On Wednesday SSAB, Nucor and ArcelorMittal USA all announced a $40 per ton price increase on plate products. In a letter emailed to their customers Nucor advised of their intention to increase plate prices with: Effective immediately, the Nucor Plate Mill Group will increase transaction prices on all new orders for carbon, alloy and heat-treated […]
Every year Keith Gunter of McElroy Metal produces a Christmas poem dedicated to recent steel events and wishes for the New Year. Take a moment to enjoy this year’s spin on the old classic, Twas the Night Before Christmas: T’was almost Christmas,So time to reflect on the year,Cost has had its ups and downs,But has […]
Scrap prices still appear to be up anywhere from $40 per ton (very early deals) to as much as $50 per ton with most of the deals done late this week in the +$50 range. Dealers have sold all of the scrap they want to dispose of during the month of December. One of our […]
Flat rolled steel prices continued their march higher after the 4th price increase announcement set the bar at $600 per ton for hot rolled and $820 per ton on cold rolled and coated steels. The total of the four increases is a “minimum” of $140 per ton going back to the first announcement made on […]
There has been a flurry of activity over the past 24 hours with our sources suggesting that the very early trades on ferrous scrap were done up $30 to $45 per gross ton. As we slide into late Tuesday our sources were advising that the numbers could be up as much as $50 per gross […]
Earlier today Dr. Alan Beaulieu of the Institute for Trends Research spoke to the HARDI annual conference in Colorado Springs, Colorado. He started by telling the 1300 people attending the conference, “We did not change our forecast due to the election.” He went on to say that in government things don’t happen quickly, “The economy […]
Today, the U.S. Department of Commerce released Final Census Data for October 2016 as well as license data for November and early December. Since there have only been 6 days of licenses collected for December we are going to ignore that data for now and will report on December next week. October foreign steel imports […]
The following analysis of the steel markets in China is from Beijing Metal Import & Export Co.,Ltd and is being reproduced by Steel Market Update with permission: Please allow us to update China steel market (Nov 28 – Dec 04, 2016) as usual as following: In the past week, China markets still stood at high […]
I am sitting in Colorado Springs, Colorado after having spent the last few days attending the HARDI annual conference. I have been a member of HARDI and have participated in their steel committee for many years. After I stopped selling steel and began Steel Market Update as my main focus I was invited to remain […]
Flat rolled steel prices continued to increase this past week with both Steel Market Update and Platts reporting steady to upward movements for all products. The average hot rolled price between SMU and Platts is $560 per ton (up $10 over last week), and the average cold rolled price is $775 per ton (up $18 […]
Late in the day on Wednesday, Nucor and NLMK USA advised their customers of their intention to raise spot flat rolled prices by an additional $40 per ton. This follows ArcelorMittal’s announcement on Tuesday of specific minimum base price levels of $600 per ton hot rolled, $820 per ton cold rolled and coated steel products […]
Ferrous scrap prices are poised to increase to the domestic steel mills and negotiations are under way. The domestic mills did not cancel the open orders that have not yet been delivered which is a sure sign that they expect prices to be higher in December than what they negotiated in November. A pig iron […]
The first thing that jumps out at you when reviewing the end of the month data for November is the pace of the price index averages as they push toward $600 hot rolled (which we believe we may hit by the end of the calendar year). Our monthly average at $522 per ton was $11 […]
Today is Monday, please allow us to update you on the China steel market (Nov 21 – Nov 27, 2016) as usual as follows: In the past week, the market still kept rising heavily. It is out of our expectations as many non-market factors pushed spot prices to stand at very high levels. 1. China […]
During the process of completing our questionnaire all of those invited first get to respond to a number of questions aimed at all of our respondents. Then we segregate the respondents into their appropriate groups where they respond to questions specifically designed for each group. The two largest groups are manufacturing companies and steel service […]
In September Steel Market Update forecast October shipments of flat rolled steel out of the service centers would total 2,049,000 tons. According to the Metal Service Center Institute (MSCI) the actual total came in at 2,099,000 tons. SMU forecast flat rolled inventories to total 4,800,000 tons at the end of October. The actual number was […]
NLMK USA has gotten the go-ahead on a new walking beam furnace for the Pennsylvania plant. Some pre-construction has already begun. James Baker, Jr. told us in an email, “We will be installing a walking beam furnace in Farrell. We have already started on initial site prep with target completion date of September 2018. There […]
Today ArcelorMittal USA announced new minimum base price levels for orders of hot rolled, cold rolled and coated products. This is the 4th flat rolled steel price announcement since late October. The announcement takes base prices to the following minimum levels: Hot Rolled = $600 per ton ($30.00/cwt) Cold Rolled = $820 per ton ($41.00/cwt) […]
Steel Market Update (SMU) spend the last 24 hours researching the flat rolled steel markets in an effort to come to a resolution on what the price spread is on hot rolled, cold rolled, galvanized and Galvalume steels. We found about 90-95 percent of the buyers reporting the domestic steel mills as “firm” in their […]
Steel Market Update went out to a couple of hundred steel buyers and executives today as we probe for information about flat rolled steel prices. At the same time we asked questions about price direction and demand. Tonight we will cover price direction (prior to AM increase announcement) and on Thursday we will cover their […]
One of our main Asian contacts provided SMU with a brief glimpse as to what is happening in China this week: No major changes in Ore prices until after the New Year… Waiting to see if the Chinese Government makes any Regulation changes after New Year. You know this is a normal SAGA around this […]
The U.S. Department of Commerce (DOC) reported Preliminary Census Data for the month of October which came in at just under 2.7 million tons (2,681,608 net tons). At the same time the DOC updated license data which we warned last week was being over-stated at close to 3.0 million net tons. According to the license […]
As of late this afternoon www.Kitco.com was reporting zinc spot pricing around $1.22 per pound. Zinc recently reported prices not seen in the past 9 years and those of you buying galvanized and Galvalume steels need to be aware of how zinc is trading. The U.S. steel mills published new extras just as zinc pierced […]
Twice per month Steel Market Update (SMU) conducts a survey of the flat rolled steel markets. We invite close to 600 people representing approximately 550 companies spread out around the United States and Canada. We concentrate on two main steel buying groups: manufacturing companies and service centers/wholesalers. Our most recent market trends analysis was completed […]
Flat rolled steel prices continued their march higher this past week with both SMU and Platts reporting movement in the average prices of hot rolled, cold rolled, galvanized, Galvalume and plate products. Platts moved their prices by large double digits this past week. Platts took hot rolled up $35 per ton, cold rolled up $45 […]
Every two weeks Steel Market Update publishes an analysis of flat rolled steel mill lead times by product. In our last newsletter we told our readers that those responding to our questionnaire just before Thanksgiving said hot rolled lead times were averaging 4.18 weeks from the time a new order is placed until the steel […]
Flat rolled steel service centers and wholesalers sell material into what is called the “spot” market. The spot market is where a service center customer buys material at whatever price the market will bear in order to fill a short term need. Over the years Steel Market Update has found that when flat rolled steel […]
In the past foreign steel imports have been a key component to the health of the domestic manufacturing base in the United States. Foreign steel helps keep U.S. steel mill pricing reasonably competitive with the world steel markets. The domestic steel mills do not have the ability to produce all of the steel needed when […]
This evening’s issue is a bit different than most Sunday evenings. With the Thanksgiving Holiday and most steel-related businesses being closed on Friday the amount of direct news was limited. We do have a couple of articles about new home sales. oil rigs and durable goods but, I spent a good portion of my 5 […]
Flat rolled steel prices continue to move as the steel buyers absorb the three increases announced by the domestic steel mills going back to October 21st. Most buyers are telling Steel Market Update that this week is relatively quiet due to the Thanksgiving Holiday but the mill remain steadfast in their resolve to garnish higher […]