Steel prices continued to rise over the past week. A number of buyers are reporting mills as being on allocation (or not open at this time) which is keeping prices very close to the announced levels made over the past two weeks. In some cases, buyers are reporting mills as asking for premiums above the […]
The following is a quick update on the status of the flat rolled trade cases (hot rolled, cold rolled and corrosion resistant) and what are the next important dates to remember. The corrosion resistant, which covers galvanized, Galvalume and related products such as galvanneal and aluminized, are scheduled to have the Final Determination by the […]
The following is one of the monthly analyses Steel Market Update does on key commodities and raw materials which impact steel prices: iron ore, scrap, coking coal as well as zinc and aluminum. Prices of the various commodities have been rising over the past month which is a net positive for the steel industry. The […]
We should see the pace of the price increases slow down as most mills are getting the announced minimum price levels from their spot buyers ($25.00-$26.00/cwt HR, $35.00/cwt cold rolled and coated). The market needs a couple of weeks to absorb the increases and push them down to the end users and resale spot customers. […]
Every month Steel Market Update plugs in the MSCI shipment and inventory data for flat rolled steel and we run it through our model to determine if service centers are carrying too much inventory and by how much. We then forecast where we believe shipments and inventories will go over the next few months. From […]
The states compile their employment numbers independently of the Feds, then both are reported by the Bureau of Labor Statistics. The results are close. In the last thirteen quarters since Q1 2013, the Feds reported total job creation of 8,948,000 and the states reported 8,610,400. There is a difference in these reports that shrinks the […]
Both these data points are reported in the Federal Reserve G17 data base. This month the historical data has been revised and we have updated our files back to January 2000. The index had an all-time high of 106.40 in January 2015 but on a month over month basis has declined for 13 of the […]
There is still no light at the end of this tunnel except for coated products which have had three months of shipment growth on a tons / day, (t / d) basis. Total service center carbon steel shipments increased by 142,100 tons in March to 3.176 million tons. This increase was driven by the number […]
The Metal Service Center Institute (MSCI) reported Canadian steel service centers inventories dropped 1.9 percent by the end of March compared to the end of February. Shipments of steel (all products) were 392,200 tons and averaged 17,800 tons per day during the month of March. Total steel shipments were 11.3 percent lower than year ago […]
Total steel and flat rolled inventories declined during the month of March according to just released data provided by the Metal Service Center Institute (MSCI). U.S. steel service centers shipped a total of 3,333,300 tons of steel products during the month of March. Based on a 23 shipping days this equates to a 144,900 tons […]
One of the issues confusing the sheet (flat rolled steel) marketplace is the Raw Steel Production report produced by the American Iron & Steel Institute (AISI). This report is produced on a weekly and then again on a monthly basis. The weekly report is released every Monday afternoon and Steel Market Update publishes the data […]
On Friday, US Steel announced a $60 per ton flat rolled steel price increase. This was the first US Steel announcement done in public in some time. The increase came in the form of a letter emailed to their customers. U.S. Steel did not provide minimum base price guidelines in their announcement although minimum price […]
All of the steel indexes we follow reported flat rolled steel prices this past week with each showing major double digit gains for the domestic steel mills hot rolled, cold rolled, galvanized, Galvalume and plate. Hot rolled prices surged with each index reporting at least a $34 per ton increase (+$35 for Platts and +$40 […]
Manufacturing companies are questioning the run up in steel prices with some wondering if now is a good time to pull back and wait out the market. SMU, with the help of a few of our manufacturing and service center sources, will try to put a historical perspective into the market in an effort to […]
This week’s newsletters may seem a little “muted” compared to the past, this is due to my right hand man – Brett Linton – being on vacation. Brett is the one responsible for keeping track of all of the data points and graphics in both the newsletter and website. He is also responsible for crunching […]
The following article on the hot rolled coil (HRC), busheling scrap (BUS), and financial futures markets was written by Dave Feldstein. As Flack Steel’s director of risk management, Dave Feldstein is an active participant in the hot rolled coil (HRC) futures market and we believe he will provide insightful commentary and trading ideas to our […]
I will be doing an article in Sunday evening’s newsletter about the AISI capacity utilization numbers. The AISI produces their “estimate” of steel production and the percentage of capacity utilization based on 50 percent (or fewer) of the mills reporting production data. I have considered not publishing the data at all because, in my opinion, […]
This was one of the most difficult weeks to analyze flat rolled steel prices due to a number of factors. There were some “deals” available a few days ago (but after last Tuesday when we last indexed pricing) that no longer exist. How much weight do we give those deals? There are a number of […]
Is Now the Time to Panic as Steel Mills Control Their Order Books? The flat rolled steel markets continue to march to their own drummer. Lead times are extending, spot flat rolled steel prices are rising and many of the mills are not opening their order books for spot business. There are a number of […]
The Association of Steel Distributors (ASD), which in March celebrated its 73rd anniversary, swore in Andrew (Andy) Gross, President & CEO of Alliance Steel as the new President of the ASD during its spring meeting held in Naples, Florida earlier this month. The new ASD president told SMU that he wants to expand the exposure […]
Written by: John Packard, Publisher of Steel Market Update. Packard has 31 years of steel sales experience in the steel industry in the service center, trading company and steel mill segments of the industry. The Truth About Selling Steel is series of articles dedicated to those interested or involved with the process of selling (with […]
You will be hearing and seeing much more about whether China should be allowed to have “market economy” status. While I don’t pretend to be an expert on the subject, I am learning that as a market economy any trade suits against China would have to be conducted differently than what is currently being done […]
Manufacturing companies were almost unanimous when asked what service centers were doing with prices to them right now. Eighty one percent of the manufacturing companies responding to our survey reported distributors as raising prices. As you can see by the graphic below this is a tremendous change in price direction and market pricing momentum. It […]
Over the last week flat rolled steel prices continue to increase and, with the latest price announcement coupled with a number of mills having their spot order books closed, the pace seems to have gathered more steam. With the exception of plate (where a dumping suit was filed this past week) all of the flat […]
We only have a few spots left for our upcoming Steel 101: Introduction to Steel Making & Market Fundamentals workshop. If you or your company has interest in attending the May 17-18, 2016 workshop, which will be located in Sylvania, Ohio (just outside of Toledo) at the Wingate Hotel, please register online or contact our […]
Based on our analysis of the most recent flat rolled steel market trends survey conducted by Steel Market Update this week, we continue to find buyers and sellers of steel being very optimistic. The current market index improved to +70 which is the highest (most optimistic) number ever recorded by our Sentiment Index going back […]
SSAB became the second domestic steel mill to announce a price increase, taking plate prices up by $60 per ton on all new spot orders. The mill also took their hot rolled coil pricing up by $60 per ton. This is the first announcement by a plate mill since the 16th of March when SSAB […]
Not all regions of the country have settled but we are seeing ferrous scrap prices increasing to the domestic mills by $40 to $55 per gross ton. The variance is depending on region and at what point prices started. Out of the Midwest and Southeastern markets we heard from one of our sources, “It’s been […]
Steel buyers were pulling out their hair earlier today due to the number of mills holding tons off the market as they try to determine what the new pricing should be on hot rolled, cold rolled, galvanized and Galvalume products. As of early this afternoon (Thursday) steel buyers were informing Steel Market Update of a […]
Steel mill lead times on all four flat rolled products have become more extended, according to those who responded to our most recent flat rolled steel market analysis. As lead times extend, steel buyers have to place more orders in order to protect their inventories. The more orders placed, the better chance for the domestic […]