luleå, Sweden, on May 30-31. Martin Lindqvist, president and CEO of SSAB, said that to succeed in the transition, effective frameworks, political leadership, and action are needed. “It is also […]
Bend, Oregon-based Origami Solar has announced its Gen 2 steel module frame, which can be sourced from domestic steelmakers. The solar panel company said the steel solar module frame represents “a game-changing opportunity to disrupt high-risk Asian supply chains.” It can achieve this by leveraging US steel resources to end the solar industry’s reliance on […]