A couple of weeks ago, ArcelorMittal USA announced price increases taking flat rolled steel base prices on hot rolled to $625 per ton and $41.25/cwt base on cold rolled and galvanized. We have yet to see spot prices out of the domestic steel mills reach the prices suggested by AMUSA. The rest of the industry […]
On Monday, SSAB sent a letter to customers advising of the company’s intention to raise spot transaction prices by a minimum of $40 per ton ($2.00/cwt) effective immediately. The increase covers all “…As-Rolled Mill Plate, Cut-to-Length Plate >72”, Hot Rolled Coils >72”, as well as Normalized and Quenched & Tempered Plate.” SSAB also advised that […]
On Monday, SSAB sent a letter to customers advising of the company’s intention to raise spot transaction prices by a minimum of $40 per ton ($2.00/cwt) effective immediately. The increase covers all “…As-Rolled Mill Plate, Cut-to-Length Plate >72”, Hot Rolled Coils >72”, as well as Normalized and Quenched & Tempered Plate.” SSAB also advised that […]
I am in Chicago this evening having conducted a shortened version of our Steel 101 workshop at the FABTECH conference. We had a good group of people who were totally unaware of Steel Market Update and, in many cases, were attending to gain more knowledge about the steels their company uses. We had energy people […]
Twice per month, Steel Market Update (SMU) conducts an analysis of the flat rolled steel markets and trends associated with those who buy and sell hot rolled, cold rolled, galvanized, Galvalume and steel plate. One of the key areas we review is how steel service centers are handling spot pricing to their end user customers. […]
Ferrous scrap prices for the month of November began coming into focus on Friday with SMU scrap sources advising prime grades as being down $10 per gross ton compared to October levels. Obsolete and cut grades were reported as trading sideways (same prices as October). Not all regions are trading at the same pricing or […]
Flat rolled steel prices moved higher, while steel plate prices slipped this past week, according to the steel indexes followed by Steel Market Update. Benchmark hot rolled price averages exceeded $600 per ton ($30.00/cwt) on both Platts ($620 per ton) and Steel Market Update (SMU), which was a little lower at $605 per ton. SteelBenchmarker […]
Some quick final thoughts this evening – I will be traveling tomorrow (Monday) to Chicago to attend FABTECH and to teach a mini-version of our Steel 101 workshop (they call it Steel 101: Mill to Fabricator) on Tuesday afternoon. John Eckstein and I will be in Room 502B in McCormick Place, and the workshop is […]
After price increase announcements, it is important to follow steel mill lead times (and other keys) as a way of seeing if the increases are being seriously considered by steel buyers. The farther and faster lead times move out, the more support for the price increases announced by the domestic steel mills. Steel Market Update […]
According to the buyers and sellers of flat rolled steel, the domestic steel mills are willing to negotiate spot steel prices. The percentages of those reporting the mills as willing to negotiate has shrunk, but continues to be well above 50 percent. This is a bit of a surprise considering the price announcements made in […]
Another reminder that mill metallurgist and Steel 101 instructor John Eckstein and I will be in Chicago next week for FABTECH 2017. We will be conducting a mini-version of our Steel 101 workshop during the expo. Our workshop will be held in the McCormick Place Convention Center in room 502 B on Tuesday, Nov. 7, […]
We have been watching the market very carefully looking for signs of a complete change in momentum, which would spur prices to move higher over time. We are finding hot rolled and cold rolled prices strengthening at the lower end of the range, and there have been some adjustments to coated products on a weekly […]
Today the U.S. Department of Commerce released foreign steel import license data for the month of October. Based on the license data imports for October will be approximately three million net tons. This is essentially unchanged from the 3,050,618 net tons reported as Preliminary Census Data for September. As you can see by the table […]
The month of October is now behind us and here are some of the key pieces of data either produced by or followed by Steel Market Update. As the month ended, our Price Momentum Indicator continues to point toward Neutral (meaning there is not a strong enough “push” to prices that will force them higher […]
We began sending out our sponsorship package to last year’s sponsors and will send it out to previous years sponsors as well as those who have expressed an interest in becoming a sponsor or exhibitor. We have a limited number of sponsors and already have commitments from Pacesetter, Bank of America Merrill Lynch, Magic Coil […]
As we approach the end of October, SMU wanted to update our readers on the flat rolled inventory information we have been collecting from the steel service centers in the United States. At the end of July, we began gathering the number of months of supply being held at a select number of service centers. […]
Flat rolled steel prices were seen as bouncing higher, according to the Platts steel indices. Platts had hot rolled up $22 per ton to $613.75 (we rounded it to $614), while SteelBenchmarker was down $10 to $600 per ton. Steel Market Update reported HRC down $5 to $580 per ton. We saw a similar change […]
We did a quick check of lead times at a number of domestic steel mills on Friday of this past week. This is what we learned: Steel Dynamics Industries (SDI) – Butler, Ind. HR – closed for November production Pickled – closed for November production CR – closed for November production HRG – 11/20 (4 […]
Steel Market Update (SMU) will begin our next flat rolled steel market trends survey at 8 AM ET tomorrow (Monday). If you receive an invitation, please take a few moments to click on the button in the message and fill out our questionnaire. Most people are able to get through the process in less than […]
When Steel Market Update (SMU) began talking to our ferrous scrap sources over the past couple of days, we got a variety of opinions as to where prices will go for the month of November. From the East Coast we heard sideways was the most likely direction with a little “slightly stronger” for prime grades […]
When Steel Market Update (SMU) began talking to our ferrous scrap sources over the past couple of days, we got a variety of opinions as to where prices will go for the month of November. From the East Coast we heard sideways was the most likely direction with a little “slightly stronger” for prime grades […]
Twice per month, Steel Market Update conducts an analysis on the flat rolled steel market. Our focus is on pricing and price direction, demand, inventory management, international steel, buyers’ sentiment, service center spot price direction, mill lead times and negotiations, and more. We have been conducting our market analysis going back to late 2008. The […]
We are three months away from our Mobile, Ala., Steel 101 workshop and we are sold out. Having said that, I would recommend that if you want to attend, add your name to our wait-list. You can do that on our website by clicking on the registration link; after you are advised that the workshop […]
It has only been one week since ArcelorMittal USA increased flat rolled steel prices. As the week progressed, it became obvious that steel mills were reacting to the price announcements in different ways. We heard from steel buyers that some mills withdrew open quoted pricing and repriced at new levels at least $40 per ton […]
Steel Market Update (SMU) found steel buyers receptive to speaking their minds on how various steel mills are responding to the price increase announcements made last week. It appears mills with shorter lead times are perhaps a little more receptive to waiving part or all of the increases. Other mills have better order books and […]
The trend for foreign steel imports into the United States continues to be right at 3 million net tons for the month of October. The U.S. Department of Commerce (DOC) updated license data collected for the month of October through today, Oct. 24. We take the license data for the first 24 days of the […]
Last week, Steel Market Update (SMU) conducted one of our flat rolled steel market trends analyses, sending invitations to 655 executives associated with the manufacturing, steel distribution, steel mills, trading companies and toll processor segments of the industry. The majority of respondents completed the questionnaire prior to the ArcelorMittal USA price increase announcement. One of […]
The Mario Briccetti article entitled: “Steel Buyers Basics: Kobe Steel Problems and How to Avoid Them” prompted a number of comments. The comments all came from other Steel 101 instructors who spent their careers working for steel mills either in sales or in quality/metallurgical positions. We should have an interesting discussion between our instructors at […]
Many of the domestic steel mills raised prices on Tuesday and Wednesday of this past week. ArcelorMittal USA lead the way by announcing specific “minimum” base prices on hot rolled ($625 per ton), and cold rolled and galvanized steels ($825 per ton each). The other mills all announced $40 per ton price increases (which to […]
The following is an editorial from The Detroit News published on Saturday, Oct. 21, 2017. You can go to the original article by clicking here. One of the things President Donald Trump likes to boast about — and has a right to — is the performance of the economy since he took office in January. […]