The prevailing sentiment among steel buyers remains as steadfastly positive as steel prices are steadfastly high. Steel Market Update’s Steel Buyers Sentiment Index saw only minor changes since SMU’s last check of the market. Every two weeks, SMU asks buyers how they view their company’s chances for success in the current environment, as well as […]
Buyers continue to express frustration over the hugely extended lead times for delivery of steel from the mills. One respondent to Steel Market Update’s questionnaire this week described lead times as “late, late and late. That goes for imports, too.” Added another: “Lead time is not the issue. If they deliver 2-6 weeks late, the […]
Steel Market Update’s lead times data has seen only small changes from week to week since early March. Average lead times for hot rolled steel remain highly extended at just under nine weeks, while deliveries of cold rolled and coated products now take nearly 11 weeks. Lead times are an indicator of steel demand—the longer the […]
Steel Market Update’s latest lead times data shows a significant increase in delivery times for spot orders of flat rolled and plate from the mills. The average lead time for hot rolled is now nearly 10 weeks and coated products around 12 weeks—an increase of a week or more from the last survey in mid-April. […]
It’s hard to believe that lead times could get much longer, but that appears to be the case. Steel Market Update’s latest survey data shows that flat rolled delivery times have stretched by an additional one to two weeks over the past month. Lead times are an indicator of steel demand—the longer the average lead […]
It’s hard to believe that lead times could get much longer, but that appears to be the case. Steel Market Update’s latest survey data shows that flat rolled delivery times have stretched by an additional one to two weeks over the past month. Lead times are an indicator of steel demand—the longer the average lead […]
No change to report in the latest Steel Market Update negotiations data. The dynamic between buyers and sellers remains virtually the same. “The mills don’t negotiate at all, and I don’t blame them one bit. Why should they negotiate when there isn’t enough tonnage to go around?” commented one respondent to SMU’s questionnaire this week. […]
Steel Market Update published some prices for galvanized and Galvalume steel yesterday that had not been updated. See below for the most current SMU pricing data on those products. Galvanized Coil: SMU price range is $1,480-$1,560 per net ton ($74.00-$78.00/cwt) with an average of $1,520 per ton ($76.00/cwt) FOB mill, east of the Rockies. Both […]
Ken Simonson, chief economist at the Associated General Contractors of America, will be the featured speaker during tomorrow’s SMU Community Chat beginning at 11 a.m. ET. Simonson will speak to the status of the residential, commercial and industrial construction markets and forecasts for construction in the coming months. He will also cover the most recent Data DIGest from […]
It’s time to roll back the Section 232 tariffs on steel and aluminum imports, and the Section 301 tariffs on imports from China, which are inflicting significant harm on U.S. businesses and workers, argued the National Foreign Trade Council on Wednesday in an appeal to the Biden administration. The NFTC’s briefing paper, “Why Recent Tariff […]
Ken Simonson, chief economist at the Associated General Contractors of America, will be the featured speaker at the next SMU Community Chat beginning at 11 a.m. ET on Wednesday, March 31. Simonson will speak to the status of the residential, commercial and industrial construction markets and forecasts for construction in the coming months. He will also cover […]
Ken Simonson, chief economist at the Associated General Contractors of America, will be the featured speaker at the next SMU Community Chat beginning at 11 a.m. ET on Wednesday, March 31. Simonson will speak to the status of the residential, commercial and industrial construction markets and forecasts for construction in the coming months. He will also cover […]
Sky-high prices not just for steel, but for construction materials of all kinds, are threatening the prospects for construction demand. And federal infrastructure spending proposed by the Biden administration could carry an even heftier price tag for taxpayers. The Associated General Contractors of America reports that the construction industry is experiencing an unprecedented mix of […]
In the famous words of Isaac Newton, “what goes up must come down.” While he was not referring to steel prices per se, the sentiment still holds true. Steel tags can’t stay at record highs indefinitely. Supply will eventually catch up with demand. What happens then? Will prices see a sharp correction or a gradual […]
In the famous words of Isaac Newton, “what goes up must come down.” While he was not referring to steel prices per se, the sentiment still holds true. Steel tags can’t stay at record highs indefinitely. Supply will eventually catch up with demand. What happens then? Will prices see a sharp correction or a gradual […]
I lost a million-dollar bet to my grandson the other day. Turns out I can’t touch my nose with my big toe like he can. I paid him promptly, per my terms of our wager—one dollar a year for a million years. Plus a cookie as interest. He seemed satisfied. He’s three. During its earnings […]
U.S. steel producers, facing intensifying criticism from steel consumers over record-high steel prices, were quick to point to a new report this week from the Economic Policy Institute, which concludes that the Trump-era Section 232 tariffs have been an effective deterrent to unfair imports and should be continued by the Biden administration. The Steel Manufacturers […]
Ken Simonson, chief economist at the Associated General Contractors of America, will be the featured speaker at the next SMU Community Chat beginning at 11 a.m. ET on Wednesday, March 31. Simonson will speak to the status of the residential, commercial and industrial construction markets and forecasts for construction in the coming months. He will also cover […]
Ken Simonson, chief economist at the Associated General Contractors of America, will be the featured speaker at the next SMU Community Chat beginning at 11 a.m. ET on Wednesday, March 31. Simonson will speak to the status of the residential, commercial and industrial construction markets and forecasts for construction in the coming months. He will also cover […]
Mill Steel Co. has strengthened its geographic footprint in the South and West with the acquisition of Los Angeles-based Prassas Metal Products. Terms of the transaction were not disclosed. “When favorable opportunities such as this present, our aggressive acquisition strategy allows us to transact quickly to the benefit of our customers,” said Mill Steel President […]
Steel buyers are considerably more confident of their near-term than their future prospects, according to the latest findings from Steel Market Update. Every two weeks, SMU asks buyers how they view their company’s chances for success in the current environment, as well as three to six months in the future. SMU’s Current Buyers Sentiment Index […]
Steel Dynamics Inc. forecast higher first- and second-quarter results, fueled by strong shipments and record steel prices, according to guidance issued Wednesday. “First-quarter 2021 profitability from the company’s steel operations is expected to be significantly higher than sequential fourth-quarter results, driven by flat roll metal spread expansion, as strong demand continues to support flat roll steel prices,” […]
Lead times for spot orders of most steel products appear to have leveled off a bit in the past two weeks, based on Steel Market Update’s latest check of the market. All flat rolled and plate products registered small declines except for Galvalume, which was the only one to see an increase in delivery times […]
The mills are still comfortably in the driver’s seat when it comes to steel price negotiations. More than 90 percent of the buyers responding to Steel Market Update’s questionnaire this week reported that the flat roll and plate mills are unwilling to talk price on steel orders. The only notable changes in the data this […]
Now that the presidential election is behind us, Congress has passed an historic stimulus package and there is light at the end of the pandemic tunnel as the vaccines proliferate, executives at Klöckner & Co. look forward to a stronger year for steel, especially for demand in the second half. “We expect the $1.9 trillion […]
The adverse effects on markets resulting from the COVID-19 pandemic led to a 19% decline in Klöckner & Co.’s sales in fiscal year 2020, to about 5.1 billion euros or $6.1 billion U.S., the company reported Wednesday. One of the largest steel distributors in Europe and North America, Klöckner reported a net loss of 114 […]
Steel Buyers Sentiment, as measured by Steel Market Update, has seen little change since the beginning of February, recording a very optimistic reading of +69 this week. Future Sentiment moved up four points to a nearly as bullish +67. Both Current and Future Sentiment now exceed pre-pandemic levels and suggest that the market is hopeful […]
As expected, ferrous scrap prices for March settled up $50 per ton for obsolete grades and up $70 per ton for prime grades in most parts of the U.S., reported Steel Market Update sources. April scrap is likely to remain relatively unchanged. “Looking forward, I don’t see downside for prime grades in April. Depending on […]
Obsolete scrap prices are widely expected to decline in April, while prime scrap prices move sideways, predict Steel Market Update sources. Ferrous scrap prices saw a big jump in March, adding to the upward momentum on finished steel prices, but the April effect is shaping up to be more moderate. “Growing obsolete scrap availability caused […]
Ferrous scrap prices have traded flat to down in April following a big jump in March. Steel Market Update sources report the price for obsolete grades down $20/GT, while prime grades traded sideways. The price for shredded scrap is about $430/GT delivered to the mills in the Midwest and South. Prime grades are around $130-140 […]