This morning, Steel Market Update adjusted our Price Momentum Indicator on flat rolled from Neutral to Higher. Our Price Momentum Indicator was last adjusted on Jan. 28, 2019, when we moved from Lower to Neutral as the domestic steel mills, led by Nucor, began announcing price increases. It is normal for SMU to adjust our […]
This morning Nucor announced another $40 per ton ($2.00/cwt) “minimum” price increase on flat rolled steel products. The mill advised their customers the increase was to be “effective immediately.” This is the second price increase announcement out of Nucor in less than 30 days. On Jan. 28, 2019, Nucor announced a $40 per ton ($2.00/cwt) […]
A few weeks back I was having a conversation with the head of commercial for one of the domestic steel mills. The conversation centered around the influence Steel Market Update was having on their order book. In particular, the discussion focused on the SMU Price Momentum Indicator. I was told when our indicator moves to […]
The domestic steel mills have been able to put a floor on flat rolled steel prices since Nucor announced their $40 per ton price increase on Jan. 28, 2019. Now that they have a firm floor, the mills are slowly moving prices higher. In the process, they are very slowly shifting momentum. Steel Market Update […]
I am chomping on the bit as today we managed to book a nationally known and widely recognized speaker who will (I hope) hold everyone in their seats until the end of our SMU Steel Summit Conference. When booking your travel to Atlanta for our conference, you will want to arrive as early Monday morning […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: On Friday, President Trump signed into law the Consolidated Appropriations Act, 2019, the spending bill that averts a second government shutdown. The legislation, which funds government operations through Sept. 30, 2019, essentially keeps spending at fiscal 2018 levels, but […]
It’s time to start thinking (and planning) for what you, your family and your company are going to do should the United States and China fail to reach a trade agreement. The Trump administration has threatened to impose 25 percent tariffs on $250 billion worth of products produced by Chinese factories. So far, President Trump […]
Earlier this week I was at the Port of Tampa Steel Conference as I was asked to be the master of ceremonies, and I also moderated the two main panels on Wednesday morning. Both panels dealt with trade issues with the primary focus being on the Section 232 tariffs on steel. The Port of Tampa […]
I am in Tampa, Fla., where I will be the master of ceremonies and the moderator of two panels regarding trade and trade policy at the 30th Port of Tampa Steel Conference. Originally, I was only going to moderate one panel, but weather in the Northeast has fouled up air travel and the original moderator’s […]
Flat rolled steel distributors have been slowly backing away from offering spot prices to their end customers at lower numbers than what was seen a couple of weeks ago. At the same time, these same service centers are reporting difficulties getting those same end user customers to pay higher prices, despite the price increase announcements […]
Flat rolled steel distributors have been slowly backing away from offering spot prices to their end customers at lower numbers than what was seen a couple of weeks ago. At the same time, these same service centers are reporting difficulties getting those same end user customers to pay higher prices, despite the price increase announcements […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: Section 232 tariffs are increasingly in the news. Today, I describe two issues that are central to the prosperity (and in many cases the survival) of steel-using manufacturers. Exclusions With the end of the government shutdown, the exclusion […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: Section 232 tariffs are increasingly in the news. Today, I describe two issues that are central to the prosperity (and in many cases the survival) of steel-using manufacturers. Exclusions With the end of the government shutdown, the exclusion […]
I continue to get mixed messages regarding the strength of the flat rolled steel market, and specifically lead times and pricing. I have heard from a number of steel buyers of longer lead times on galvanized at a couple of mills. The strength does not yet seem to be universal. Neither is the weakness. For […]
There is a considerable amount of information/debate happening in Washington, D.C., Canada, Mexico, China and Europe regarding tariffs either in place or being threatened by the Trump administration. We included a press release in tonight’s issue that was sent out by Wilbur Ross of the U.S. Department of Commerce earlier this week. U.S. Trade Representative […]
The 2019 SMU Steel Summit Conference will be the premier flat rolled and plate steel conference in North America during this calendar year. It is a fabulous networking event. It is located in an exception venue adjacent to the Atlanta International Airport. It will be held on August 26-28 right at the critical time when […]
The 2019 SMU Steel Summit Conference will be the premier flat rolled and plate steel conference in North America during this calendar year. It is a fabulous networking event. It is located in an exceptional venue adjacent to the Atlanta International Airport. It will be held on Aug. 26-28, right at the critical time when […]
One constant I am hearing during my phone and email conversations is that January was a good month for shipments and February has started out strong. The construction community is pleasantly surprised, and I really have not heard anyone say business is bad in any market segment. One of the mills pointed out that much […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: Congress started the year in international trade by introducing bills to limit presidential authority to order import restrictions. There are two significant pieces of legislation in the House and one in the Senate. I will briefly summarize the […]
It’s Super Bowl Sunday and I expect everyone’s focus is on the game and not on business. Mine, and my team’s, will be as well. Here’s hoping for a great game and that the best team wins (without any help from the referees). Because of the game, and the desire for not only your family […]
We have many new members as well as those on trials of our newsletters and website. I want to take a couple of minutes and explain what “final thoughts” means as it relates to this newsletter and Steel Market Update in general. Since I first started writing the Steel Market Update newsletter, I wanted a […]
Last week, Steel Market Update conducted our mid-January flat rolled and plate steel market trends analysis. One of the areas of interest to SMU was how manufacturing companies and service centers would peg spot pricing coming out of the distributors to their end customers. Prior to the New Year, just below 75 percent of the […]
What an interesting week it has been, and it’s only Tuesday. As previous articles have already stated, Nucor, U.S. Steel, NLMK USA and ArcelorMittal (verbally) have joined California Steel and USS/POSCO by announcing $40 per ton price increases on flat rolled. For those of you who are new to the industry or to our newsletter, […]
I have read a number of articles recently claiming steel prices have gone back to the levels they were when the Section 232 tariffs were announced. This is somewhat deceiving as the domestic mills had been pushing prices up prior to the announcement. A better benchmark would be to use the historical average on hot […]
The plate markets have been acting quite differently than the hot rolled markets for some time. As hot rolled prices have eroded, plate prices have stabilized, with discrete plate trading around $1,000 per ton, delivered to the mill’s customer. We are seeing the dynamics of the plate markets changing, and SMU wants to be careful […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: The Court of International Trade (CIT) has rejected the U.S. Commerce Department’s finding that a “particular market situation” justifies steep antidumping margins against South Korean exports of oil country tubular goods (OCTG) to the United States. In a […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: The dust hasn’t settled yet from the partial government shutdown that ended Friday night. Already, though, thoughts turn to the issues that divide us as a country. As a trade person, I naturally focus on that issue. You do […]
Nope, I have not yet changed my position on the flat rolled market and where I am seeing momentum. Demand is good, sentiment is just “ok” for lack of a better term. I am seeing a little weakness in the plate market, but come on, the spread between plate and hot rolled is way too […]
On Monday, California Steel Industries (CSI) and USS/POSCO (UPI) advised customers of their intention to take spot prices on flat rolled products produced by the two mills up by $40 per ton ($2.00/cwt). This is the first price announcement out of either mill since October 2018. So far, there have not been any announcements out […]
On Monday, California Steel Industries (CSI) and USS/POSCO (UPI) advised customers of their intention to take spot prices on flat rolled products produced by the two mills up by $40 per ton ($2.00/cwt). This is the first price announcement out of either mill since October 2018. So far, there have not been any announcements out […]