The benchmark price for hot rolled steel has declined for two weeks in a row, according to Steel Market Update’s latest surveys of steel buyers. In both cases, the decline was a mere $5 per ton. Margins of error being what they are, your takeaway should not be -$5, or even a decline (which could […]
China should no longer get a “free ride” and be able to “back door” imports via the current language in free trade agreements the U.S. has with other countries, said a trio of senators last week in a letter to U.S. Trade Representative Katherine Tai. The Market Economy Sourcing Act, sponsored by Sens. Bob Casey […]
Much like when seasons change, wholesalers of galvanized steel products sense a whiff of something different in the atmosphere, brought to U.S. shores along with thousands of tons of low-priced imports. “The import market has opened people’s eyes. With that type of a price spread – coupled with auto steel still being impacted by the […]
Steel Market Update’s check of the market this week puts the average spot price for hot rolled at an incredible $1,950 per ton. But for the first time in nearly a year, we are not reporting a new record high this week. Our HRC price actually dipped by a small $5 per ton. Next week […]
As expected, Steel Buyers Sentiment declined over the past two weeks from record highs registered in early September shortly after Steel Market Update’s annual Steel Summit. The previous results were no doubt influenced by the conference, making the six-point change since then more of a correction than a decline. The takeaway from the current index […]
Lead times for spot orders of flat rolled and plate products from the mills have all seen notable declines this month, with the exception of Galvalume, according to Steel Market Update’s check of the market this week. The average lead time for hot rolled is now less than nine weeks, down from more than ten […]
What does the rapid advancement of solar energy mean for the steel industry? Solar has major implications, both for the steel it will consume and the energy it will provide. Without solar energy, steelmakers have no chance of reaching their zero-emissions goals over the next three decades. Even if steel mills can somehow figure out […]
Prime scrap prices saw a big drop in September, down $40-50 per gross ton (GT), report Steel Market Update sources. Obsolete grades also declined, though not as much, at down $20-25/GT in most parts of the country. Declining scrap prices may contribute to downward pressure on finished steel prices in the fourth quarter. Prices for […]
The prices contractors pay for construction materials continued to increase in August, while many firms reported struggles to get those materials delivered on time, according to an analysis of government data by the Associated General Contractors of America. AGC urged Washington officials to address the challenges affecting the entire supply chain and driving the price escalations. […]
Is there really any such thing as a “foreign car” anymore? Who among us hasn’t driven a vehicle with a foreign-sounding name like Toyota, Honda or Nissan? Most likely it was built down the road in Kentucky, Alabama or Mississippi. And produced with American-made steel and other locally sourced materials. An economic impact report just released […]
It’s ironic that so many companies finally have the financial capital they need to expand – thanks to record-high steel prices – but not the human capital. The shortage of qualified labor has been a serious drag on growth in most sectors of the economy, including steel. But ITR Economics reports some signs that the pandemic-related […]
There’s a good chance the Section 232 tariffs on steel imports from the European Union could be replaced by a tariff rate quota (TRQ) as soon as November as a result of trade talks now under way between officials from the U.S. and EU. The EU is strongly opposed to the Trump-era “national security” tariffs […]
Samuel, Son & Co., Limited, is constructing a new automotive processing facility in Querétaro, Mexico. This new operation, along with an existing automotive facility in Monterrey, will position Samuel as a leading metals processor to global automotive brands and their supply chain partners operating in Mexico, the company said. Samuel expects to complete construction of […]
Phil Bell, president of the Steel Manufacturers Association, puts the chances of the U.S. steel industry facing a carbon tax at roughly 50-50, “though it is trending that way,” he said in remarks during Steel Market Update’s Steel Summit last month in Atlanta. “SMA is opposed to any taxes that aren’t necessary and is opposed […]
Steel Market Update will not publish on Sunday due to the Labor Day holiday. We will resume our normal publishing schedule on Tuesday. We will be sending out our market trends questionnaire on Monday and Tuesday as usual, however. Please take the time to share your views on steel prices and other factors affecting the […]
In mid-August, when lead times registered their first significant decline of the year, some interpreted it as a sign the pendulum had finally begun to swing the other way. Lead times have long been expected to shorten as the mills’ ability to supply the market finally catches up with demand. But any predictions of a […]
In the near term, ferrous scrap prices are heading down. But in the long term – with the proliferation of electric arc furnace (EAF) steelmaking around the globe putting added pressure on scrap supplies – the price trend for scrap is definitely pointing upward. The cost of scrap and other metallics is of high interest […]
Total steel imports into the United States jumped by more than 20% in the first seven months of the year, versus the same period in 2020, reported the American Iron and Steel Institute, based on preliminary Census data. Foreign steel, including billet and slabs, totaled 17.7 million net tons for a 20.6% year-over-year increase. Finished […]
Two of the steel industry’s most respected analysts delivered a reality check to the market on Monday during SMU’s Steel Summit in Atlanta. Record-high steel prices enjoyed by steelmakers and distributors for the past year “can’t last,” they declared. Simply put, supply-demand fundamentals indicate that prices are due – indeed overdue – to drop significantly in the next […]
Steel prices need to correct to “a healthy level,” said steel buyers on the consumer panel at the SMU Steel Summit on Wednesday. But none volunteered an exact number. The hot rolled price has overcorrected from the trough of $440 per ton ($22 per cwt) last August as the economy struggled with the pandemic, agreed […]
Here’s the Steel Summit program for Wednesday, Aug. 25, at the Georgia International Convention Center in Atlanta: 7 a.m. – Doors open at GICC. All day beverage sponsored by Felux and pastries sponsored by Ratner Steel 8:20-8:30 a.m. – Opening Remarks by SMU President and CEO John Packard 8:30-9:30 a.m. – Steel […]
Eric Daniel, director of supply chain for the NIM Group, is the recipient of the 2021 NexGen Leadership Award. Daniel was recognized in a ceremony Tuesday by Phil Bell, president of the Steel Manufacturers Association, which sponsors the award. The NexGen Leadership Award is designed to recognize talented young executives, age 35 or younger, who […]
Despite the uncertainty of the pandemic year, Crowe’s 2021 Technology in Metals Survey indicates that technology remains a strategic imperative for a majority of metals industry executives. In fact, 59% of respondents increased technology spending in 2020 and 56% planned to increase spending on computers, software and other systems again in 2021. Crowe LLP, the […]
The infrastructure bill passed by the Senate last week is important not just for what’s in it, but also for what’s not. What’s not is a much needed increase in the fuel tax that feeds the federal Highway Trust Fund, said Jim Burg, president of James Burg Trucking Co., Warren, Mich. Burg is also co-chairman […]
If steel buyers are concerned about lead times that are beginning to shorten and price increases that are beginning to slow, there is no sign of it in this week’s Steel Buyers Sentiment readings. The Current and Future Sentiment indexes remain at or near record highs as steel producers and distributors continue to enjoy record […]
Steel Buyers Sentiment, as measured by Steel Market Update, has never been higher despite concerns over the latest COVID variant and signs that the rate of rise in steel prices is beginning to slow. SMU’s Current Sentiment Index registered a new all-time high of +84 this week – the first time the index has broken […]
Construction firms are struggling to find enough qualified workers to hire even as they continue to be impacted by pandemic-induced project delays and supply chain disruptions, according to the results of a workforce survey conducted by the Associated General Contractors of America and Autodesk. The survey results underscore how the coronavirus pandemic has created constraints […]
Roughly half of the steel executives responding to Steel Market Update’s market trends questionnaire this week believe the infrastructure legislation now working its way through Congress will have a significant impact on steel demand in the next year or two. The other half are unsure if the two parties in Washington can reach agreement even […]
With the exception of coated products, lead times for delivery of flat rolled and plate steel have shortened by a week or more – the first significant decline this year and a possible sign that rising steel prices are losing momentum. Lead times for spot orders of steel have extended continuously since the market bottomed last […]
Lead times have shortened noticeably based on Steel Market Update’s check of the market this week. But don’t read too much into that one data point. Other factors point to more of the same for steel prices, at least for a while. As reported elsewhere in this issue, lead times appear to have shortened by a […]