Steel Products Prices North America
Weekly Raw Steel Production Still Edging Up
Written by David Schollaert
May 4, 2021
Raw steel production by U.S. mills rose for the third week in a row, hitting 1,788,000 tons in the week ending May 1, up 0.4% from the previous week when production totaled 1,781,000 net tons. The mill utilization rate last week averaged 78.7%, up from 78.4% the week before and up 44.4% from the same period last year when production was 1,238,000 net tons and utilization was just 55.2% due to the COVID shutdowns.
The market is still behind pre-pandemic levels, according the data compiled by AISI. When comparing the latest data to the comparable pre-COVID-19 period in 2019, current production is down 6.6%.
Adjusted year-to-date production through May 1 was 30,315,000 net tons, at an average utilization rate of 77.4%. That’s up 4.0% from the same period last year when the utilization rate was 73.6% and production was 29,143,000 net tons, AISI said.
Following is production by district for the May 1 week: North East, 160,000 net tons; Great Lakes, 616,000 net tons; Midwest, 185,000 net tons; South, 756,000 net tons; and West, 71,000 net tons, for a total of 1,788,000 net tons. Production was up by 7,000 net tons compared to the week prior. The Great Lakes and South were the sole districts to post increased output week-on-week.
Note: The raw steel production tonnage provided in this report is estimated. The figures are compiled from weekly production tonnage provided from 50% of the domestic producers combined with monthly production data for the remainder. Therefore, this report should be used primarily to assess production trends. AISI’s monthly production report provides a more detailed summary of steel production based on data supplied by companies representing 75% of U.S. production capacity. Note that capability for second-quarter 2021 is approximately 29.5 million tons compared to 29.1 million tons for the same period last year and 29.1 million tons for the first quarter.
By David Schollaert, David@SteelMarketUpdate.com
David Schollaert
Read more from David SchollaertLatest in Steel Products Prices North America
Nucor holds the line on published HR spot price
The steelmaker has kept its weekly consumer spot price for hot-rolled steel sheet unchanged since Nov. 12.
Nucor’s HR spot price unchanged for 5th week
Nucor’s weekly spot price for hot-rolled (HR) coil will remain at $750 per short ton (st) for a fifth week.
SMU price ranges: Market stable amid post-Thanksgiving glut
Steel sheet prices remain at or near multi-month lows, while plate prices continue edging lower from their mid-2022 peak.
Nucor again holds HR spot price at $750/ton
For the fourth week in a row, Nucor will keep its published spot price for hot-rolled (HR) coil unchanged.
SMU Community Chat: Timna Tanners on ‘Trumplications’ for steel in 2025
Wolfe Research's Managing Director Timna Tanners discusses the 'Trumplications' for steel in the coming year in this week's SMU Community Chat.