Buyers and sellers of flat rolled steel reported to Steel Market Update this past week that the domestic steel mills are less willing to negotiate steel prices. We believe this is due to strengthening order books, extending lead times, positive Sentiment and improving demand. In fact, we were learning throughout the day today that many […]
We have received a number of calls from sellers of steel asking for our help in trying to explain, from an independent source, why flat rolled steel prices are moving higher and why we expect this trend to continue. When looking at the history of Steel Market Update, our steel market intelligence publication was actually […]
With lead times extended and supply constrained any surprise outages, or the rumor of an outage, could have a dramatic impact on an already spooked flat rolled market. On Sunday, US Steel suffered a short term unexpected outage on their largest blast furnace, #14 at Gary Works. The two day outage is projected to have […]
Late in the day we received notification that Evraz Flat Rolled Group has advised their customers of their intention to take transactional prices (spot) up by a minimum of $50 per ton. One of the more interesting comments I got today was from a Chicago based service center who reported being asked if he could […]
NLMK USA is the first domestic steel mill to announce a $40 per ton price increase on hot rolled, cold rolled and galvanized steels sold into the spot markets. This is now the fifth steel price increase announcement made since early December. In a letter to their customers, NLMK USA Executive Vice President, James Banker, […]
Flat rolled prices continue to tighten and lead times continue to be extended, based on our analysis of the flat rolled steel markets and pricing this week. Buyers are reporting a shrinking of the range of offers available out there. So, even though we have a range of $440-$460 per ton on hot rolled, we […]
On Friday and Saturday of this past week, Steel Market Update attended the Association of Steel Distributors spring meeting. The following are some of the notes made during the presentations and during discussions with ASD members. Dr. Chris Kuehl of Armada Corporate Intelligence reported that he is “a little optimistic” when it comes to the […]
NLMK USA was the first mill to raise prices, going up $40 per ton. I am hearing comments from both sides on whether the price increases are a good or bad thing. My personal opinion is prices got a little “over-done” last year and dropped too low. A hot rolled number closer to $500 may […]
Supply of ferrous scrap continues to be an issue for the domestic steel mills. On Friday of this past week scrap prices settled in the Detroit market up $50 per gross ton. However, many of our scrap sources are advising that the rest of the country is in limbo as many dealers think the market […]
According to ArcelorMittal USA comments made during the Association of Steel Distributors meeting over the weekend which SMU attended, a trade case on steel plate imports will be filed within the next few weeks. ArcelorMittal along with Nucor and SSAB have been working on the documentation for an extended period of time and our understanding […]
Flat rolled steel prices continue to climb and there is quite a range out there when looking at the various indices. It is SMU opinion that the variances are due to collection techniques and the amount of data available to any specific index at the time they produce their numbers. SMU and Platts take into […]
We know our readers enjoy hearing comments from those with whom we speak on a regular basis regarding market trends and pricing. We have had an active week heading into the first full week of April so here are some of the things our readers and sources are talking about during the last week of […]
We have been asked about the possible restart of the blast furnace at AK Steel or the furnaces at Granite City as steel prices rise and lead times remain extended. We spoke with a couple of analysts over the weekend who told us they did not see the AK Steel furnace running at any point […]
When it comes to foreign steel and foreign steel offers, what was true two weeks ago is no longer, according to the trading companies we spoke with over the past 24 hours. We spoke with a trading company about the light gauge galvanized business and we were told, “Four offers were pulled just last night.” […]
The following article on the hot rolled coil (HRC), busheling scrap (BUS), and financial futures markets was written by Dave Feldstein. As Flack Steel’s director of risk management, David Feldstein is an active participant in the hot rolled coil (HRC) futures market and we believe he will provide insightful commentary and trading ideas to our […]
March saw flat rolled steel prices rising throughout the month. SMU benchmark hot rolled average for the month was $427 per ton. This was slightly lower than Platts which revised their HRC number on the 30th which took their average up to $432 per ton. Both Platts and SMU monthly averages were higher than the […]
Good evening from Naples, Florida (warm, sunny) where the Association of Steel Distributors is holding its Spring Meeting. I am looking forward to the business meeting portion and presentations which will be coming on Friday and Saturday. I will report on what I learn in Sunday evening’s edition of Steel Market Update. The sense or […]
Flat rolled steel prices continue to firm and many buyers are convinced there could be more price increases to come with a tightening foreign market and higher offers for foreign steel coupled with the expectation that ferrous scrap prices will increase by a minimum of $30 per gross ton for April delivery. SMU has been […]
When looking at the import license data it is important to put the data into some sort of context. At this time, SMU expects March 2016 foreign steel imports to total 2.4-2.6 million tons. If correct, March foreign steel imports would be higher than the month of February Preliminary Census numbers by approximately 300,000 tons. […]
Due to the Easter Holiday we did not publish our Comparison Price Indices article over the weekend. However, you didn’t miss anything as here is what we are seeing for hot rolled, cold rolled, coated products and plate from the indexes we followed this past week. Last week hot rolled moved higher by $10 per […]
SMU still has a number of open spots available for our next Steel 101: Introduction to Steel Making & Market Fundamentals workshop. The workshop will be held just outside of Toledo, Ohio as part of our program will be a tour of one of the most successful flat rolled mini-mills in the United States, the […]
Flat rolled steel pricing momentum is clearly on the side of the domestic steel mills. You have a number of the integrated mills essentially out of the spot markets and lead times are extended. Even hot rolled lead times are moving out despite weakness in the energy markets. SMU Price Momentum Indicator continues to point […]
Steel Market Update ferrous scrap sources are advising us that scrap prices are poised to move $30 to $50 per gross ton higher for April deliveries than what we saw negotiated at the beginning of March. The issue is supply. The domestic sheet mills are having issues finding all of the tonnage they need and […]
As we head into the Good Friday and Easter weekend holiday we want to wish everyone an enjoyable time with family and friends. Steel Market Update will not publish a newsletter on Sunday so our next official publication will be on Tuesday evening of next week. Even so, that should not prevent you for communicating […]
Flat rolled steel buyers are telling Steel Market Update that the domestic mills are getting more aggressive about collecting all, or at least a portion of the latest price increase. Hot rolled continues to be the weakest product, but even in HRC we are seeing the numbers starting to move and we expect them to […]
AK Steel followed the rest of the steel mills as they announced a $30 per ton price increase just 17 days after announcing their last flat rolled increase. This is the third price increase out of AK Steel so far this year. With the latest round of increases, AK Steel minimum base price levels are: […]
There have been four price announcements on flat rolled steel beginning in early December 2015. The first increase was for $40 per ton followed by a succession of $30 per ton announcements. The total of the four announcements is $130 per ton or, $6.50/cwt. Looking at the galvanized markets, when the first price increase was […]
“Welcome to March Madness..,” is what one HARDI member company had to say during the March 2016 HARDI galvanized steel conference call held earlier today. He went on to say, “Brackets are an indication of what we are seeing – a lot of chaos out there… The [index name removed] base price is up 23 […]
The U.S. Department of Commerce released new foreign steel import license request for the month of March 2016. Based on data through the 22nd of the month imports are trending higher than the past two months. At this point, SMU believes imports for March will settle somewhere around 2.6 to 2.8 million net tons. If […]
Steel mills are still scrounging for ferrous scrap with little luck. We are hearing from our scrap sources that prices could be up as much as $30 per ton and we have even heard some numbers higher than $30. The net result will be more pressure on steel and steel prices as the mills scramble […]