The term “sustainability” is most often associated with environmentalism. True to the word, U.S. Steel’s 2019 Sustainability Report details the steelmaker’s mission to reduce its global greenhouse gas (GHG) emission intensity by 20 percent over the next decade. But what makes a company’s success “sustainable” over the long term goes far beyond environmental considerations, said […]
Steel buyers’ attitudes, as measured by Steel Market Update’s Sentiment Indexes, have improved steadily since their low point in the first week of April and are now approaching pre-coronavirus levels once again. Industry executives are clearly feeling more positive about their prospects as the economy begins to normalize. Current Sentiment has improved by 40 points […]
Steel demand is on the upswing three months after being decimated by government orders to shut down nonessential businesses and stop the spread of COVID-19. The majority of steel buyers (53 percent) responding to Steel Market update’s market trends questionnaire this past week said they are seeing improvement in demand for their products. Another 38 […]
Nucor’s Plate Mill Group informed customers on Friday that it has raised prices for carbon and alloy plate and heat-treated plate by $40 per ton, effective immediately. Nucor’s move follows a similar announcement by ArcelorMittal USA on Thursday. This is the second round of plate price changes in the past month. SSAB raised its prices […]
Lead times for spot orders of flat rolled and plate steels have extended in the past four weeks as demand has picked up and mill production has come down. In response to the COVID-19 shutdowns of nonessential businesses in March, steel producers idled furnaces to sync their output with demand. Lengthening lead times this week […]
After a brief period in which the mills tried to hold the line following their price increase announcements in May, negotiations have swung once again in buyers’ favor. Seven out of 10 buyers responding to Steel Market Update’s questionnaire this week said the mills are willing to negotiate on price to win orders of hot […]
ArcelorMittal USA informed customers today that it has raised the spot base price of all carbon, HSLA, alloy, heat treated, and specialty plate products by a minimum of $40 per ton. The increase takes effect immediately. This is the latest change to steel plate prices in the past month. SSAB raised its prices by $40 […]
Steel mill utilization by domestic producers has remained fairly stable within a tight range in the low 50s since production was curtailed in March and April due to the coronavirus. The American Iron and Steel Institute’s weekly production data shows no signs yet of the recovering economy. Steel production in the week ending June 6 […]
China’s steel exports in May decline by 23.3 percent compared with May 2019 to about 4.4 million tons. Global demand for Chinese steel products remains weak as economic activity around the world is hampered by the coronavirus. “Customers in each country are losing their willingness to buy,” said a Steel Market Update source in the […]
John Packard is working on another project. Steel prices have been on an upward trajectory, albeit a gradual one, since bottoming out in late April when the benchmark price of hot rolled hit a low of $460 per ton. The market plunged by $120 per ton in just six weeks from its mid-March high of […]
Some companies are faring better than others during the coronavirus pandemic, and ecommerce B2B platform Reibus is one of them. “Nothing much happened in the last couple weeks of March and the first couple weeks of April, but since then we have been doing great. We’re well ahead of budget for the year despite COVID-19,” […]
Ferrous scrap prices, which were widely expected to move higher again in June, traded “mostly sideways” as supplies increased while demand continued to lag, report Steel Market Update sources. In May, ferrous scrap prices settled up $30 per ton for shredded and up $40-50 per ton for busheling as coronavirus shutdowns disrupted scrap generation and […]
Mill utilization by domestic steelmakers improved slightly for the second week in a row–perhaps an early hint of an improving economy and growing demand. Steel production in the week ending May 30 totaled 1,206,000 net tons with the mills operating at an average utilization rate of 53.8 percent. Production was up 1.3 percent from the […]
Harry Moser’s phone and email have been ringing off the hook. Moser is the founder and president of the Reshoring Initiative, whose mission is to convince companies to bring manufacturing, and manufacturing jobs, back to America. Reshoring was already gaining momentum prior to the coronavirus outbreak, but the pandemic has infected the marketplace with a […]
Steel buyers’ attitudes appear to be mirroring the economy—improving in painfully slow increments as coronavirus restrictions ease and more companies get back to work. Both Current and Future Sentiment as measured by Steel Market Update saw a 14-point improvement in the past two weeks and are up more than 30 points from the lows recorded […]
Domestic steelmakers raised prices twice during the month of May, by a total of $90-100 per ton, hoping to establish a floor and set the stage for recovery in anticipation of improving demand as coronavirus restrictions ease in June and July. Service center and manufacturing executives responding to Steel Market Update’s market trends questionnaire this […]
Steel production worldwide plunged by 13 percent in April, compared with April 2019, as the coronavirus pandemic took its toll on economies all over the globe. The World Steel Association estimates that crude steel production totaled just 137.1 million metric tons last month, though it advised that the April figures are estimates due to the […]
Lead times for spot orders of flat rolled and plate steels extended during the month of May following steady declines in April as demand suffered from the government shutdowns of nonessential businesses to stem the spread of COVID-19. Lead times for steel delivery are a measure of demand at the mill level—the longer the lead […]
Negotiations between producers and buyers of flat rolled and plate steels have continued to tighten following two price increase announcements by the mills in May. However, the majority of buyers responding to Steel Market Update’s canvass of the market this week say the mills are still willing to talk price to secure orders, given the […]
Mill utilization by domestic steelmakers improved slightly in the week ending May 23 as steel production totaled 1,191,000 net tons with the mills operating at an average rate of 53.2 percent. Production was up 0.8 percent from the prior week when the utilization rate was 52.7 percent, reported the American Iron and Steel Institute. While […]
Ferrous scrap remains in limited supply, prompting predictions that scrap prices will settle still higher in June, on top of the big increase in May. Steel Market Update sources forecast an increase of $10-20 per ton for obsolete grades and $20-30 per ton for prime grades in June from May levels. Higher scrap prices may […]
Mark Bula is well known in steel circles for his role in a past startup now known as Big River Steel. Bula recently joined a new startup whose mission is not making steel, but rather making steel more safely. Bula recently accepted a position as chief strategy officer and general manager of steel for Everguard.ai, […]
While it seems counterintuitive given the difficult market conditions and weak demand due to the coronavirus, domestic steelmakers have raised flat rolled prices for the second time this month. Nucor, U.S. Steel, USS-POSCO Industries (UPI), AK Steel and NLMK USA informed customers today that prices for spot orders of hot rolled, cold rolled and coated […]
Following on Monday’s announcement by ArcelorMittal USA and SSAB Americas, Nucor informed customers on Wednesday that it has raised the price of its plate products. Nucor is seeking an additional $50 per ton ($2.50/cwt) on all orders for carbon, alloy and heat-treated plate. The other mills raised their plate price by just $40 per ton ($2.00/cwt). […]
Yesterday’s SMU Community Chat drew nearly 500 attendees to hear John Anton, associate director of the IHS Markit Pricing and Purchasing Service, give his analysis of the coronavirus pandemic’s impact on the U.S. economy and steel market. His presentation prompted nearly two dozen questions from listeners, too many to cover during the Q&A portion of […]
Alliance Steel, LLC, is open for business at its new headquarters in Gary, Ind. The company’s Bedford Park location will cease operations in mid-2020. Alliance, a leading distributor and processor of flat rolled steel, has been in operation on Chicago’s south side for 20 years. The company announced its plans to relocate to Northwest Indiana […]
While it seems counterintuitive given the difficult market conditions and weak demand due to the coronavirus, domestic steelmakers have raised flat rolled prices for the second time this month. U.S. Steel, USS-POSCO Industries (UPI) and NLMK USA informed customers today that prices for spot orders of hot rolled, cold rolled and coated products have increased […]
Now more than ever the steel industry must come together to navigate through the COVID-19 pandemic. Steel Market Update hopes to help by promoting a sense of community among producers, distributors, buyers, vendors and their customers. SMU’s Executive newsletter now includes this periodic community news roundup where we report on the human side of the pandemic. […]
Domestic steelmakers raised the spot price of plate products by $40 per ton yesterday, hoping to stem the slide and capitalize on improving demand as coronavirus restrictions ease and businesses are allowed to gradually reopen. The plate price has been trending downward this year since peaking in January at $710 per ton ($35.50/cwt). Steel Market […]
Steel demand is showing early signs of strengthening, said manufacturing and service center executives during Steel Market Update’s canvass of the market May 11-14, as officials in various states begin to ease coronavirus restrictions allowing businesses to slowly reopen. Half said demand for their products is stable or even improving, while the other half said […]