Iron ore trade on the Great Lakes felt the “pinch of COVID-19” during 2020, plummeting 30 percent from its normal levels, reported the Lake Carriers Association. The pandemic hit just as crews were readying ore vessels for the new shipping season in March. No plans were in place to guide maritime shipping. “The United States Coast […]
Steel Dynamics’ CEO Mark Millett was upbeat on the prospects for steel demand in the fourth quarter and beyond. “You can clearly see what is happening in the marketplace through one’s order book—ours is in pretty good shape,” said Millett. Flat rolled demand and momentum remain strong, inventories are at historical lows, imports continue to […]
Housing starts continued to grow in September supported by strong interest in single-family home construction. Housing starts climbed 1.9 percent from August and 11.1 percent from a year ago to a seasonally adjusted annual rate of 1,415,000, reported the U.S. Department of Housing and Urban Development and the U.S. Census Bureau. Single-family starts leapt 8.5 […]
North American freight volumes are almost back to 2019 levels, says Cass Information Systems. The September Cass Freight Index for shipments rose 7.1 percent from August to September and was just 1.8 percent below last year’s levels. The index recovered 27.6 percent since reaching a low in April. Cass expects shipments to remain strong through […]
Resilient construction demand enabled Commercial Metals Company to weather the COVID-19 crisis without disruption to productivity. CMC’s fourth-quarter FY 2020 earnings totaled $67.8 million, a 6.5 percent increase from the third quarter. Consolidated net sales totaled $1.4 billion, with sequential increases in both the North America and Europe segments. Net sales for the year reached […]
Ford has selected ArcelorMittal and its Fortiform 980 GI steel as its sole source of third-generation advanced high-strength steel for use in the 2021 Ford Bronco. The steel is produced at AM/NS Calvert and is designed for automotive application due to its strength and formability. “Ford called us to see if we could develop this […]
Manufacturing activity continued to expand in New York during October, but at a slower pace. The Empire State Manufacturing Survey general business index slipped seven points to 10.5, decreasing more than expected by analysts. New orders and shipments continued to expand and unfilled orders declined. Inventories were a little leaner and delivery times remained steady. […]
Canadian steel producer Stelco has completed the upgrade and reline of the blast furnace at Lake Erie Works and has commenced production. The upgrade will improve quality and increase metal production by up to 300,000 net tons per year and reduce costs to produce steel coils by CAD $30 ($22.84 U.S.) per ton. “We are […]
Nippon Steel & Sumitomo Metal Corp. is considering selling its shares of I/N Tek and I/N Kote, rolling and galvanizing plants held in a 50-50 joint venture with ArcelorMittal, to Cleveland-Cliffs. Cliffs acquired ArcelorMittal’s shares of the two plants in New Carlisle, Ind., in a deal for the company’s U.S. assets last month. Nippon Steel […]
Sales at NLMK USA plunged 33 percent year-over-year in the third quarter of 2020 due to lower production resulting from the strike at NLMK Pennsylvania. Compared to the previous quarter, USA sales jumped 11 percent to 370,000 metric tons following the completion of repairs at NLMK Indiana and recovery in steel demand. Weak steel consumption […]
The 2020 pandemic has caused more disruption to the global energy sector than any other event in recent history, says the International Energy Agency in its newest World Energy Outlook. “Whether this upheaval ultimately helps or hinders efforts to accelerate clean energy transitions and reach international energy and climate goals will depend on how governments […]
The former AK Steel site near Kansas City is the location for a new Missouri River intermodal terminal thanks to a $9.88 million grant from the U.S. Department of Transportation to the Kansas City Port Authority. “Kansas City is already a major freight hub for the central United States, and this grant will help us […]
Majestic Steel will be the presenting sponsor for the Sixth Annual Wine, Women & Shoes Gala to benefit Ronald McDonald House of Cleveland. Majestic Steel is a long-time supporter of RMHC, which provides critical support and medical services for families impacted by catastrophic illnesses or injuries. The Wine, Women & Shoes gala will be virtual […]
The Cleveland-Cliffs/ArcelorMittal merger may throw a curve at the Steelmageddon theory, said Bank of America steel analyst Timna Tanners during Wednesday’s Steel Market Update Community Chat Webinar. The Cliffs/AM combination includes two mills that are more than 100 years old and another that is 50 years old. A move by Cliffs to permanently close some older blast […]
Nonresidential construction projects in planning rose in September. The Dodge Momentum Index gained 3.7 percent, climbing to 130.8 last month. Planning for commercial projects jumped 3.9 percent, while institutional projects moved 3.2 percent higher. The index has increased at a slow and steady pace since its low point in June, gaining 2.2 percent in the […]
Workers at NLMK Pennsylvania in Farrell, Pa., are in their seventh week of a strike over healthcare and what they claim are unfair labor practices with little progress evident in negotiations. NLMK released a video for employees on Oct. 1 to explain the structure of the proposed new health plan and the savings for workers […]
The World Trade Organization has adjusted its outlook on world trade volume to a more optimistic view. In its latest report, the WTO forecast global trade volume to fall 9.2 percent in 2020 instead of 12.9 percent as predicted in the April trade forecast. Trade volume will rebound in 2021 to 7.2 percent, but remain […]
The COVID-19 pandemic has heightened the United States’ awareness of its economic and security risks, said U.S. Steel President and CEO David Burritt, in an op-ed published by Fox Business. “Key among these risks: the hidden cost of our country’s high dependence on the global supply chain.” As the coronavirus took hold globally, critical supplies […]
The Organization for Economic Co-operation and Development’s Steel Committee expressed concern over unbalanced steel market conditions in a new report following its 88th Session last week. Steel capacity continues to increase despite a slump in demand caused by the global pandemic. The OECD says global steelmaking capacity is expected to increase to 2,455.8 million metric tons […]
Dry bulk carriers followed a bit behind their container ship counterparts but are now rebounding in a colossal way. Dry bulk shipping jumped to a new high for the year on Monday with rates at $34,293 per day compared to under $5,000 per day through the first and second quarters. Rates were 127 percent higher […]
Swedish initiative HYBRIT has received $2.5 million from the Swedish Energy Agency for a comprehensive study of steelmaking using hydrogen for the direct-reduction of iron ore. HYBRIT is a collaboration of steelmaker SSAB, iron ore producer LKAB, and electricity producer Vattenfall. HYBRIT seeks to replace coking coal used in ore-based steel making with hydrogen to create steel with […]
With a presidential election on the horizon, the AIST Town Hall Forum asked steel executives how a new administration may affect the steel industry and trade. “I continue to expect bipartisan support in Washington for American workers, American steelmaking, regardless of who is in the White House,” said U.S. Steel CEO Dave Burritt. “But I […]
The auto industry is expected to continue its quick pace to recovery with third-quarter retail sales up 27 percent from the second quarter of 2020, forecasts Tru Car and its subsidiary ALG, Inc. Sales in September are forecast to reach 1,221,092 units, down 12 percent from a year ago and down 4 percent from August […]
Global manufacturing continued its road to recovery in September. The J.P. Morgan Global Manufacturing PMI rose to a 25-month high of 52.3 from 51.8 in August, for a third consecutive month of expansion. All of the index components were solidly above the 50 neutral point except for employment, which posted a PMI of 49.5. A […]
Recovery, fundamental, opportunity, strategic, exciting. These are the five words steel executives used during AIST’s Virtual Town Hall Forum Wednesday to describe the current state of steel. In the aftermath of an unprecedented upheaval for the economy and the industry caused by the COVID-19 crisis, executives from Big River Steel, Cleveland-Cliffs, Nucor, Steel Dynamics and […]
The manufacturing sector grew again in September, indicating a fifth month of expansion for the economy, according to the latest Manufacturing ISM Report on Business. The September PMI registered 55.4 percent, down 0.6 percent from August. “Manufacturing performed well in the month with demand, consumption and inputs registering growth indicative of a normal expansion cycle,” […]
Construction spending rose 1.4 percent in August primarily due to a robust residential construction sector, said the Associated General Contractors of America. AGC cautioned that without federal support, nonresidential construction will continue to stagnate. “The August spending report shows a stark divide between housing and nonresidential markets that appears likely to widen over the coming […]
Construction jobs in metro areas fell by two-thirds from August 2019 to August 2020, said the Associated General Contractors of America in their latest analysis of government data. Construction employment decreased in 241, or 67 percent, of 358 metro areas during the period. “Although residential construction is picking up in many areas, public and nonresidential […]
Business activity in the Chicago area surged in September, expanding for the third month in a row. The MNI Chicago Business Barometer soared 11.2 points to 62.4, its highest level since December 2018. Business sentiment jumped sharply to 55.2, its best performance since Q1 2019. Production jumped 16 points, nearing a two-year high, while demand […]
An explosion at ArcelorMittal Dofasco’s Machine Shop complex on Thursday afternoon destroyed a stress relieving furnace near the welding shop. The explosion was heard by the neighboring areas, but there was no offsite impact or serious injuries to Dofasco team members, the company said. Said spokesperson Marie Verdun in a statement to SMU: “We experienced […]