Using U.S. International Trade Commission (USITC) data, Steel Market Update has broken down the import tonnage of cold rolled sheet into coil and leveled, four thickness ranges, and how much was full hard, annealed and high strength. This update examines the total cold rolled sheet and strip imports into the U.S. for 2019 as a […]
In the course of 2019, imports of hot rolled coil into the Gulf had declined to almost zero by December. SMU presents a comprehensive series of import reports ranging from the first look at licensed data to the detailed look at volume by district of entry and source nation. The report you are reading now […]
Editor’s note: This article is reprinted from last week’s Premium issue with corrected charts. In 2019 the imports of cold rolled sheet into the Gulf and Great Lakes moved dramatically in opposite directions. SMU presents a comprehensive series of import reports ranging from the first look at licensed data to the detailed look at volume […]
In 2019, imports of hot dipped galvanized sheet into the Great Lakes represented more than half the national total, and this was one of only two regions to experience an increase in 2019. SMU presents a comprehensive series of import reports ranging from the first look at licensed data to the detailed look at volume […]
In 2019, most of the imports of other metallic coated sheet (mainly Galvalume) came into the Gulf, but that volume has declined as the Great Lakes volume has increased. SMU presents a comprehensive series of import reports ranging from the first look at licensed data to the detailed look at volume by district of entry […]
In 2019, imports of cold rolled plate declined in all regions, and the Great Lakes accounted for 69.2 percentage of the total national tonnage. SMU presents a comprehensive series of import reports ranging from the first look at licensed data to the very detailed look at volume by district of entry and source nation. The […]
In 2019, imports of cut to length plate declined in all regions except the Gulf, which increased by 45.1 percent. SMU presents a comprehensive series of import reports ranging from the first look at licensed data to the detailed look at volume by district of entry and source nation. The report you are reading now […]
In February, job creation beat expectations, and there is no sign of a virus effect even in the details. Net job creation in February was a surprising 273,000. In addition, December was revised up by 37,000 and January up by 48,000. Rising employment and wages are the main contributors to GDP growth because personal consumption […]
February’s employment report showed a turnaround in manufacturing, while construction continued to boom. The net increase in employed persons was 273,000 in February, the same as an upwardly revised result for January. In February, 42,000 jobs were created in construction and 15,000 jobs in manufacturing. The private sector gained 228,000 jobs in February and government […]
Imports of rolled products have declined every month since May 2018 year over year with the greatest declines in each month December 2019 through February 2020. Total rolled product imports in February were down by 26.7 percent on a three-month moving average (3MMA) basis. This follows the 26.3 percent decrease in December and 29.6 percent […]
In spite of the widely reported decline in import volume, import market share increased in the second quarter. Last week we reported that June was the eighth consecutive month in which imports were down by more than 20 percent compared to the same month last year. This has not been the case for import market […]
This report examines the import share of sheet, plate, long and tubular products and 16 subcategories. Since January 2020, imports’ share of the total sheet products has been 14.5 percent, down from 21.4 percent in 2015. The import share of HRC has been below 10 percent since January 2019. The most striking finding in this […]
In January, total construction continued to boom with a 5.1 percent year-over-year growth rate Total construction is enjoying a remarkable turnaround with positive momentum in all sectors. The January results for total construction spending yielded the best growth rate for 15 months. Growth is being led by state and locally funded work including infrastructure, but […]
Steel Market Update is pleased to share this Premium content with Executive members. For more information on upgrading to a Premium-level subscription, email Info@SteelMarketUpdate.com. The Conference Board report of consumer confidence through mid-February does not reveal undue concern about the coronavirus, but that will change rapidly if the news continues to worsen. The composite value […]
Key Market Indicators show that the improvement in market trends in December and January translated to a jump in the present situation in February. This report is designed to be a big picture summary of data on which we have reported in detail during the month. In it we summarize 36 data streams that describe […]
Raw materials prices have been negatively impacted by the coronavirus outbreak in China. Table 1 summarizes the price changes through Feb. 19 of the five materials considered in this analysis. It reports the month/month, 3 months/3 months and 12 months/12 months changes on a percentage basis. In the last 30 days, the prices of iron […]
This report is based on data from LMC Automotive for automotive assemblies in the U.S., Canada and Mexico. The breakdown of assemblies is “Personal” (cars for personal use) and “Commercial” (light vehicles less than 6.0 tonnes gross vehicle weight rating, heavy trucks and buses are not included). In this report we will briefly describe light […]
Domestic mills won back market share from imports in 2017, 2018 and 2019. Even though the steel market contracted by 1.9 percent in 2019, shipments by U.S. mills to domestic locations increased by 2.9 percent as imports declined. Table 1 shows 13 years of history of total steel supply to the U.S. market in short […]
If the coronavirus leads to a global pandemic, it will severely disrupt steel production. Figure 1 shows annualized monthly global steel production on a three-month moving average (3MMA) basis and capacity utilization since January 2000. Based on OECD data (see below), the 3MMA for capacity utilization in January was 83.0 percent, down from 88.2 percent […]
Steel Market Update is pleased to share this Premium content with Executive-level members. For more information on how to upgrade to a Premium-level subscription, email Info@SteelMarketUpdate.com. Oil and gas prices declined from our previous update. The spot price of West Texas Intermediate (WTI) FOB Cushing, Okla., was $49.59 on Feb. 10, down from $58.17/ barrel in […]
Based on our analysis of 10 economic indicators, the decline in manufacturing slowed in February’s data. This report summarizes 10 data streams that describe the state of U.S. manufacturing in general and the steel industry in particular. We have reported on most of these separately in our Steel Market Update publications, and therefore will be […]
In this report we examine the change in currency values of the 16 pre-eminent global steel and iron ore trading nations. The U.S. dollar has strengthened against 10 of the 16 currencies in the last three months. In January we replaced the British pound in this report with the Vietnamese dong in recognition that Vietnam […]
In three months through December, demand for total rolled products declined by 6.1 percent. This Premium analysis by Steel Market Update is based on steel mill shipment data from the American Iron and Steel Institute (AISI) and import-export data from the U.S. Department of Commerce (DOC). It is meant as a more in-depth look compared […]
This report examines the import share of sheet, plate, long and tubular products and 16 subcategories. Since January 2019, the import market share of total sheet products has been below 15 percent with an 11-month average of 14.0 percent. The import share of HRC has been below 10 percent since January 2019. The most striking […]
Steel Market Update is pleased to share this Premium content with Executive members. For more information on upgrading to a Premium-level subscription, email Info@SteelMarketUpdate.com. This analysis breaks down the imported tonnage of six flat rolled products into their district of entry and source nation. We believe that misinformation (or lack of) about local import volume […]
Net job creation in January was an encouraging 225,000, up from 147,000 in November, but down from the exceptional result of 261,000 in October. In the January report, the Bureau of Labor Statistics (BLS) made substantial historical revisions. In this SMU analysis, we revised our data back to January 2017. Rising employment and wages are […]
January’s employment report was a downer for manufacturing, but construction was particularly strong. The net increase in employed persons was 225,000 in January, of which 108,000 were in health, education and leisure activities. In January, 44,000 jobs were created in construction and 12,000 jobs lost in manufacturing. The private sector gained 206,000 jobs in January […]
Imports of steel rolled products have declined every month since May 2018, year over year, with the greatest decline in January 2020, according to government data. Total rolled product imports in January were down by 35.5 percent on a three-month moving average (3MMA) basis. This follows the 27.8 percent decrease in November on the same […]
Steel Market Update is pleased to share this Premium content with Executive members. For more information on how to upgrade to a Premium-level subscription, email Info@SteelMarketUpdate.com. The November and December results for construction spending are suggesting a turnaround. December’s growth rate was the best in the past 13 months. The growth of private construction almost […]
Key Market Indicators show that the improvement in market trends that occurred in December continued into January. This report is designed to be a big picture summary of data SMU has reported in detail during the month. It summarizes 36 data streams that describe the state of the steel market and provide forward guidance for […]