Late last week the International Trade Commission (ITC) temporarily suspended the Section 337 case brought by United States Steel (USS) against China, pending consultations with the Department of Commerce. ITC Administrative Law Judge Dee Lord stated that two of the three causes of action brought by USS (evasion of antidumping and countervailing duty orders and […]
We discovered earlier today that our office phones (including our 800 number) are down and calls are not being transferred or going to voicemail. We are in touch with Comcast to get the issue resolved. Although we understand it is a system wide failure not just our phones. In the meantime, if you need to […]
Flat rolled steel industry participants continue to be optimistic about the markets, according to the recent flat rolled market trends analysis conducted by Steel Market Update. However, we are seeing a slightly less optimistic trend for this time of year compared to what we were reporting at the same point in time in 2014 and […]
As reported last week, obsolete grades of ferrous scrap came under price pressure as negotiations concluded for July deliveries. Prime grades, however, saw prices move sideways as the spread between shredded scrap and primes increased. The product that saw the most movement was shredded due to excessive inventories and little movement on the export front […]
Buyers and sellers of flat rolled steel are not believers that the next move will be for higher flat rolled steel prices over the next couple of months. At least that is what the respondents to our most recent flat rolled steel questionnaire believe. Based on the analysis of last week’s survey, 60 percent of […]
Flat rolled steel prices continued to trade within a relatively narrow range this past week according to the steel indexes followed by Steel Market Update. Benchmark hot rolled coil was reported as being down $8 per ton by our own index while Platts has kept the product stable for yet another week. SMU HRC average […]
Many of those associated with the steel mills believe this week will be the one where buyers come back to the market after having taken a couple of weeks off for holiday. We will see if the buyers return or if the erosion of scrap prices (at least obsolete grades) will be enough to start […]
Since 2008, Steel Market Update has been measuring how steel buyers and sellers feel about their company’s ability to be successful in the existing market environment (which we call “Current Sentiment”). We also probe the same group of manufacturers, steel service centers, steel mills, trading companies and toll processors on how they feel about their […]
Galvanized steels continue to see strong bookings at the domestic steel mills with August sold out at all but SDI, The Techs and Wheeling Nisshin according to SMU sources. One of the domestic mills told Steel Market Update earlier this week that coated products were on “autopilot” as bookings remain strong and they were not […]
On Tuesday of this week Steel Market Update began canvassing the flat rolled steel industry through the use of our online survey which we use twice per month. We invited slightly more than 550 people to participate as we try to analyze market trends. One of the key areas of inquiry is that of lead […]
A second key subject addressed in our flat rolled steel survey regards negotiations between the domestic steel mills and their customers. We ask manufacturing companies and steel service centers to comment on whether their domestic mill suppliers are willing to negotiate spot steel pricing on hot rolled, cold rolled, galvanized and Galvalume steels. The less […]
An executive with one of the larger scrap companies told us that trading finally got under way in the Southeast over the past 24 hours. We were told, “Scrap trading got underway in the Southeastern markets late yesterday and today. While demand remained intact for the most part, bearish sentiment seems to be on the […]
Flat rolled prices were relatively flat for yet another week as the 4th of July holiday kept buyers and sellers thinking of something other than buying and selling steel. Steel Market Update is picking up signs of slowing order books at a number of mills as the number of “inquire only” products begins to dwindle […]
Flat rolled steel prices seem to have stabilized, even if there was some see-sawing among the indexes followed by Steel Market Update this past week. Benchmark hot rolled prices are hovering close to $630 per ton with SMU ($627.50 per ton), SteelBenchmarker ($627) and Platts ($630) all within $3 per ton of each other. Last […]
To our USA customers welcome back from your 4th of July holiday. I saw this quote while doing some research this afternoon, “Fun is one of the most important and underrated ingredients in any successful venture” (Richard Branson) This is something I have believed in for my entire steel career. Speaking of fun, we have […]
Steel Market Update received the following question from one of our new readers who has a specific project related to sourcing of hot rolled and cold rolled steels from outside of the United States. Based on our conversation with the reader we believe this question is being raised at this time due to the wide […]
I happen to be traveling this week and weekend. I am in Maine where in my youth my family used to vacation. Maine is a beautiful state to visit if you have not been here. I want to take a moment to wish all of my U.S.A. readers a safe and happy 4th of July […]
The flat rolled markets are trying to find where, and what direction, prices should be moving. After being down slightly last week, this week prices are up slightly. There is no clear-cut focus to the market at this moment. As one service center purchasing director put it to us this afternoon, “[Pricing] is all need […]
I want to thank everyone who has gone to the effort of registering early for our Steel Summit Conference. We are exceeding expectations having already registered three times as many people as we had at this time last year. If you have not yet registered we have provided a listing of the companies attending (so […]
Both Platts and Steel Market Update saw flat rolled steel prices as dropping this past week. The question now is this the beginning of a correction or just a bump in the road? From the perspective of ArcelorMittal USA and NLMK USA this is just a bump. If the drop in steel prices continue this […]
We were a little surprised on Friday when the International Trade Commission (ITC) announced they had reached a unanimous decision on the CORE (corrosion resistant) trade case. This one is important because the first ITC ruling on cold rolled from Japan and China was a slam dunk. Neither country chose to defend themselves and basically […]
We purposely did not begin this article on where our sources are seeing ferrous scrap prices with an attention grabbing headline as we think readers would be confused. The confusion comes from the pressure the domestic steel mills are expected to put on obsolete grades, like shredded scrap and HMS (heavy melt scrap). Those of […]
The reaction to the latest round of price increase announcements out of ArcelorMittal USA and NLMK USA got one of our readers fired up. After reading Tuesday evening’s issue of Steel Market Update they penned their thoughts on price increases and imports, especially imports out of the “2nd tier guys”: I just finished reading last […]
I am working on an article about the difficulties manufacturing companies face when trying to recoup a portion (or all) of the flat rolled steel price increases from their customers. This morning I spoke with a manufacturing entity in the building materials segment of the industry who reported their industry has taken prices up by […]
Today two mills began advising their customers of their intention to raise flat rolled steel prices. ArcelorMittal USA and NLMK USA both came out with increases. ArcelorMittal provided specific base price “minimums” while NLMK USA advised their customers of a flat $30 per ton increase. If all of the other mills follow, this would be […]
Flat rolled steel prices slipped this week even as ArcelorMittal USA announced new spot pricing for the month of August. Steel Market Update (SMU) has been noticing a “topping” of the market over the past few weeks and our expectation is for the market to be a little “sloppy” in the coming weeks. We do […]
Once a month Steel Market Update participates in a steel conference call hosted by HARDI. The wholesalers associated with HARDI supply galvanized steel and other products to the mechanical contractors involved in residential, multi-family, light commercial and commercial construction around the country. The purpose of the call is to better understand the galvanized steel markets […]
Manufacturing companies reported steel service center spot prices as continuing to rise this past week. Seventy-eight percent of the manufacturing companies responding to our mid-June flat rolled steel market trends questionnaire said distributors were continuing to raise spot prices on flat rolled steel. The service centers themselves were less optimistic with only 51 percent of […]
Flat rolled steel inventories being held by U.S. steel service centers have moved from an Apparent Excess to a Deficit based on our analysis of the recently released data by the Metal Service Center institute (MSCI). We have been reporting on the reduction of the Apparent Excessive inventories being held at flat rolled steel distributors […]
Two steel mills announced price increases today. This is the beginning of the 6th round of increases since the first announcement in early December 2015. However, unlike past announcements this one just doesn’t “feel” the same. We are not seeing a rush to buy (unless it was a special deal at much less than the […]