Average mill lead times for spot orders of flat rolled steel saw little change this past week. In fact, according to Steel Market Update’s surveys of the market, lead times have moved up or down by just a day or two, depending on the product, since the beginning of the year. Lead times for steel delivery […]
Price negotiations have tightened up noticeably as the mills seek to collect the $40 price increase they announced last week. Significantly more of the service center and manufacturing executives responding to Steel Market Update’s questionnaire this week said the mills are holding the line on prices, especially for hot rolled and galvanized. In the hot […]
Last week’s price hike by the mills did little to change the outlook of most steel buyers. The majority (52 percent) of those responding to Steel Market Update’s canvass of the market this past week still believe prices will remain the same, despite the latest $40 increase announced by the mills on Feb. 27. Another […]
Ferrous scrap prices surprised to the low side in March, trading sideways to up just $10 per ton, well below initial expectations of up $10-30/GT. The mills were anticipating that higher scrap prices this month would lend support to the $40 increase in finished steel prices they announced last week. “In the Ohio Valley, obsolete […]
Raw steel production increased in all five regions of the country in the week ending Feb. 29, totaling 1,923,000 net tons, up 1.2 percent from the prior week and raising the mills to a healthy average utilization rate of 82.5 percent. The current week’s production represents a 0.3 percent increase from the same period last […]
Lourenco Goncalves is well known for speaking his mind. As an unconventional thinker and investor, he has put himself, and his company, at the center of the changes that are transforming the steel industry—and not for the first time in his career. The Chairman, President and CEO of Cleveland-Cliffs, Inc., will be a keynote speaker […]
Gauging how COVID-19 will impact global commerce, specifically the world’s steel industry, is almost as difficult to predict as the spread of the virus itself. CRU analysts will tackle the subject in a new webinar this week. As CRU Senior Analyst Erik Hedborg reports, the news is not all bad. For one, the pace of […]
The American Institute for International Steel suffered another setback in its constitutional challenge of the Trump administration’s use of Section 232 tariffs to restrict steel and aluminum imports on the basis of national security. In a ruling on Friday, the U.S. Court of Appeals rejected the claim by AIIS that the “non-delegation doctrine” makes it […]
John Packard is traveling… The mills announced another $40 increase in flat rolled prices this week in the hopes of reversing the recent downturn in steel prices. Instead of an increase, ArcelorMittal released minimum base prices of $620 for hot rolled and $820 for cold rolled and coated. Steel Market Update puts the current benchmark […]
World crude steel production totaled 154.4 million metric tons in January, a 2.1 percent increase compared to January 2019, reported the World Steel Association in Brussels. China’s crude steel production for January totaled 84.3 million tons, an increase of 7.2 percent compared to January 2019. Steel output in February will be hurt by the COVID-19 […]
Despite the dramatic impact of the COVID-19 virus on the Chinese workforce and the nation’s commerce, the China Iron and Steel Association forecasts that steel production will decrease by only 2.7 percent in the first quarter. Crude steel production has actually increased by around 3 percent in February. Analysts warn that China’s steel production is […]
Raw steel production in the week ending Feb. 22 totaled 1,901,000 net tons, a small 0.3 percent decrease from the prior week. The average mill utilization rate of 81.5 percent has fluctuated within a narrow +/-1 percent range since the beginning of the year and remains at a healthy level for the mills. Production last […]
Venture Steel is the newest member of the North American Steel Alliance (NASA), the industry’s largest purchasing co-op. Headquartered in Toronto, Venture Steel is a flat-rolled metal processor and distributor serving customers in Canada, the United States and Mexico. “Venture Steel is pleased to join NASA. We are always eager to improve our results and […]
Steel buyers sentiment, as measured by Steel Market Update, has remained relatively steady at a fairly optimistic level since the beginning of the year. But both Current and Future Sentiment have registered a very slight decline in the past few weeks. SMU’s Current Sentiment Index registered +56 this week, down from +63 at this time […]
Reliance Steel & Aluminum Co., North America’s largest metals distributor, is going after small retail customers with the launch of a new e-commerce business, FastMetals Inc. (www.fastmetals.com). Using a catalog pricing model, FastMetals offers a diverse selection of metal products including carbon, stainless, aluminum and specialty alloy steels. Located in Massillon, Ohio, FastMetals ships nationwide […]
Sky Island Capital, a Dallas-based private equity firm, has made a majority investment in Polished Metals Limited alongside the founding Lazarus family. Headquartered in Hillside, N.J., Polished Metals is one of the country’s largest polishers and suppliers of architectural and ornamental metals, offering a variety of finishes and metals to several end markets, including the […]
Mill lead times for spot orders of flat rolled steel have shortened slightly this month, though not yet enough to signal a definite trend. The current numbers suggest the mills are still maintaining relatively healthy order levels, but a change may be in the works. Lead times for steel delivery are an indicator of demand […]
Price negotiations with the mills have continued to loosen up as it’s rapidly becoming a buyer’s market. The vast majority of service center and manufacturing executives responding to Steel Market Update’s questionnaire this week said the mills are open to price negotiations on nearly all products to win the orders. In the hot rolled segment, […]
Russel Metals Inc. has named Martin Juravsky to succeed the retiring Marion Britton as the company’s next chief financial officer. Britton will remain with the company through 2020 to ensure a seamless transition. Juravsky currently serves as senior vice president and chief financial officer of Interfor Corp. with overall responsibility for their capital markets, corporate development […]
While America’s integrated steel producers are investing millions in R&D to reduce harmful emissions from their steelmaking process, the nation’s minimill steel producers have already claimed the high ground for environmental stewardship. Integrated mills and their blast furnaces heat iron ore and coking coal at high temperatures to produce high-quality virgin pig iron and steel. […]
While business activity remains fairly strong in February, distributors of galvanized products to the HVAC industry are waiting and watching for some indication of which way steel prices will move. Steel Market Update is, too. SMU has moved its Price Momentum Indicator to Neutral until the market establishes a clear direction. Steel prices have softened […]
Raw steel production in the week ending Feb. 15 totaled 1,907,000 net tons, a small 0.4 percent increase from the prior week to a strong mill utilization rate of 81.8 percent. Production last week was down 0.5 percent from the same period last year, reported the American Iron and Steel Institute. Adjusted year-to-date production through Feb. […]
Economists are fond of saying, “when the United States sneezes, the rest of the world gets a cold.” Where goes the world’s largest economy, smaller economies follow. Likewise, China, the world’s second largest economy, has come down with a particularly nasty bug that is threatening the health of global commerce. By now most are familiar […]
Steel prices finished 2019 on an upward trajectory, giving the market hope for a stronger 2020. That trend proved short-lived, however, as prices stalled in January and February, leaving both buyers and sellers wondering what to expect in the weeks and months ahead. Steel prices rose in November and December on a series of price […]
Russel Metals has remained profitable despite wild swings in steel prices caused by U.S. tariffs, coupled with weak energy prices and declining rig counts. The Canadian distributor reported net income of $77 million on revenues of $3.7 billion in full-year 2019. Results were down significantly from the prior year when the company saw a profit […]
Have steel prices peaked or do they still have some upside? That’s the question on steel buyers’ minds. Is today the time to buy or will steel be cheaper tomorrow? Information from Steel Market Update’s market trends questionnaire last week and our canvass of the market today is mixed. Steel prices rose in November and […]
Raw steel production in the week ending Feb. 8 totaled 1,899,000 net tons, a small 0.8 percent decline from the prior week, but still a healthy mill utilization rate of 81.4 percent. Production last week was down 0.9 percent from the same period last year, reported the American Iron and Steel Institute. Adjusted year-to-date production through […]
Steel buyers remain optimistic about their prospects for success, but perhaps slightly less so than in mid-January. Steel prices have seen modest declines since then, along with headlines on presidential impeachment and a deadly virus in China adding to worries about the economy. Steel Market Update’s Current Sentiment Index registered +61, down from +63 two […]
Mill lead times for spot orders of flat rolled steel extended by more than a week during last year’s fourth quarter, but so far this year have been fairly flat. The average lead time for orders of hot roll is now a bit less than five weeks, cold roll around six and a half weeks […]
Price negotiations between steelmakers and steel users have loosened considerably on most steel products. Buyers report some new wiggle room in talks over spot prices. In the hot rolled segment, nearly three out of four of the steel buyers responding to SMU’s questionnaire this week (74 percent) said the mills are now more willing to […]