This analysis breaks down the imported tonnage of six flat rolled products into the district of entry and the source nation, describing in detail what is going on in a company’s immediate neighborhood, thus providing a negotiating advantage in purchasing decisions for Premium subscibers. Premium members will find reports on our website that break down […]
The U.S. dollar weakened against 13 of the 16 steel and raw materials trading nation currencies in the last 30 days, which follows a decline against 11 in our previous report. The biggest change was in the value of the Brazilian real, which led the pack of strengthening currencies. Experts suggest that the coronavirus pandemic […]
Census Bureau data for downstream steel product shipments lags but supports American Iron and Steel Institute (AISI) data for crude steel production. The Census Bureau provides monthly data on manufacturing inventories, shipments and new orders for total U.S. manufacturing and for individual industries, one of which is steel products. Therefore, the Census Bureau provides a […]
There was positive net job creation in May following April’s disastrous report. The May jobs report was released by the Bureau of Labor Statistics on Friday, after which the N.Y. Times reported: “Employers added 2.5 million jobs in May, defying economists’ expectations of further losses and offering hope that the rebound from the pandemic-induced economic […]
Imports of rolled products through May, year over year, were not affected by the pandemic, but the longer-term decline continued, according to the latest Commerce Department data. Year over year, total rolled product imports in May were down by 24.8 percent on a three-month moving average (3MMA) basis. This was the seventh consecutive month where […]
In May, manufacturing gained back 17 percent of April’s job losses, while construction gained back 47 percent, according to the latest Bureau of Labor Statistics data. The net change in employed persons was negative 20.7 million in April and positive 2.5 million in May. Table 1 breaks total employment down into service and goods-producing industries […]
Total U.S. construction declined by 2.9 percent in April, compared with March, on a seasonally adjusted basis. On a non-adjusted basis, data for April had a positive growth of 2.3 percent, which was unusually low for this time of year. Normally April expenditures are about 8 percent higher than March. On a year-over-year basis and […]
Steel Market Update is pleased to share this Premium content with Executive members. For information on how to upgrade to a Premium-level subscription, email Info@SteelMarketUpdate.com. Global steel production in April, excluding China, was hit hard by the coronavirus pandemic. But by April, China was two months into a recovery. China produced a record 62 percent […]
The U.S. dollar weakened against 11 of the 16 steel trading nation currencies in the last 30 days, through May 18. The biggest change was that the Brazilian real headed in the other direction and declined by 9.2 percent. The effect of the coronavirus pandemic was not evident at the three-month level when the dollar […]
Premium subscribers to Steel Market Update have reports available on our website that break out the import tonnage into district of entry and source nation for six sheet and plate product categories. This report takes the total national tonnage of hot rolled and breaks it down into product detail. Using U.S. International Trade Commission (USITC) […]
Using International Trade Commission (USITC) data, Steel Market Update has taken the import tonnage of cold rolled sheet and broken it down into coil and leveled, into four thickness ranges, and identifies how much was full hard, annealed and high strength. This update examines the total cold rolled sheet and strip imports into the U.S. […]
The analysis breaks down the imported tonnage of six flat rolled products into the district of entry and the source nation. We believe that misinformation (or lack of) about local import volume is often used to influence purchase decisions. Our intent with this analysis is to describe in detail what is going on in a […]
The U.S. dollar strengthened against 14 of the 16 steel and raw materials trading nation currencies in the last three months and also in the last month. There was a turnaround in the last seven days when the dollar weakened against 14 of the 16. In the last three months, the currencies of Brazil, Mexico, […]
Steel Market Update is please to share this Premium content with Executive members. For information on how to upgrade to a Premium subscription, email Info@SteelMarketUpdate.com. Total rolled product imports in March were down by 25.6 percent on a three-month moving average (3MMA) basis year over year. This was the fifth consecutive month where imports were […]
Total rolled product imports in April were down by 26.3 percent year over year on a three-month moving average (3MMA) basis. This was the sixth consecutive month where imports declined by more than 20 percent compared to the same month last year. This early look at April’s import volume is based on Commerce Department license […]
Steel Market Update’s monthly analysis of Key Market Indicators has done a good job of anticipating the ups and downs of the steel market in the past, but the economic data currently available seriously lags the impact of the coronavirus on the economy. Only 3 of 36 indicators in this month’s report have even begun […]
The employment situation in the U.S. is a disaster. The current economic situation is so extraordinarily dire that historical data and trend analysis is almost irrelevant except to illustrate the severity of the situation we are all experiencing. Net job creation in March was negative 701,000 and January was revised down by 59,000, according to […]
We’re all saturated with news of the employment disaster caused by the coronavirus, but to look at the long-term picture graphically is still shocking. Figure 1 shows the three-month moving average (3MMA) of the number of jobs created or lost through April since 2005 as the brown bars and the total number employed as the […]
The U.S. lost a net 701,000 jobs in March as the economy struggled with the coronavirus, and the labor situation is expected to be much worse in April. The brunt of March’s employment decline was felt by service industries. In the coming months, manufacturing and construction jobs will suffer more as well. Table 1 breaks […]
More than 20.5 million Americans lost their jobs in April, including 18.1 million in service industries and 2.4 million in goods-producing industries such as manufacturing and construction, according to data just released by the Bureau of Labor Statistics. The latest job losses came on top of 870,000 lost in March, following a gain of 230,000 […]
Global steel production was relatively strong in February, but that was before the coronavirus really began to slow the economy. The IMF projects that the impending global recession will be as bad or worse than the global financial crisis a decade ago . Figure 1 shows annualized monthly global steel production on a three-month moving […]
Raw materials prices are poised for a rapid decline as the dollar strengthens and the global economy slumps. Table 1 summarizes the price changes through March 18 of the five materials considered in this analysis. It reports the month/month, 3 months/3 months and 12 months/12 months changes on a percentage basis. This is likely our […]
Global scrap trade has been trending down for two years and in Q4 2019 the U.S. share increased to 26.8 percent, the highest since Q1 2013. This is a quarterly analysis using data from the Iron and Steel Statistics Bureau (ISSB) in the UK. Some nations are slow to report, which results in the analysis […]
The West Texas Intermediate crude price has fallen through $30 per barrel for the first time since September 2003. Normally our price data comes from the Energy Information Administration (EIA), but their data is not keeping up with today’s collapsing market. Their latest was March 6 when they published a price of $42.24 per barrel […]
The currencies of the commodity dependent nations have crashed in a flight to the safe haven of the U.S. dollar. The U.S. dollar strengthened against 13 of the 16 steel and raw materials trading nation currencies in the last three months. In the last 30 days, the currencies of Brazil, Mexico and Russia were down […]
In the last 12 months, the price declines of cold rolled carbon steel and aluminum sheet have been similar. This report is an analysis of Bureau of Labor Statistics data and is intended to provide subscribers with a view of the competitive position of sheet steel, aluminum, plastic and wood. The analysis includes some downstream […]
In the last 12 months the competitive position of steel sheet has improved against aluminum, plastic and wood. This report is an analysis of Bureau of Labor Statistics data and is intended to provide subscribers with a view of where sheet steel stands in terms of pricing compared with aluminum, plastic and wood. The analysis […]
Mill shipments of sheet products in January were the highest since August 2019. This analysis is based on steel mill shipment data from the American Iron and Steel Institute (AISI) and import-export data from the U.S. Department of Commerce (DoC). This month we are producing a new report for long products and will follow this […]
Demand for long products declined by 3.5 percent in the three months through January, but rebar was up by 9.6 percent. This analysis is based on steel mill shipment data from the American Iron and Steel Institute (AISI) and import-export data from the U.S. Department of Commerce (DoC). It summarizes total steel supply by product […]
Premium subscribers to Steel Market Update have access to reports on our website that break out the import tonnage into district of entry and source nation for six sheet and plate product categories. This report takes the total national tonnage of hot rolled and breaks it down into product detail. Using U.S. International Trade Commission […]