It’s time to wish a happy birthday to the flat rolled steel price rally that was born one year ago. It’s official. The rally in flat rolled steel prices has lasted one year and may have more room to grow. On Aug. 11, 2020, Steel Market Update reported benchmark spot hot rolled coil prices averaging […]
The U.S. Senate passed the $1 trillion infrastructure bill. The bill includes $550 billion in new spending. The bill calls for $110 billion for roads, bridges and major infrastructure projects. It also includes $40 billion for bridge repair and replacement, $39 billion to modernize public transit, $66 billion for passenger and freight rail, $65 billion to […]
We are seeing the early signs of a market where flat rolled steel prices are either peaking or about to top out. Last week, I spoke about service center spot prices into their end customers. I mentioned that both the manufacturing companies, and the service centers themselves, were beginning to report spot prices as being […]
There are now two weeks to go before the start of the 2021 SMU Steel Market Update Conference, which will begin at 9 a.m. ET at the Georgia International Convention Center (GICC) on Aug. 23. I do not have an update on the registrations since Thursday of last week when we had more than 950 […]
When we reported steel prices on Tuesday, we noted that for the first time in a year we saw mixed results with some prices rising, one remaining the same and one dropping. We did not change our Price Momentum Indicator. However, we noted that we were carefully watching the markets to see when we would […]
Looking for Signs One year ago, benchmark hot rolled prices bottomed at $440 per ton ($22.00/cwt). Since then, steel prices have been on a tear with spot hot rolled more than four times higher at nearly $1,900 per ton ($95.00/cwt). The net result from this 52-week march higher is the way steel buyers view the […]
Looking for Signs One year ago, benchmark hot rolled prices bottomed at $440 per ton ($22.00/cwt). Since then, steel prices have been on a tear with spot hot rolled more than four times higher at nearly $1,900 per ton ($95.00/cwt). The net result from this 52-week march higher is the way steel buyers view the […]
There are three weeks left before the start of the 2021 SMU Steel Summit Conference at 9 a.m. on Aug. 23. The amount of effort and thought being put into this one event is monumental. The pandemic, and the resistance by some Americans to being vaccinated, has provided new challenges this year as we make our […]
There are three weeks left before the start of the 2021 SMU Steel Summit Conference at 9 a.m. on Aug. 22. Even so, our virtual platform opened this morning which allows registered attendees to interact with one another directly through the platform. We have 900+ registered executives from manufacturing, steel distribution, steel mills, trading companies, toll […]
On Monday, Aug. 2, Steel Market Update will open the 2021 SMU Steel Summit Conference platform to all fully registered attendees. The platform, which was used to conduct last year’s conference and is being used for our virtual workshops, is replacing the App we have used in the past. Our virtual platform will enhance the conference […]
2021 SMU Steel Summit Conference – Revised Agenda as of July 27, 2021 The 2021 SMU Steel Summit Conference will be held at the Georgia International Convention Center on Aug. 23-25. The convention center is conveniently located next to the Atlanta International Airport (ATL). The center and the hotels surrounding the convention center are on […]
Last week our average price on hot rolled coil (HRC) was $1,850 per ton ($92.50/cwt). We are not far away from $2,000 per ton ($100.00/cwt). The idea of HRC at $100.00/cwt is so far out of my historical perspective. I go back to the late 1970s when HRC sold under $10.00/cwt…. Jeez. I saw an […]
Last week our average price on hot rolled coil (HRC) was $1,850 per ton ($92.50/cwt). We are not far away from $2,000 per ton ($100.00/cwt). The idea of HRC at $100.00/cwt is so far out of my historical perspective. I go back to the late 1970s when HRC sold under $10.00/cwt…. Jeez. I saw an […]
This evening we published our SMU Mill Lead Times by Product analysis. I recently received a few questions on the subject: How do we gather our lead time data? Do we take into consideration the lead times being published by the individual domestic steel mills? How do we feel the information we report is indicative […]
Mark Millett, CEO of Steel Dynamics, had some interesting comments in this morning’s earnings conference call with analysts. Based on his comments, the domestic steel industry is capable of producing 90-95 million tons of steel annually. The demand for steel is closer to 120 million tons; in extremely strong markets in the past it has […]
Mark Millett, CEO of Steel Dynamics, had some interesting comments in this morning’s earnings conference call with analysts. Based on his comments, the domestic steel industry is capable of producing 90-95 million tons of steel annually. The demand for steel is closer to 120 million tons; in extremely strong markets in the past it has […]
One of the products developed by Steel Market Update over the past four years is our flat rolled and plate steel service center inventories and shipment analysis. I discussed it briefly in Thursday’s newsletter, but I want to go into more detail as I believe it is a report that many of you will want […]
One of the products developed by Steel Market Update over the past four years is our flat rolled and plate steel service center inventories and shipment analysis. I discussed it briefly in Thursday’s newsletter, but I want to go into more detail as I believe it is a report that many of you will want […]
Steel Market Update reported our service center inventories and shipment data to our data providers today. Our Premium level members will get the report at 1 p.m. ET tomorrow. I can whet your appetite by telling you that flat rolled inventories on a days of supply basis rose slightly, but are not yet at what […]
To those of you in the United States, welcome back from the Fourth of July Holiday. For those of you in Canada, Mexico and elsewhere, thank you for bearing with us as we took our last holiday prior to our conference at the end of August (23-25). Square Peg in a Round Hole? As we move […]
Square Peg in a Round Hole? As we move about speaking to steel buyers, I get the impression they want to live by the rules of the market that have been in place for most of the last 30+ years. Flat rolled and plate steel buyers believe world steel prices will ultimately impact U.S. steel […]
There will be no Steel Market Update published on Sunday, July 4th, due to the national holiday (USA). We will resume coverage on Tuesday, July 6th. We wish everyone a safe holiday filled with family and friends (at least for those who have been vaccinated). Interesting comments received earlier this week from a steel executive whom I […]
Interesting comments received earlier this week from a steel executive whom I know well, and I respect his opinions. The topic of the day was one that I know drives the steel mills crazy – steel analysts’ price projections. Many of the analysts are calling for prices to peak within the next 60 days (in […]
The 2021 SMU Steel Summit Conference is seven weeks away and the SMU and CRU events teams are fully focused on making this year’s event one to remember. As always, the place to be on Aug. 23-25 will be the Georgia International Convention Center, which is located right next to the Atlanta International Airport (ATL). […]
The 2021 SMU Steel Summit Conference is seven weeks away and the SMU and CRU events teams are fully focused on making this year’s event one to remember. As always, the place to be on Aug. 23-25 will be the Georgia International Convention Center, which is located right next to the Atlanta International Airport (ATL). […]
As we return to offices and in-person contact after more than a year of pandemic-induced anxiety, it is important to recognize the young people within your organization who stand out as the next generation of leaders. These are young people who already know how to inspire others, to lead by example, and to develop innovative […]
The deadline to nominate a promising young standout from your organization for this year’s SMU NexGen Leadership Award is Friday, July 16. You can recognize those 35 years or younger whose drive, determination and leadership are making a difference by nominating them for the 2021 SMU NexGen Leadership Award this week. The award is sponsored by the […]
Once Produced…Can We Even Get It Shipped? Transportation issues continue to plague the flat-rolled and plate steel markets. It’s bad enough that many steel mills are running one to four weeks late against their original promise date. We are hearing once the steel is produced it can take days to weeks of waiting for a […]
Once Produced…Can We Even Get It Shipped? Transportation issues continue to plague the flat-rolled and plate steel markets. It’s bad enough that many steel mills are running one to four weeks late against their original promise date. We are hearing once the steel is produced it can take days to weeks of waiting for a […]
Change in the air…? We are beginning to hear of more hot rolled being available in the spot market. We are not (yet) hearing of mills taking prices below $1,680 per ton (which was the bottom of our range last week). During last week’s SMU Flat Rolled and Plate Steel Market Trends Survey, we noted […]