By CRU Principal Analyst Josh Spoores and CRU North America Analyst Ryan McKinley U.S. domestic scrap prices fell by $10 /l.ton m/m in the Great Lakes and Ohio Valley for most grades prior to the Independence Day holiday, but dealers the following week pushed back on the price decline, with some successfully securing little to […]
The U.S. International Trade Commission ruled today that imports of steel propane cylinders from China and Thailand are causing injury to the domestic industry, marking a victory for U.S. producers including Worthington Industries and Manchester Tank and Equipment. The ITC’s final determination places dumping and subsidy margins of 37-217 percent on China and 10.77 percent […]
Economic activity continued to expand at a modest pace from mid-May through early July, although manufacturing production was generally flat, reported the Federal Reserve in its July 17 Beige Book. The Fed’s periodic survey of the market found businesses have a generally positive outlook for the coming months, with expectations of continued modest growth despite […]
The U.S. mill capability utilization rate increased by 1.1 percent from the previous week, edging back up over 80 percent, reported the American Iron and Steel Institute. Raw steel production for the week ending July 13 totaled 1,867,000 net tons, for a mill utilization rate of 80.2 percent. Production was up by 1.6 percent compared […]
Perhaps taking a page from automakers’ playbook, ArcelorMittal USA reportedly sent a letter to its suppliers last week stating that it planned to implement a 10 percent price reduction on all existing purchase agreements, effective July 31. S&P Global Platts reported that ArcelorMittal is calling on suppliers to help it cut costs as it works […]
By CRU Senior Analyst Erik Hedborg Iron ore prices jumped back in the past week as Chinese iron ore demand remained steady while weak seaborne supply from Australia has kept port inventories at a low level. On Tuesday, July 16, CRU has assessed the 62% Fe fines price at $122.00 /t, a $4.00 /t increase […]
Industry optimism, as measured by Steel Market Update’s Steel Buyers Sentiment Index, continues to waver in the face of uncertain demand in some sectors and steel prices that are at an important tipping point. The mills have announced price increases totaling $80 per ton in the past two weeks. If they succeed in reversing the […]
California Steel Industries is the latest mill to raise flat rolled steel prices. In a letter to customers on Wednesday, the Fontana, Calif.-based steelmaker said transaction prices for hot rolled, P&O, cold rolled and galvanized steels would increase by $40 per ton ($2/cwt) effective immediately. CSI’s move follows on similar announcements this week from Nucor, […]
Mill Steel Co., the Grand Rapids, Mich.-based distributor of flat-rolled carbon steel, has rebranded of its steel framing company, Steel Structural Products, to Mill Steel Framing. The rebranding of the steel framing and accessory operations under the parent trademark is well-timed, the company said, as this year marks Mill Steel’s 60th anniversary. Mill Steel Framing […]
California Steel Industries is the latest mill to raise flat rolled steel prices. In a letter to customers on Wednesday, the Fontana, Calif.-based steelmaker said transaction prices for hot rolled, P&O, cold rolled and galvanized steels would increase by $40 per ton ($2/cwt) effective immediately. CSI’s move follows on similar announcements this week from Nucor, […]
As widely expected, U.S. Steel, NLMK USA and USS-POSCO Industries notified customers Wednesday that they have increased flat rolled steel prices by $40 per ton, following on similar announcements by Nucor and ArcelorMittal the day before. All total, U.S. steelmakers have raised prices for hot rolled, cold rolled and galvanized steels by $80 per ton […]
Steel price negotiations have tightened considerably as the mills have begun to hold firm in support of two $40 per ton price increases announced in the past two weeks. Note that Steel Market Update began gathering the data below on Monday, just prior to the latest mill price increase announcements on Tuesday and Wednesday. In […]
Lead times for steel delivery have moved out a bit in the past two weeks, lending support to recent mill price increases. The average lead time for hot rolled has moved up to nearly four weeks, cold rolled to nearly six weeks, and coated steels to more than six weeks. Plate lead times are bucking […]
By CRU Principal Analyst Josh Spoores Sheet price movements have varied across the major markets since mid-June. There were slight gains in China and South East Asia, while prices in Europe were primarily steady m/m. However, for all other markets including North & South America, CIS, India and Japan, prices were lower by 3-9 percent […]
Canada’s Samuel, Son & Co., Limited, has named Colin Osborne to replace the retiring Bill Chisholm as the company’s president and chief executive officer, effective Aug. 1. Osborne has been transitioning to the leadership role since late 2018 as Samuel’s president and chief operating officer. Chisholm has served as CEO since 2013. “On behalf of […]
As widely expected, U.S. Steel and NLMK USA notified customers Wednesday that they have increased flat rolled steel prices by $40 per ton, following on similar announcements by Nucor and ArcelorMittal the day before. All total, U.S. steelmakers have raised prices for hot rolled, cold rolled and galvanized steels by $80 per ton in the […]
Nucor and ArcelorMittal announced a second price increase on flat rolled steel today, and other mills are likely to follow suit. Effective immediately on new orders, prices for Nucor’s hot rolled, cold rolled and galvanized steel products are increased by $40 per ton ($2/cwt). Following Nucor’s lead, ArcelorMittal USA also raised base prices on its […]
Ferrous scrap prices for July settled down $10 per ton in the Western Pennsylvania/Ohio/Indiana markets, stayed sideways in the southern markets, and saw a combination of the two at points west, reported Steel Market Update sources. “This is a far cry from recent expectations of down $20-30/GT and represents what I believe is the bottom […]
Ferrous scrap prices are widely expected to move up in August anywhere from $10 to $30 per ton, lending support to higher finished steel prices. “Most of the trade on both sides of the aisle are expecting the August market to strengthen, though there is debate on how much,” said one Steel Market Update source. […]
By CRU Senior Analyst Erik Hedborg The high volatility in the iron ore market continues. After peaking on June 2, iron ore prices fell sharply at the end of last week before rebounding on Monday and Tuesday. On July 9, CRU has assessed the 62% Fe iron ore price at $118 /t, down $6.00 w/w. […]
The U.S. mill capability utilization rate saw a slight dip again last week to 79.4 percent–below the 80 percent level steelmakers had hoped to maintain. Raw steel production for the week ending July 6 totaled 1,847,000 net tons, the lowest level seen since last fall. Production was down 0.2 percent from the previous week, but […]
The steel price increases announced by the major mills have not had much effect on the HVAC sector yet, but members of the Heating, Air Conditioning & Refrigeration Distributors International (HARDI) are hopeful the market has bottomed and the value of their inventories has stabilized. “There hasn’t been much change in behavior on the street […]
As many predicted, the mill capability utilization rate was bound to dip below 80 percent soon as domestic steelmakers ease back on production to trim supplies in pursuit of higher steel prices. Indeed, average utilization dipped last week for the fifth week in a row, by a full percentage point, to 79.5 percent. Raw steel […]
By CRU Senior Analyst Erik Hedborg Iron ore prices continued to climb in the past week as port stocks fell further and the market enters a period of weaker seaborne supply. On Tuesday, July 2, CRU assessed the 62% Fe fines price at $124 /t, up $7.50 /t w/w. Demand in China remains strong as […]
By CRU Analyst Erik Hedborg The iron ore price averaged $106 /t in June, which brings the 2019 year-to-date price as high as $90 /t. However, in the second half of the year, we see a few bearish factors that will contribute to prices being lower than they are today. Those factors include: • Demand contraction […]
Canada’s Stelco, Hamilton, Ontario, has begun shipping fully processed, annealed cold-rolled sheet after investing more than $30 million in a new batch annealing facility. With completion of this project, Stelco will now be able to offer these high-quality products to the automotive, appliance, service center and pre-painted steel markets. These products have historically commanded higher […]
The World Steel Association reports that total global crude steel production in May increased to 162.7 million metric tons (179.3 million short tons), an increase of 5.4 percent over May 2018. Leading the way was China with a 10 percent increase to 89.1 million metric tons (98.2 million short tons). Chinese production exceeded an annual […]
Construction is among the industries suffering the most from a shortage of skilled labor, yet the Trump administration excluded construction from its proposal to expand apprenticeship programs, angering the Associated General Contractors of America. “At a time when the vast majority of construction firms report having a hard time finding qualified workers to hire, it […]
U.S. Steel and ArcelorMittal USA are the latest steelmakers to announce a price increase. U.S. Steel informed customers today, June 26, that it has raised the base price for all new flat-rolled spot orders by $40 per ton ($2/cwt), effective immediately. Likewise, ArcelorMittal USA added $40 to the base price for its hot rolled, cold […]
By CRU Principal Analyst Josh Spoores Sheet prices in the U.S. have continued to fall with HR coil making a significant decline. For HR coil, CRU’s price assessment fell $34 /s.ton w/w to $505 /s.ton, the lowest price recorded since mid-November 2016. North America Our index is a volume-weighted average of actual transactions from last […]