Like the mills, service centers enjoyed robust returns in 2018. With one quarter in the books, it appears this year is setting up to be more challenging. Steel Market Update has recruited three of the industry’s top distribution execs to share their perspectives on steel demand in 2019 during SMU’s Steel Summit Aug. 26-28 in […]
Like the mills, service centers enjoyed robust returns in 2018. With one quarter in the books, it appears this year is setting up to be more challenging. Steel Market Update has recruited three of the industry’s top distribution execs to share their perspectives on steel demand in 2019 during SMU’s Steel Summit Aug. 26-28 in […]
Steel Dynamics has narrowed the choice for its new flat rolled steel mill to either Texas or Louisiana. The planned $1.8 billion EAF mill will have an annual production capacity of 3 million tons and include a 450,000-ton galvanizing line and 250,000-ton paint line with Galvalume capability. The mill will differentiate itself by producing higher […]
Steel mill utilization has declined by a percentage point in the past two weeks but remains near a healthy 82 percent, reported the American Iron and Steel Institute. U.S. raw steel production for the week ending April 20 decreased by 0.6 percent from the previous week to 1,903,000 net tons, while the mill capability utilization […]
By CRU Chief Economist Jumana Saleheen The latest Chinese data surprised on the upside. It suggests that the China stimulus is working. But some of the strength is also likely due to one-off factors. As a result, we see the latest data as an indication that the economy is stabilizing rather than accelerating. Recent data […]
Steel Technologies is assessing the operational impact from a fire early Monday morning that knocked out power and damaged the pickle line and pickle bay at its Ghent, Ky., plant. No injuries were reported from the incident. State and local officials have confirmed that chemicals used in production were contained in designated storage vessels, the […]
The official economic statistics out of China show a surge in industrial production in March and a steady growth in fixed asset investment. Once each quarter, Steel Market Update publishes the official statistics for Chinese GDP, industrial production, consumer price inflation and fixed asset investment. We don’t know the accuracy of these numbers but we […]
Data in Steel Market Update’s Steel Buyers Sentiment Index took a decidedly pessimistic turn this week. Current Sentiment hit its lowest reading since October 2016. The goal of the index is to measure how buyers and sellers of steel feel about their company’s ability to be successful today (Current Index), as well as three to […]
Mills are willing to talk price on all types of steel products to get the orders, report the vast majority of buyers responding to Steel Market Update’s questionnaire this week. Corroborating the trend, SMU data shows steel prices moving downward or sideways, raising questions about current steel demand. About 86 percent of respondents said the […]
Average lead times for spot orders of steel, including all types of products, have shortened slightly in the past two weeks. Hot rolled lead times now average around four weeks, cold rolled and Galvalume around six weeks, and galvanized down to nearly six and a half weeks. Lead times for plate are now less than […]
By CRU Senior Analyst Erik Hedborg Demand for steelmaking raw materials has improved in April. Chinese steel prices have jumped on rising seasonal demand, particularly from the construction sector. Steel production in the country has also picked up, as indicated by the blast furnace (BF) utilization rate displayed in CRU’s Coking Coal and Iron Ore Dashboards. This has […]
Steel interests in North America and the rest of the world are watching intently to see if the Trump administration grants some tariff relief to Canada and Mexico to clear the way for final approval of the new U.S.-Canada-Mexico Trade Agreement. One possible compromise being discussed (albeit one so far opposed by the U.S. trading […]
Steel mill utilization around 82 to 83 percent appears to be the norm for 2019. U.S. raw steel production for the week ending April 13 decreased by 0.7 percent from the previous week to 1,915,000 net tons, while the mill capability utilization rate inched down a half percentage point to 82.3 percent. The week’s production […]
Editor’s note: The following analysis by Alex Lawson of Law 360 describes the American Institute for International Steel’s position on its filing Monday with the U.S. Supreme Court. The legal push to strike down the Cold War-era law used by President Donald Trump to set tariffs on national security grounds unexpectedly shifted to the U.S. […]
Editor’s note: The following analysis by Alex Lawson of Law 360 describes the American Institute for International Steel’s position on its filing Monday with the U.S. Supreme Court. The legal push to strike down the Cold War-era law used by President Donald Trump to set tariffs on national security grounds unexpectedly shifted to the U.S. […]
By CRU Analyst Michelle Liu Turkish prices have continued to fall, down $7 /t w/w for the week ending Friday, April 12, to $305 /t CFR for HMS 80:20. Warmer weather has increased supply in the U.S. and Europe, placing downward pressure on scrap prices there. This was compounded by reduced scrap demand on both […]
Global steel demand will top 1.75 billion metric tons by the end of next year, despite economic headwinds in many parts of the globe, predicts the World Steel Association in its April 2019 Short Range Outlook. Worldwide, steel demand will increase by 1.3 percent this year to 1,735 Mt, followed by further 1 percent growth […]
By CRU Principal Analyst Matthew Watkins. In the event of a no-deal Brexit, the key short-term impacts on the European steel market are likely to be increased delays for material crossing the UK-EU border as well as modifications to the EU safeguard system. Beyond short-term behavior such as stockpiling, there are possible longer-term effects, perhaps […]
Material Sciences Corporation was honored with a 2019 Automotive News PACE Award for its MSC Smart Steel®, a new multilayer steel laminate engineered as a direct substitute for low carbon stamped vehicle body parts. Offering up to a 35 percent mass savings compared with same-thickness standard steel, MSC Smart Steel is produced as a coil, […]
US Midwest HRC price volatility has increased markedly in recent months as government policy and inelasticity of domestic supply have led to large variations in physical market price. Concurrently, volume and open interest on the CME’s HRC futures and options contracts, settled on CRU’s US Midwest HRC price (“The CRU”) has surged as physical market […]
By CRU Chief Economist Jumana Saleheen The market had hoped that China would unveil a large stimulus package at the March NPC, but any expectation of a large boost to world growth and commodities demand has not come, yet. The current stimulus package is smaller, less potent and less positive for commodities demand than previous […]
Following a slower than expected first quarter, activity has begun to pick up in the nonprime/secondary steel market, report service center executives. “Maybe that’s good news for April going forward,” said Lisa Goldenberg, president of Delaware Steel of Pennsylvania, Fort Washington, Pa. Nonprime or secondary steel includes coils that are rejected because they failed to […]
The Trump administration is threatening to impose tariffs of up to 100 percent on goods imported from the European Union as early as this summer in a long-running dispute over aircraft subsidies. A preliminary list of goods that could be affected covers every major product group. Deadline for comments on the list is May 28. […]
The steel industry is on the brink of a capacity boom as mills reinvest their record profits in dozens of mill additions and upgrades. What will that mean for steel supply and prices in the coming years? Who better to answer that question than the chief executives from four of North America’s leading steel producers—JSW […]
The steel industry is on the brink of a capacity boom as mills reinvest their record profits in dozens of mill additions and upgrades. What will that mean for steel supply and prices in the coming years? Who better to answer that question than the chief executives from four of North America’s leading steel producers—JSW […]
A surprising two out of three respondents to Steel Market Update’s market trends questionnaire last week said they are not concerned about the direction of steel prices, at least in the short term, though some question the staying-power of current demand. Steel Market Update asked: “Foreign steel imports are dropping and the domestic mills are […]
U.S. raw steel production for the week ending April 6 increased by 0.8 percent from the previous week to 1,928,000 net tons, while the mill capability utilization rate inched up by about a half percentage point to 82.8 percent. The week’s production represented a 7.9 percent increase from the same period last year, reported the […]
Sales of HVAC products remain fairly strong in most parts of the country, but prices don’t fully reflect that demand, reported members of the Heating, Air-conditioning and Refrigeration Distributors International in their monthly conference call. “I still think the market is fragile,” commented one HARDI member. “The mills have a lot of fundamentals in their […]
By CRU North America Analyst Ryan McKinley U.S. long product prices have come under downward pressure, driven primarily by persistently high inventory levels. This inventory build-up has been compounded by an increase in import levels in March relative to the prior month, and consistently wet weather in many regions of the U.S. has delayed any […]
Data in Steel Market Update’s Steel Buyers Sentiment Index were slightly more optimistic this week, though comments from respondents reflect concerns in the market about trade issues, steel demand and the economy. We also continue to see Current Sentiment as being less optimistic than at this time one year ago. However, our Future Sentiment Index […]