Hot rolled steel prices just keep rising. Steel Market Update puts the current benchmark price for HR at $685 per ton. How much higher can it go before correcting? Opinions vary widely. Responses to Steel Market Update’s market trends questionnaire this week indicate that a solid majority (62 percent) of industry executives believe the HR […]
Lead times for spot orders of steel continue to extend with hot rolled delivery now averaging more than six and a half weeks and coated steel orders around eight and a half weeks. Lead times are an indicator of steel demand—longer lead times mean the mills have more orders to process and are less likely […]
Signaling that the mills remain busy, lead times for delivery of spot orders continue to lengthen with hot rolled now averaging more than six and a half weeks and coated steel orders around nine weeks. Lead times are an indicator of steel demand—longer lead times mean the mills have more orders to process and are […]
Mills continue to control negotiations over hot rolled, cold rolled and coated steel orders as they seek to collect higher prices in a market characterized by extended lead times and tight supplies. About 86 percent of the hot rolled steel buyers responding to Steel Market Update’s market trends questionnaire this week said the mills are […]
Mills continue to hold the upper hand in negotiations over hot rolled, cold rolled and coated steel orders as they work to collect higher prices in a tight market with extended lead times. Buyers report the mills will only negotiate on big tonnages to be delivered in 2021. About 86 percent of the steel buyers […]
Despite some initial concern that the ferrous scrap market would dip in November, scrap dealers anticipate a “strong sideways” price trend next month. “Export sales have been voluminous over the last two weeks, and prices are now about $10 off the lowest levels they fell to over the last month or so,” said a dealer […]
Scrap pricing for November is difficult to generalize with notable regional differences, but for the most part obsolete grades have traded sideways while prime grades have seen a small increase, sources tell Steel Market Update. Scrap prices for December are widely expected to move higher, lending further support to higher finished steel prices as the […]
Ferrous scrap prices are expected to see a strong finish to 2020, say the experts, rising by an estimated $35-55/GT, lending support to finished steel prices that also continue to rise. Except for some slight weakness in October, ferrous scrap prices have moved upward for the past three months, and that trend is expected to […]
Ferrous scrap prices are expected to see a strong finish to 2020, say the experts, rising by an estimated $35-55/GT, lending support to finished steel prices that also continue to rise. Except for some slight weakness in October, ferrous scrap prices have moved upward for the past three months, and that trend is expected to […]
Ferrous scrap prices saw a big jump in December, settling up by a minimum of $70/GT, with rumored sales exceeding $100/GT, report Steel Market Update sources. Scrap prices are widely expected to see further increases in January, adding ongoing support to the uptrend in finished steel prices. Scrap for December reportedly settled in the following […]
Ferrous scrap prices are expected to trade significantly higher again in January on strong demand from mills both domestic and foreign, report Steel Market Update sources. Scrap jumped by more than $70/GT in December and the uptrend is likely to continue into the new year, lending further support to higher finished steel prices. “Like many […]
Late this week with talks ongoing, it appeared ferrous scrap prices for January would settle up by another $90-100 a ton, reported Steel Market Update sources, on top of a $70-100 a ton jump in December. Complicating negotiations were the many different settled price levels in December. January will see significant increases in all prices […]
Following big jumps in December and January, ferrous scrap prices are expected to moderate in February. Steel Market Update sources predict obsolete grades could drop by $30-50/GT and prime grades by $10-20/GT due primarily to the large amount of scrap offered to the mills in January and the weakening export market. “Scrap dealers are lowering […]
While trading was still ongoing as of Friday, it appeared ferrous scrap prices for February would settle sideways for prime grades, but down for obsoletes, as shred supplies have increased and export demand has decreased. Steel Market Update sources reported the February busheling price unchanged at around $495/GT and the shred price down by $50-60 […]
Ferrous scrap prices are expected to rise anywhere from $40-70/GT in March after declines in February, lending further support to higher finished steel prices. Scrap prices are likely rise in March by at least as much as they fell in February, said CRU Senior Analyst Ryan McKinley. “The cold snap over the last few weeks […]
The final outcome of next week’s presidential election may well boil down to the difference in turnout–in just a handful of counties in three pivotal swing states–among two key demographics: non-college-educated working class males for Trump vs. college-educated suburban women for Biden, predicts Dr. David Schultz, political analyst and professor of political science and legal […]
Weekly raw steel production by U.S. mills rose again by 0.5 percent to 1,542,000 net tons in the week ending Oct. 24. The mill operating rate hit 69.7 percent, up from 69.4 percent the week prior. Despite the steady increases over the past 20 weeks as the economy recovers from COVID, domestic steel production was still […]
The agriculture market in the Midwest is on course for a profitable year despite the historic pandemic and a historic storm earlier this summer. Farmers are in the fields more than halfway done with a successful harvest. Grain prices are decent and, combined with government subsidies, “it sounds like net farm income is going to […]
Revenues from construction and toll processing exceeded expectations in the third quarter, offsetting some of the weakness in aerospace and energy, reported Reliance Steel & Aluminum Co. in its quarterly conference call today. Touting a record gross profit margin of 32.4 percent, executives of the industry’s largest service center organization told analysts and investors they […]
2020 has been one of the most volatile years the freight markets have ever seen, but the issues of most concern to truckers remain largely the same. Retaining drivers and improving cash flow are the top two concerns among trucking companies polled this summer by industry information provider FreightWaves. “The market has experienced wild demand […]
Given all the contentious election rhetoric and concerns over the spread of COVID, industry sentiment, as measured by Steel Market Update, remains surprisingly upbeat. SMU’s Current Sentiment Index saw a 12-point jump since the beginning of October, reaching its highest reading since May 2018. Every two weeks, SMU asks steel buyers how they view their […]
About 72 percent of the service center and OEM executives polled by Steel Market Update this week said they expect the economy in 2021 to be better than 2020. The other 28 percent was evenly split between those who expect more of the same and those who see next year being even worse. No surprise, […]
SSAB Americas has announced another price increase on steel plate, informing customers Friday, Oct. 16, that it has increased transaction prices by a minimum of $50 per ton effective on all new non-contract orders. SSAB said the increase applies to As-Rolled Mill Plate, Cut-To-Length Plate >72”, Hot Rolled Coils >72”, Normalized Plate and Quenched & […]
ArcelorMittal USA has notified customers of a $50 per ton increase in the minimum base price for its plate products, following a similar announcement by SSAB Americas last week. This is the second $50 plate price increase for ArcelorMittal USA since Sept. 29, when SSAB and Nucor also announced increases. Plate prices had struggled to […]
Steel Market Update’s service center inventories data for September shows supplies on hand at very low levels. At the same time, the percentage of inventory on order is at very high levels. That suggests, say some observers, that some service centers may have waited too long to replenish their inventories, then did some panic buying […]
Have you ever attended a wedding and thought to yourself as you looked at the lovely young bride and her much older groom: “How is this going to work?” The marriage of U.S. Steel and Big River Steel is raising some of the same doubts. U.S. Steel announced today that is has exercised its option […]
Lead times for hot rolled steel now average longer than six weeks, and coated steel orders longer than eight weeks, as the mills remain busy in a market adjusting to business in a pandemic. Lead times are an indicator of steel demand—longer lead times indicate the mills have more orders to process and are less […]
Leading pipe and tube producers have announced another price increase of $50 per ton, as the cost of the flat rolled used to make tubular products continues to increase and market conditions continue to tighten. Nucor Tubular Products informed customers Tuesday, Oct. 13, that prices will increase on new orders of HSS, pipe, mechanical and […]
Nucor Tubular Products notified customers on Friday, Oct. 23, that it is increasing the pricing on all new orders for HSS, pipe, mechanical and piling products by $50 per ton. The steelmaker attributed the increase to rising raw material costs, strong demand and volatility of transportation costs. All orders booked prior to this announcement will […]
Prices of aluminum, steel’s rival material, may get a boost from a new Commerce Department ruling that accuses 18 countries of dumping common alloy aluminum sheet imports on the U.S. market. In a preliminary determination announced on Friday, Commerce ruled that aluminum sheet from the following countries has been sold at less than fair value […]