ArcelorMittal is not expecting a big bump in business anytime soon due to the hurricane damage in Texas and the Southeast. “That will take a while to pass through,” said Wendell Carter, vice president and general manager of the steelmaker’s Indiana Harbor mill. Carter responded to questions during a media tour of the East Chicago, […]
ArcelorMittal is not expecting a big bump in business anytime soon due to the hurricane damage in Texas and the Southeast. “That will take a while to pass through,” said Wendell Carter, vice president and general manager of the steelmaker’s Indiana Harbor mill. Carter responded to questions during a media tour of the East Chicago, […]
Thirty-four states and the District of Columbia added construction jobs in the year from August 2016 to August 2017, reports the Associated General Contractors of America, analyzing Labor Department data. Hiring likely would have been stronger if not for a shortage of workers. Seventy percent of companies report having a hard time finding craft workers […]
ArcelorMittal is on a mission to make sure that steel remains the material of choice for a modern world. The steelmaker invited state and local dignitaries, staff and members of the media to an open house on Wednesday to commemorate the 50th anniversary of the ArcelorMittal Global Research and Development Center in East Chicago, Ind. […]
Domestic raw steel production totaled 1,733,000 net tons in the week ending Sept. 9, an 8.9 percent increase from the same period last year, but a decrease of 0.8 percent from the prior week. The mill capability utilization rate was 74.3 percent, down slightly from 74.9 percent the prior week, but up from 68.0 percent […]
The Metals Service Center Institute is urging the Trump administration to take “swift, decisive action on the Section 232 steel investigation to bring certainty to the marketplace.” In a letter to President Trump last Thursday, MSCI President and CEO Robert Weidner, III, and Chairman R. Holman Head, stated that “problems posed by foreign government-sponsored capacity […]
The U.S. economy should finish 2017 strong, but the leading indicators point to a downturn in the second half of 2018 followed by a mild global recession in 2019, predicts economist Alan Beaulieu, principal of ITR Economics, who addressed a sellout crowd Aug. 30 at Steel Market Update’s Steel Summit Conference in Atlanta. “You will […]
Seven out of 10 respondents to the latest Steel Market Update market trends questionnaire feel the United States should not withdraw from the North American Free Trade Agreement. Less than 30 percent say the U.S. should follow through on its threats to pull out of the trade pact if it does not win concessions from […]
Japan-based Metal One Corp. has agreed to acquire Cargill’s U.S. metals business. The two companies expect to close the sale later this year. The agreement includes Cargill’s U.S. metals supply chain business, which includes commercial activities based in Minneapolis and Houston, as well as eight processing facilities in seven U.S. cities: Windsor, Colo.; Panama City, […]
Steel buyers and sellers report that most mills are still open to price discussions, even after recent price increase announcements, based on responses from Steel Market Update’s latest flat rolled market trends questionnaire. Over the course of the past week, SMU canvassed active participants in the manufacturing and service center segments of the flat rolled […]
Flat rolled lead times, the amount of time it takes for the steel mills to produce an order if placed today, have shortened ever so slightly in the past month, according to data collected by Steel Market Update (SMU) from manufacturers and steel service centers earlier this week. Viewed over a longer time frame, lead […]
Reliance Steel & Aluminum Co., Los Angeles, reports that its operations in the Houston area suffered no material damage to facilities, equipment or inventories because of Hurricane Harvey. Many facilities were closed and unable to ship for most of last week due to the catastrophic flooding, but are now reopened and operational. Reliance operates 13 […]
Editor’s note: Following is a response from Zekelman Industries CEO Barry Zekelman to remarks by Daniel Pearson of the Cato Institute published in Steel Market Update’s Sept. 5 newsletter. Zekelman comments on his position on imports and the current state of steel-related trade into the U.S. During our exchange at the recent SMU Steel Summit […]
Reliance Steel & Aluminum Co., Los Angeles, reports that its operations in the Houston area suffered no material damage to facilities, equipment or inventories because of Hurricane Harvey. Many facilities were closed and unable to ship for most of last week due to the catastrophic flooding, but are now reopened and operational. Reliance operates 13 […]
Both current and future sentiment showed a slight improvement in the latest SMU Steel Buyers Sentiment Index, based on data gathered in early September. The index measures how buyers and sellers of flat rolled steel feel about their company’s ability to be successful both in the current market environment, as well as three to six […]
Three out of four steel buyers responding to Steel Market Update’s latest market trends questionnaire believe the hurricane and flooding in Houston will have a significant impact on the steel industry, at least for the short term. Following are some insightful comments: · “It will have an impact. It will be negative in the short-term, […]
Domestic raw steel production totaled 1,747,000 net tons in the week ending Sept. 2, up 0.4 percent from the prior week and an 8.6 percent increase from the same period in 2016. The mill capability utilization rate was 74.9 percent for the week, up from 68.8 percent in the same week last year, reports the […]
Toronto-based Russel Metals, Inc., has acquired Color Steels, Inc., a service center that processes and distributes pre-painted metals from facilities in Thornhill, Ontario, and Laval, Quebec. David Sanderson will continue as president of Color Steels, along with the current management team. Color Steel’s revenues for the last year totaled approximately $45 million. “This unique opportunity […]
The market’s obsessive speculation over Section 232 and possible new tariffs on steel imports has caused many to miss the big story, said Timna Tanners, research analyst for Bank of America Merrill Lynch. “Stop worrying about what’s happening in Washington and pay more attention to what’s happening in China,” she told the sellout crowd at […]
The growth of total construction spending is slowing, though still positive year over year. July data for construction put in place (CPIP) was released by the Department of Commerce on Friday. Total construction still shows positive growth, but slowed to 0.9 percent year over year in the latest three months of data. Privately funded projects […]
Scrap prices are likely to jump by $20 to $30 per ton in the short term as a result of the hurricane and flooding in Houston, predicts John Harris of Aaristic Services, Inc., who was a panelist at Steel Market Update’s Steel Summit Conference last week in Atlanta. Harris did not have time to respond […]
Economic activity in the manufacturing sector expanded again in August as the Institute for Supply Management’s PMI registered 58.8 percent, an increase of 2.5 percentage points from July. This indicates growth in manufacturing for the 12th consecutive month and is the highest reading since April 2011, reports ISM. Any reading above 50 percent indicates expansion. […]
Barry Zekelman calls himself a free-trader. Yet his company, Zekelman Industries, filed a trade case last year alleging that Chinese producers of circular welded steel pipe were guilty of evading U.S. import duties. Espousing free trade while suing to block imports may seem like a contradiction, but Zekelman made a good case for his position […]
“Hurricane Harvey was an incredibly expensive, economy-changing event. The impact will be staggering,” said economist Chris Kuehl of Armada Corporate Intelligence, speaking at Steel Market Update’s Steel Summit Conference this week in Atlanta. Perhaps 10 percent of Houston’s population could be permanently displaced, creating a future labor shortage. “Companies may not get those workers back,” […]
Domestic raw steel production for the week ending Aug. 26 totaled 1,740,000 net tons, a 5.1 percent increase from the same period last year, but down 1.3 percent from the previous week. The mill capability utilization rate for the Aug. 26 week was 74.6 percent, up from 70.8 percent the same time last year. Adjusted […]
Driven by a steep drop-off in shipments from Brazil, U.S. steel imports fell 11.5 percent from June to July. Despite the monthly decline, the 3.47 million net tons of imports were still up 6.3 percent compared to July of last year, reports the American Institute for International Steel, Alexandria, Va. Imports from Brazil plunged more […]
André Gerdau Johannpeter has resigned as the chief executive of Gerdau SA, one of the largest steelmakers in the Americas, as members of the founding family exit from the company’s executive management. Gostavo Werneck, head of Gerdau’s Brazil operations, will replace him in January. Also stepping down from their management roles are Executive Vice-Presidents Claudio […]
Michael Wagner, who took over as president of the North American Steel Alliance on May 1, hopes to build on the buying group’s 20 years of success. “It’s not broken; it doesn’t need to be fixed. I look at the next 20 years and how we can make it even more successful,” he said. Wagner […]
Driven by a steep drop-off in shipments from Brazil, U.S. steel imports fell 11.5 percent from June to July. Despite the monthly decline, the 3.47 million net tons of imports were still up 6.3 percent compared to July of last year, reports the American Institute for International Steel, Alexandria, Va. Imports from Brazil plunged more […]
Researchers in Asia claim they have developed a new way to make steel that offers a high degree of strength without sacrificing ductility, creating a strong but formable material that could prove useful in the production of lighter, more fuel-efficient vehicles, among many other applications. Typically, making steel stronger decreases its formability. The Hong Kong-Beijing-Taiwan […]