The United States has called for a special meeting with South Korean trade officials to discuss modifying the U.S.-Korea Free Trade Agreement (KORUS). In a July 12 letter to the Korean trade minister, U.S. Trade Representative Robert Lighthizer requested a special session in Washington to address problems with the agreement, including market access in Korea […]
Rising steel prices, some in anticipation of Section 232 trade action, are blurring the line between prime and secondary steel, report service center executives familiar with secondary steel products. Grand Steel Products, Wixom, Mich., sells both prime steel and secondary—material that did not meet the specifications of its initial customer but is still suitable for […]
Editor’s note: The opinions expressed here are those of trade attorney Lewis Leibowitz and do not necessarily reflect those of Steel Market Update. There will be more discussion about trade, trade suits and Section 232 in our upcoming SMU Steel Summit Conference, which will include presentations by Leibowitz and others on both sides of the […]
Editor’s note: The opinions expressed here are those of trade attorney Lewis Leibowitz and do not necessarily reflect those of Steel Market Update. There will be more discussion about trade, trade suits and Section 232 in our upcoming SMU Steel Summit Conference, which will include presentations by Leibowitz and others on both sides of the […]
Domestic raw steel production was 1,733,000 net tons in the week ending July 8, up 0.9 percent from the previous week and 4.0 percent from the same week in 2016, reports the American Iron and Steel Institute (AISI) in Washington. Mill capacity utilization in the July 8 week was 74.3 percent, up from 73.6 percent […]
Flat roll lead times have remained within a narrow range over the past six months, according to the manufacturing companies and steel service centers responding to our flat rolled market trends analysis last week. Hot rolled lead times now average 4.41 weeks, which is the same as what we reported in mid-June, but still one-half […]
We saw steel mill lead times as being essentially the same to slightly higher than what we measured at the time of the last price increase announcements (week of June 5th). When the announcements were made, most steel mills were actively trying to collect increases. We saw the bottom of our price range rise, and […]
The U.S. employment situation continues to be good. Net job creation in June, including revisions for April and May, was 269,000, and the latest number of job openings was the highest on record. The Bureau of Labor Statistics (BLS) net job creation report released on Friday exceeded economists’ expectations and was another example of why […]
The administrative law judge presiding over U.S. Steel’s Section 337 case against Chinese steelmakers has extended the deadline for fact discovery by three weeks. The close of discovery is now set for July 15, pushing back the evidentiary hearing from September to mid-October. In the International Trade Commission case it filed in April 2016, U.S. […]
SMU Steel Buyers Sentiment Index has come off historical highs set during the late first and early second quarters 2017. However, buyers and sellers of flat rolled steel continue to be optimistic about the potential for their company to be successful in both the existing market as well as three to six months into the […]
Domestic raw steel production totaled 1,717,000 net tons in the week ending July 1, off 0.7 percent from the previous week and down 1.5 percent from the same week in 2016. The mill capacity utilization rate was 73.6 percent, down from 74.2 percent the prior week and 74.5 percent the same time last year, reports […]
Once its new Ruhrstahl-Heraeus (RH) degasser is fully commissioned in the next 30-45 days, Big River Steel will have all its steelmaking equipment up and running. Except for “a few hiccups,” the startup of the new EAF mill in Osceola, Ark., has gone smoothly, said Mark Bula, chief commercial officer, “above plan, plan-plus.” Speaking at […]
In early June, the price of zinc had nosed down to about $1.10 per pound, raising hopes among buyers of galvanized steel that the mills might consider rolling back their coating extras–the extras mills charge when applying zinc to cold rolled or hot rolled substrate to produce galvanized products. Those hopes were short-lived as the […]
As if it is not enough to call every ton of imported steel “dumped,” “subsidized” or “unfairly priced,” steelmakers are now using a scare tactic by telling our politicians we need a strong domestic steel industry in the interest of national security. As a Bloomberg report pointed out, less than 3 percent of the steel consumed in the […]
Commercial Metals Co., Irving, Texas, plans to exit its International Marketing and Distribution Segment. As an initial step, on June 12, its CMC Cometals International subsidiary signed a definitive agreement to sell its raw materials trading division, CMC Cometals, to Traxys North America L.L. and Traxys Europe S.A., affiliates of The Carlyle Group. CMC Cometals […]
“Countries like China are clearly at fault for the decline of the North American aluminum industry,” said M. Robert Weidner, III, president and CEO of the Metals Service Center Institute, in written testimony to the Commerce Department on June 23. “China’s share of the world primary aluminum market rose from 10 percent in 2000 to […]
The Department of Commerce hearing Thursday on the proposed Section 232 for aluminum revealed the same big rift between supporters and opponents as in the steel industry. And for many of the same reasons, notably the effect on prices for downstream manufacturers and consumers and possible retaliation by global trading partners. Commenting on the proceedings, […]
The Association of Steel Distributors is now a technical affiliate of the Fabricators & Manufacturers Association, International, Elgin, Ill. ASD functioned as an independent, nonprofit service center trade group for 75 years, but changing market conditions and flagging membership forced the association to ally with a larger organization to ensure its continued survival. “This is […]
The sentiment among buyers and sellers of flat rolled steel remains largely positive, according to Steel Market Update’s latest steel market analysis, although it has dipped a bit in the past month as the industry awaits a ruling on Section 232 and whether the government will further restrict steel imports on the basis of national […]
Steel mill flat rolled lead times, which have generally trended downward this spring, my be showing early signs of lengthening, reflecting new strength in demand for domestic steel products. Mills were successful in collecting a price increase earlier in the month. Despite SMU data that shows service center inventories at “comfortable” levels, some distributors may […]
Steel buyers report that mills are considerably less willing to negotiate prices on spot orders than they were a month, or even two weeks, ago. The findings of the latest SMU survey of service centers and manufacturers indicates that only about half find mills willing to negotiate on hot roll spot buys, compared with more […]
Domestic raw steel production inched up in the past week and remains ahead of last year’s pace, reports the American Iron and Steel Institute in Washington. In the week ending June 17, domestic raw steel production totaled 1,739,000 net tons, up 1.2 percent from the previous week, but down 0.9 percent from the same week […]
The Metals Service Center Institute, Rolling Meadows, Ill., has elected Holman Head chairman of the MSCI board, effective July 1. Head is president and chief operating officer of O’Neal Industries, Birmingham, Ala. He replaces Richard A. Robinson, president of Norfolk Iron & Metal Co., Norfolk, Neb., who has served as chairman for the last two […]
“I bet the next increase happens later this week or at the latest next Monday,” one mill executive told Steel Market Update (SMU) earlier this week. Soon, we were hearing similar comments about new flat rolled steel prices coming from others (non-mill) in the industry. As you all are well aware by now, the U.S. […]
Uttam Galva North America, Inc. (UGNA), a supplier of cold rolled and galvanized steels, tells SMU it has temporarily suspended taking new orders in the United States for its mill in India in reaction to the Section 232 investigation. “For the last few weeks, we have stayed on the sidelines while 232 is being analyzed […]
About 65 percent of respondents to SMU’s June 5 Steel Buyers Sentiment Index questionnaire predict steel mills will not be able to collect the full $30 per ton flat rolled steel price increase announced last week, while just 35 percent believe the hike will stick. Nearly two out of three respondents, mostly service centers and […]
The sentiment among buyers and sellers of flat rolled steel remains largely positive, although concerns about the Section 232 investigation, the recent mill price hike and the coming summer slowdown have dampened the outlook for the market three to six months down the road, according to the latest SMU Steel Buyers Sentiment Index. As a […]
Flat rolled lead times have continued to decline over the past 10 weeks, according to this week’s SMU Flat Rolled Steel Market Trends questionnaire. Buyers and sellers of flat rolled steel report shorter lead times than in early May. Lead times on all products are considerably shorter than one year ago. Shorter lead times are […]
Lead times are declining, which reflects a possible softening of demand, thus domestic mills appear to be more willing to negotiate spot pricing on hot rolled, cold rolled, hot-dipped galvanized and Galvalume steels than they were earlier in the year. About 70-80 percent of steel buyers responding to this week’s flat rolled steel market trends […]
With the shuttering of up to 150 million tons of induction and EAF steelmaking capacity in China reducing its consumption of ferrous scrap, the Asian giant has actually begun exporting scrap material. Steel Market Update (SMU) has been following the progress of the Chinese as they attempt to enter the ferrous scrap export markets. They […]